Kohler PA-215TFW, PA-ETF, PA-TFW, PA-215TF, PA-ETFW Product Manual

Shower Panels

Important! This manual is the property of the customer
and must be retained with the product for maintenance and
operational purposes.

Product Manual

1

INTRODUCTION

Rada Shower Panels are specied to meet the highest standards of safety, comfort

and economy as demanded by today’s users. All Rada products are designed,
manufactured and supported in accordance with accredited BS EN ISO 9001:2000
Quality Systems.

DESCRIPTION

A range of shower panels designed to deliver water consistently at a desired
temperature. All Rada Shower Panels in the range are available in a Stainless Steel

or White nish. Product Ranges (covered by this guide):

Rada PA-TF (stainless)
Rada PA-TFW (white)

A Rada Shower Panel with a TF 503
Timed Flow Control and a VR105 Shower
Head.

Rada PA-15TF (stainless)
Rada PA-15TFW (white)

A Rada Shower Panel with a Meynell
15/3 Shower Control, a TF 503 Timed
Flow Control and a VR105 Shower Head.

Rada PA-215TF (stainless)
Rada PA-215TFW (white)

A Rada Shower Panel with a Rada
215-t3 Shower Control, a TF 503
Timed Flow Control and a VR105
Shower Head.

Rada PA-ETF (stainless)
Rada PA-ETFW (white)

A Rada Shower Panel with a Rada Pulse
129 Sensor for connection to the Rada
Pulse Control Box.

Rada PA-V8F-LL & LR (stainless)
Rada PA-V8FW-LL & LR (white)

A Rada Shower Panel with a
Meynell V8 Shower Control and
a separate Adjustable Shower
Fittings kit. The fittings can be
connected on the left-hand (LL) or
right-hand (LR) side of the panel.

Rada PA-V8F (stainless)
Rada PA-V8FW (white)

A Rada Shower Panel with a Meynell
V8 shower Control and an Adjustable
Shower Fittings Kit.

Rada PA-V8VR2 (stainless)
Rada PA-V8VR2W (white)

A Rada Shower Panel with a Meynell
V8 Shower Control and a VR2 Shower
Head.

2

INSTALLATION

General

Installation must be carried out in accordance with these instructions, and must be

conducted by designated, qualied and competent personnel.

The installation must comply with the “Water Supply Regulations 1999 (Water Fittings)”

or any particular regulations and practices, specied by the local water company or

water undertakers.

Important! The instructions contained in this Product Manual refer to the installation
of the Shower Panel only. A separate Product Manual is supplied which contains in
more detail, the installation requirements, commissioning procedures and operating

instructions of the tted components. Read both Product Manuals before installing

your Shower Panel.

Installing the Shower Panel

1. Decide on a suitable location for the Panel, taking into account the height of

users of the Shower.

Important! If you are installing a pipe shroud accessory, refer to the pipe shroud

accessory installation instructions before continuing with the installation of your
shower panel.

2. Position the Mounting Bracket for the top of the Shower Panel on the wall, and
mark the position of the holes.

Note! Use a spirit level to make sure that the Mounting Bracket is horizontal.

3. For solid walls, drill with a 7 mm Masonry Drill (not supplied) and plug using
the Wall Plugs (supplied).

Note! For other types of wall structure alternative xings may be required.

4. Fix the Mounting Bracket to the wall using the Securing Screws (supplied).

5. Locate the Shower Panel onto the Mounting Bracket and mark the position of

the bottom holes.

6. For solid walls, drill with a 7 mm Masonry Drill (not supplied) and plug using
the Wall Plugs (supplied).

3

Wall Plugs

Securing Screws

Spirit Level

Wall Plugs

4