ARCHERTM
Features
Acrylic
•
Integral apron with removable access panel
•
Blower with electronic control
•
Left or right drain
•
Blower motor is supplied with a grounding-type
•
plug-in cord
120 BubbleMassage
•
Integral tile flange
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
72″ (1829 mm) x 36″ (914 mm) x 19″ (483 mm)
•
TM airjets
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ICC/ANSI A117.1
•
CSA B45.5/IAPMO Z124
•
IAPMO IGC 171
•
ASTM E162
•
ASTM E662
•
UL 1795
•
6’ BUBBLEMASSAGETM BATH WITH
AIRJETS
K-1124-GLA
ALSO K-1124-GRA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Description Colors/Finishes
K-1124-GLA Integral apron, left drain ❑ 0 ❑ Other_____
K-1124-GRA Integral apron, right drain ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Recommended Accessories
K-1446 Remote blower installation kit NA
Optional Accessories
K-9529 Removable bath seat ❑ 0
Product Specification
The acrylic bath with airjets shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 19″ (483 mm) in height. Bath shall
feature an integral apron with removable access panel and integral tile flange. Bath shall have a blower with an electronic user
control. The blower motor shall have a grounding-type plug-in cord. Bath shall have 120 BubbleMassage
be available with left or right drain. Bath shall have slotted overflow for maximum bathing depth, low threshold height, integral
lumbar support, and armrests. The bath shall be Kohler Model K-1124-_______-_______.
TM airjets. Bath shall
Page 1 of 2
1071369-4-
USA/Canada: 1-800-4KOHLER
F
(1-800-456-4537)
www.kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area, bottom 51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
Weight 115 lbs (52.1 kg)
To overflow
Water depth 15″ (381 mm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Blower
motor:
(775 mm)
Heater V Hz A
300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (610 mm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
NOTICE: Relocation of the blower motor and check valve is
optional. Only mount the blower motor and check valve
together. Do not move one without the other.
NOTICE: Two access panels are required for blower motor
and check valve relocation. Provide one access panel at the
blow motor/control location and another at the control box.
Floor support under this product must provide for a minimum
of 42 lbs/square foot (201 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
No change in measurements if connected
with drain illustrated. (K-7272)
18"
(457 mm)
1-1/4"
(32 mm)
2-1/2"
(64 mm)
1-1/2"
Bath Drain
11-1/4"
(286 mm)
4-1/8"
(105 mm)
72" (1829 mm)
3/4" (19 mm)
Product Diagram
1-1/4"
(32 mm)
1/2" (13 mm) R.
Integral Flange
Detail
36" (914 mm)
19"
(483 mm)
ARCHERTM 6’ BUBBLEMASSAGETM BATH WITH AIRJETS
Page2of2
1071369-4-
F
Loading...