Kohler W000357193 Specifications
ARCHERTM
Features
Acrylic
•
Integral apron with removable access panel
•
Blower motor with 300 W heater, and electronic user
•
control
Blower motor is supplied with a grounding-type
•
plug-in cord
Left or right drain
•
120 BubbleMassage
•
Integral tile flange
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
60″ (1524 mm) x 32″ (813 mm) x 19″ (483 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
CSA B45.5/IAPMO Z124
•
ASME A112.19.7
•
IAPMO IGC 171
•
ASTM E162
•
ASTM E662
•
Specified Model
5’ BUBBLEMASSAGETM BATH WITH
AIRJETS
K-1122-GRA
ALSO K-1122-GLA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
•
Model Description Colors/Finishes
K-1122-GLA Integral apron, left drain ❑ 0 ❑ Other_____
K-1122-GRA Integral apron, right drain ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Recommended Accessories
K-1446 Remote blower installation kit NA
Product Specification
The acrylic bath with airjets shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 19″ (483 mm) in height. Bath shall
shall have an integral apron and removable access panel. Bath shall have a blower motor with 300 W heater, and an electronic
user control. The blower motor shall have a grounding-type plug-in cord. Bath shall have left or right drain. Bath shall have 120
BubbleMassage airjets. Bath shall have an integral tile flange. Bath shall have slotted overflow for maximum bathing depth, low
threshold height, and integral lumbar support. Bath shall have armrests. The bath with airjets shall be Kohler Model
K-1122-_______-_______.
Page 1 of 2
1071361-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area,
top
Weight 100 lbs (45.4 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Blower
motor:
45-1/8″ (1146 mm) x 19-11/16″ (500 mm)
52-3/4″ (1340 mm) x 25-5/16″ (643 mm)
Heater V Hz A
300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (610 mm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 46 lbs/square foot (223 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
16"
(406 mm)
1-1/4"
(32 mm)
2-1/2"
(64 mm)
1-1/2"
Bath Drain
11-1/4"
11-1/4"
(286 mm)
(286 mm)
4-1/8"
(105 mm)
60" (1524 mm)
3/4" (19 mm)
3/4" (19 mm)
No change in measurements if connected with
drain illustrated. (K-7271 or K-7272)
1-1/4"
(32 mm)
1/2" (13 mm) R.
Integral Flange
Detail
32"
(813 mm)
19"
(483 mm)
Product Diagram
ARCHERTM 5’ BUBBLEMASSAGETM BATH WITH AIRJETS
Page2of2
1071361-4-
E
Loading...