Kohler KT68084DBN Specifications

Roughing-In

K-T6808, K-T6809, K-T6810

IV GEORGES BRASS

BATH AND SHOWER FAUCET TRIM

Product Information

Applicable faucet trim only: Bath and shower cross handle K-T6808-3D Bath and shower lever handle K-T6808-4D Shower cross handle K-T6809-3D Shower lever handle K-T6809-4D Valve cross handle K-T6810-3D Valve lever handle K-T6810-4D Rite-Temp

Required accessories: Rite-Temp HiFlow Rite-Temp valve with stops K-2971-KS Ceramic dial faceplate (For -3D and -4D) K-146 * For a complete listing of all the RiteTemp valves, refer

to the K-304-* Speciﬁcation Sheet or Roughing-In Sheet.

valve must be ordered to complete faucet.

valve without stops OR K-304-*

Optional accessories: IV Georges Brass accent kit (For K-6808-3D) K-6791 IV Georges Brass accent kit (For K-6808-4D) K-6798 Deep roughing-in kit for K-304 valve (lever

handles) Deep roughing-in kit for K-304 valve (cross

handles) HiFlow Rite-Temp

thin wall installation kit 88526

58223

58224

Installation Notes

Install this product according to the installation guide. NOTICE: Risk of product damage. Long screws, for

installing trim, can damage the K-2971-KS valve. Consult the trim installation guide to verify if the thin wall installation kit (88526) is needed.

Avoid cross-ﬂow conditions. Do not install shut-off device on either valve outlet.

Cap shower outlet if deck-mount spout, diverter, or handshower is connected to spout outlet.

Install straight pipe or tube drop of 7″ (17.8 cm) to 18″ (45.7 cm) with single elbow between valve and wall-mount spout.

1/2" NPT

6-3/8" (16.2 cm)

7-1/2" (19 cm)

4-7/8" (12.4 cm)

Top of Rim

72" (182.9 cm) 78" (198.1 cm) To Floor (Typical)

7-1/2" (19 cm) D.

10" (25.4 cm) To Spout (Bath Only)

48" (121.9 cm)

4" (10.2 cm)

To Floor (Shower Only)

3-1/4" (8.3 cm)

Cross

3-3/4" (9.5 cm)

Lever

IV GEORGES BRASS®BATH AND SHOWER FAUCET TRIM 111701-1-