Kohler BANCROFT, VINTAGE, ELOSIS Installation Instructions Manual

-1-

BEFORE YOU BEGINBEFORE YOU BEGIN

·

·

·

·

Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-

Before installation carefully inspect the new fixture for any
signs of damage.

please leave instructions for the

consumer.

·

·

·

·

-

ORDERING INFORMATION

This installation covers the following products in the
BANCROFT, VINTAGE, ELOSIS mirrored cabinet range:

BANCROFT Mirrored Cabinet 2031BAN...............K-3892T

VINTAGE Mirrored Cabinet 2030VAS ...................K-3893T

ELOSIS Mirrored Cabinet 3526...........................K-15239T

2031BAN ...........................................

2030VAS ...........................................K-3893T

3526 ................................................

K-3892T

K-15239T

PARTS

Parts supplied with your cabinet. (For cabinet body and door
replacement, call customer service with model number.) Be
sure to check the cardboard supports in the carton, glass
parts are packed in them.

(),

.

, 2010

Copyright Kohler China Ltd., 2010

INSTALLATION INSTRUCTIONS

MIRRORED CABINET

K-3892T/K-3893T/K-15239T

BANCROFT

VINTAGE

ELOSIS

13-1 528437

1159769-T01-A

PARTS ON LEFT ARE USED WITH ALL CABINETS.

-2-

# 8 X 3/8 Side Kits Screws

#8 X 1 1/2 Phillips
Head Screws

Side Mirrors

4 Side Kits Brackets

Wall Anchors

Screw Caps S, W

Hole Plugs W

Top Clips

Snap-in Pins

#8 X 2 Hex Head Slotted Screws

4

#8X3/8

#8X11/2

S, W

#8X2

W

2 Glass Shelves
K-3892T, K-3893T

11 Mounting Bar for
K-3892T, K-3893T

ONE DOOR CABINET-Part list

280
K-3892T, K-3893T

2
K-3892T, K-3893T

DOUBLE DOOR CABINET-Part list

31 Mounting Bar for
K-15239T

787
K-15239T

2 Glass Shelves
K-15239T

2
K-15239T

ROUGHING-IN

UNIT : mm

760

508

K-3893T

805

508

K-3892T

664

890

K-15239T

122

1159769-T01-A

-3-

INSTALLATION

NOTE

For recess mount see instructions below.
For surfaces mount instructions see page4.
A surface mounted cabinet requires the optional

Mirror kit supplied with your cabinet.

·

·

·

·

·

·

()

1.

A.

1. Recessing the cabinet into the wall

A. The vertical installation changes the width of the roughout.

Please refer to the picture below.

25 1/4 high

Fig. 1 1

19 1/4 W for K-3892T, K-3893T Models
34 1/4 W for K-15239T Models
K-3892T, K-3893T 489
K-15239T 870

Mounting locationfor
#8x11/2 philips
head screws
#8

642

B. 1

#8

B. Install screws through holes in cabinet as shown in Fig.1

DO NOT OVER- TIGHTEN!
Use #8 x 1 1/2 Phillips head.

Note:

Top View

Stud and wall surface

Install dome caps over screws

Cabinet flange fits flush against wall

Fig. 2 2

1159769-T01-A