|
K-T195, K-T197, K-T199 |
|
Roughing-In |
FALLING WATER |
|
WALL-MOUNT FAUCET |
||
|
|
|
Product Information |
Installation Notes |
|
Applicable product*: |
|
7-1/4² (18.4 cm) length spout |
K-T195 |
10-1/4² (26 cm) length, 3/4² OD spout |
K-T197 |
13-1/4² (33.7 cm) length spout |
K-T199 |
Lever handle is ADA compliant.
*K-307-K wall-mount valve is required.
Install this product according to the installation guide.
Install the wall-mount valve according to the valve installation guide.
A total of two 1-7/8² D. cut-out holes are required, one for the spout and one for the handle.
Fixture dimensions are nominal and conform to tolerances of ASME/ANSI standard A112.18.1.
Required accessory:
Wall-mount valve |
K-307-K |
not shown |
|
|
|
9" (22.9 cm) |
|
|
4" (10.2 cm) |
3-3/4" (9.5 cm) |
|
2-1/2" |
1-1/2" |
|
(6.4 cm) D. |
(3.8 cm) |
3-1/2" |
|
|
|
|
|
(8.9 cm) |
8-1/2" |
2" |
3-1/8" |
(21.6 cm) |
(5.1 cm) |
|
|
5-1/2" |
(7.9 cm) |
|
(14 cm) |
|
|
|
|
1-1/2" |
|
|
|
(3.8 cm) |
1-3/4" |
3-5/8" |
3-5/8" |
5/8" OD |
(4.4 cm) D. |
(9.2 cm) |
(9.2 cm) |
Cold Supply |
|
|
5/8" OD |
|
|
1-1/2" |
Hot Supply |
|
|
|
|
|
|
(3.8 cm) |
|
|
2-7/8" |
(7.3 cm) Min |
15/16" |
3-3/8" |
(8.6 cm) Max |
(2.4 cm) |
|
|
|
1-1/2" (3.8 cm) Min 2" (5.1 cm) Max
K-T195=7-1/4" (18.4 cm)
K-T197=10-1/4" (26 cm)
K-T199=13-1/4" (33,7 cm)
2" (5.1 cm) Min 2-1/2" (6.4 cm) Max
|
*1-1/2" (3.8 cm) to 6" (15.2 cm) must be maintained between |
Lever |
bottom of spout and top of fixture rim. |
FALLING WATER WALL-MOUNT FAUCET 086501-1-AB
Loading...