Kolcraft EQ005 User Manual

Mid Century 3 Drawer Dresser Assembly Instructions

Commode style milieu du siècle à tres tiroirs Instructions d’assemblage

Cómoda de 3 cajones de mediados de siglo Instrucciones de montaje

©2014 Made under license from Sealy Technology, LLC ©2014. Fabrication autorisée par Sealy Technology, S.A.R.L. www.sealybaby.com Manufactured for Kolcraft Enterprises, Inc. Fabriqué pour Kolcraft Enterprises, Inc.

Q033

Parts:

Left Side

Back

Right Side

3x Left Drawer Side

3x Right Drawer Side

3x Drawer Front

Face Frame

Top

3x Drawer Bottom

3x Drawer Back

6x Drawer Knob

6x Drawer Knob Screw

2x Side Brace

26x Metal Clip

(H) Metal Clip

For help during assembly, scan here

QuickBlocks:

Your new Sealy dresser uses our unique QuickBlock system: the easiest, fastest, strongest tool-free furniture assembly hardware available anywhere.

QuickBlocks consist of three parts: a male block, a female block, and a metal clip.

To assemble a joint, slide the two blocks together, then press the Metal Clip (M) over the two pieces until it’s tight. When applying the metal clips throughout the dresser assembly, always slide the end with the raised bump onto the blocks first.

(N) Side Brace

Step 1:

(M) Metal Clip

To prevent scratching, assembly on carpet or another soft surface is recommended.

A. Align a Side Brace (N) with the Back (C) and slide the blocks together. B. Repeat for the other Side Brace. C. Slide a Metal Clip (M) over each joint to secure the connection, remembering to slide the

end with the raised bump onto the blocks first.

(A) Left Side

(M) Metal Clips

Step 2:

A. Align the Left Side (A) with the Back (C) and slide the blocks together. B. Slide a Metal Clip (M) over each joint to secure the connection, remembering to slide the

end with the raised bump onto the blocks first.

(B) Right Side

(M) Metal Clips

Step 3:

A. Align the Right Side (B) with the Back (C) and slide the blocks together. B. Slide a Metal Clip (M) over each joint to secure the connection.

(M) Metal Clips

(D) Face Frame

(M) Metal Clips

Step 4:

A. Align the Face Frame (D) with the sides and slide the blocks together. B. Slide a Metal Clip (M) over each joint to secure the connection. Don’t forget the two clips

attaching the Side Braces.

Attach all four

QuickBlocks

(E) Top

Step 5:

A. Align the Top (E) with the rest of the dresser and slide the blocks together. B. Reach in and slide a Metal Clip (M) over each joint to secure the connection.

(F) Drawer Front

Top of drawer front

Drawer groove faces in

(H) Right Drawer Side

Drawer glide faces out

Drawer Assembly Step 1:

A. Slide the Left Drawer Side (G) into the groove on the Drawer Front (F). Make sure the

drawer glide faces out. B. Slide the Right Drawer Side (H) into the other groove. Make sure the drawer glide faces out.

(I) Drawer Bottom

Support board faces out

Drawer Assembly Step 2:

A. Slide the Drawer Bottom (I) into the grooves along the bottoms of the drawer sides and

drawer front, with the support board facing out.

B. The drawer bottom should be completely secured in the groove of the drawer front.

(J) Drawer Back

Slide the drawer bottom into the groove of the drawer back.

Rotate drawer sides outward slightly

(I) Drawer Bottom

Seat drawer bottom firmly in groove

Drawer Back should be seated in all four grooves

Speed Clip blocks should be aligned

Drawer Assembly Step 3:

A. Rotate the drawer sides outwards slightly to give some clearance room to assemble the

drawer back. B. Starting on one end, slide the Drawer Bottom (I) into the Drawer Back (J) groove. Align the QuickBlock and dowels, pressing firmly together to connect the two pieces. C. Carefully work your way to the other drawer side, making sure the drawer bottom is securely aligned in the drawer back groove. Align the QuickBlock and dowels, pressing firmly together to connect the two pieces.

D. Slide a Metal Clip (M) over both QuickBlocks to secure the connection.

(K) Drawer Knob

(L) Drawer Knob Screw

Drawer Assembly Step 4:

A. Align the Drawer Knob (K) with the holes in the Drawer Front and thread the Drawer Knob Screw (L) into the knob. B. Repeat for the other knob. C. Tighten the screws with a Phillips screwdriver. D. Repeat Drawer Assembly Steps 1-4 for the other two drawers.

+ 25 hidden pages