Kohler Memoirs Stately 3 Hole Basin Mixer Installation And User Manual
P3907005
MemoirsStately3HoleBasin
Mixer
Installation and User Guide
MODEL NUMBERS
454W–3S 454W–4S 454W-4V
Important :- Please quote the above model number(s) when ordering spares.
IMPORTANT!
Installer: This manual is the property of the customer and must
be retained with the product for maintenance and operational
purposes.
CONTENTS
DESCRIPTION ......................................................................... 3
SAFETY : WARNINGS ........................................... .................. 3
DIMENSIONS ............................................................... ............ 4
SPECIFICATION ...................................................................... 5
Pressures ......................................................................... 5
Plumbing Connections ..................................................... 5
INSTALLATION ................................................................... ...... 6
Before You Begin ............................................................. 6
Install the Mixer ............................... ................................. 7
Installing the Drain ................................ ............... ............ 13
Install the Link for Drain ........................... ........................ 14
Finish The Installatio n ...................................................... 16
USER M A INTENANCE ............................................................ 17
Cleaning ........................................................................... 17
Ceramic Valve Replacement ............................................ 18
SPARE PARTS ......................................................................... 19
NOTES .... ........................................................................... ...... 23
CUSTOMER SERVICE ...................................................... ...... 24
Guarantee of Qua lity .................... .................................... 24
1023012-W2-B
2
DESCRIPTION
The Memoirs Stately 3 Hole Basin Mixer is a mixer for basins with mixer
holes between 200mm and 410mm centres. It has either cross handles or
lever handles, and has a pop-up drain with a lift rod and tailpiece.
SAFETY : WARNINGS
Kohler products are precision-engineered and should give continued
superior and safe performance, provided:
1. They are installed, commissioned, operated and maintained in
accordance with the recommendations given in this Manual.
2. Periodic attention is given, as necessary, to maintain the product in
good functional order. Recommended guidelines are given in the
MAINTENANCE section.
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines for power tool
safety should be followed.
1023012-W2-B
3
DIMENSIONS
P3907010/1
410mm MAX.
200mm MIN.
44mm
MAX.
29mm DIA.
46mm
STATELY
CROSS
HANDLE
STATELY
DECO
HANDLE
48mm
64mm
87mm
STATELY
LEVER
HANDLE
48mm
62mm
89mm
48mm
17mm
14mm
24mm
32mm
114mm
81mm
102mm
Pop-Up Drain
1-1/4" O.DIA.
102mm
67mm
54mm
48mm
64mm
83mm
1023012-W2-B
4
SPECIFICATION
Pressures
The minimum recommended operating pressure is 0.5 bar.
For optimum performance, a minimum operating pressure of 1.0 bar is
recommended.
Plumbing Connections
Hot (H) and Cold (C) inlets must be connected to the correct inlet supplies.
1023012-W2-B
5
INSTALLATION
Before You Begin
1. Turn off the water supply.
2. The plumbing installation must comply with Water Supply
Regulations/Bye-laws (Scotland), Building Regulations or any
particular regulations and practices, specified by the local water
company or water undertakers. The installation should be carried out
by a plumber or contractor who is registered with, or is a member
of an association such as:
Institute of Plumbing (IOP), throughout the UK.
National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
Scottish and Northern Ireland Plumbing Employers’ Federation
(SNIPEF), Scotland and Norther n Ireland.
3. Install the mixer before installing the basin.
4. Before installation carefully inspect the new fix tu re for a ny signs of
damage.
1023012-W2-B
6
Install the Mixer
P3907020
Apply Sealant
Metal Washer
Nut
1. Apply a ring of sealant to the underside of the spout in accordance
with the manufacturer’s instructions.
2. Fit the spout through the top of the basin.
3. Install the washer and the nut. Use a spanner to tighten the nut.
1023012-W2-B
7
P3907100
Concealing Plate
Fibre Washer
Locknut
4. Thread the locknuts half way down the valve bodies.
5. Slide the fibre washers over the valve bodies.
6. Insert the valve bodies into the mounting holes from the bottom of the
basin. Make sure that the valve body marked ‘COLD’ is installed in the
right hand hole (as viewed from the front of the basin).
7. Apply a r ing of sealant to the underside of the concealing plate in
accordance with the manufacturer’s instructions.
8. Thread the concealing plate onto the valve body.
1023012-W2-B
8
Loading...