Kohler NEW IPSWICH C K-97794T, NEW IPSWICH C K-97779T, NEW IPSWICH C Installation Instructions Manual

BEFORE YOU BEGINBEFORE YOU BEGIN

( ) NEW IPSWICH C

INSTALLATION INSTRUCTIONS

CABINET

K-97779T/K-97794T

·

Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the

·

latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and

·

warranty information-

consumer.

·

IPSWICH bathroom cabinet adopts E1 grade wood-based
panel of high quality, and with further processing, its
harmful emissions will be less than 1.5mg/L.

Turn off the water supply.

·

The pluming installation must comply with Water Supply

·

Regulations/Bye-laws, Building Regulations or any
particular regulations and practices, specified by the local
water company or water undertakers. The installation
should be carried out by a plumber.
Before installation carefully inspect the new fixture for any

·

signs of damage.

please leave instructions for the

ORDERING INFORMATION

·

·

·

·

·

·

·

E1

1.5mg/L

-

This installation covers the following products in the NEW
IPSWICH range:

NEW IPSWICH C Cabinet 600mm ....................K-97779T

NEW IPSWICH C Cabinet 800mm ....................K-97794T

SAFETY: WARNINGS

Kohler products are precision-engineered and should give
continued superior and safe performance, provided:

1. They are installed, commissioned, operated and
maintained in accordance with the recommendations given
in this Manual.

2. Periodic attention is given, as necessary, to maintain the
product in good functional order. Recommended
guidelines are given in the section.

Carefully inspect the new fixture for any signs of damage.

When installing Kohler Products, manufacturers guidelines for
power tool safety should be followed.

MAINTENANCE

600mm...........................K-97779T

800mm...........................

1.

2.

K-97794T

1244199-T01-A

-1-

215500

, 2014

Copyright Kohler China Ltd., 2014

ROUGHING-IN

Reference Value

840

775

K-97794T

Cabinet 800mm

800mm

Kohler reserves the right to change marked dimensions without prior notice.

580

840

Fig.1

1

560

K-97779T

Cabinet 600mm

600mm

UNIT : mm

580

INSTALLATION

A. Install Washbasin Cabinet

Install the services.
Hot (H) and Cold (C) inlets must be connected to the correct
inlet pipes.
Install the drain in accordance with the manufacturer's
instructions.
We suggest using P-trap drain. Connect P-trap pipe with
washbasin drain.

CAUTION !

washbasin drain connections.

CAUTION !

connections for future plumbing maintenance.

NOTE

with isolating valves.

The hot and cold water supplies must be installed

Make sure a watertight seal exisits on all

Provide access to the plumbing

A.

(H) (C)

P

1244199-T01-A

Fig.2

2

-2-

1. Screw out four adjustable feet (see Fig.3). Place the
cabinet at a desired position in the bathroom, and then
adjust the four adjustable feet to put the cabinet in place.

1. 4 3

Go up

2. Mark the wall through two holes at the corresponding

positions. As Fig 4.

Go down

Fig.3

3

2. 4

8

3. Dismount the washbasin cabinet and put aside. Drill holes
at the marked position.

CAUTION!

Avoid the cables and pipes inner set when

drilling in the wall.

NOTE:

Different types of bolts are required for different
decoration boards. Please apply suitable bolts and
Plugs.

4. Insert the plugs into the wall.

5. Apply a washer to the screw before tighten it. Make sure

the washbasin cabinet has been fixed firmly on the wall.

1244199-T01-A

Fig.4

4

3.

4.

5. 8

-3-