Kohler KT197BN User Manual

FALLING WATER
®
Features
Brass construction
Wall-mount installation
Single-control
ADA compliant lever handle
Stationary spout
Less drain
Available with a 10-1/4(26 cm) or 13-1/4(33.7 cm)
spout from wall to center of drain
1.5 gallons (5.7 liters) per minute maximum flow rate
Codes/Standards Applicable
Specified model meets or exceeds the following at date of manufacture:
ADA
ASME A112.18.1/CSA B125.1
ICC/ANSI A117.1
NSF 61
Energy Policy Act of 1992
All applicable US Federal and State material
regulations
Specified Model
WALL-MOUNT FAUCET TRIM
K-T197
ALSO K-T199
Colors/Finishes
CP: Polished Chrome
Other: Refer to Price Book for additional colors/finishes
Accessories
NA: None applicable
Model Description Colors/Finishes
K-T197 Wall-mount lavatory faucet trim – 10-1/4(26 cm) spout from wall to center of drain CP Other ____
K-T199
Required Accessories
K-307-K Single-control ceramic valve NA
Wall-mount lavatory faucet trim – 13-1/4(33.7 cm) spout from wall to center of drain
CP Other ____
Product Specification
The wall-mount lavatory faucet trim shall be of brass construction. Product shall have a maximum flow rate of 1.5 gallons (5.7 liters) per minute. Product shall be available with a 10-1/4(26 cm) or 13-1/4(33.7 cm) spout from wall to center of drain. Product shall feature a lever handle, stationary spout, and single-handle control. Product shall be for wall-mount installation. Product shall be less drain. Product shall require single-control ceramic valve [K-307-K]. Faucet shall be Kohler Model K-T___-___-___ with required single-control ceramic valve K-307-K.
Page 1 of 2 086501-4-
AC
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
FALLING WATER
Optional Accessories
K-7114 Undercounter pop-up lavatory drain with tailpiece OR CP K-7124 Touch activated lavatory drain with tailpiece OR CP K-7127 Lavatory drain with non-removable metal stopper and tailpiece – 3
rough OR K-7129 Lavatory grid drain with tailpiece CP Other_____ _____ Additional flow options are available (refer to the Kohler Price Book) NA
®
CP
Installation Notes
Install this product according to the installation guide.
Install the wall-mount valve according to the valve installation guide.
One 1-7/8(4.8 cm) diameter cutout hole is required for the spout. One 1-7/8(4.8 cm) diameter cutout hole is required for the handle.
8-1/2" (21.6 cm)
1-3/4" (4.4 cm) D.
9" (22.9 cm)
4" (10.2 cm) 3-3/4" (9.5 cm)
2-1/2" (6.4 cm) D.
3-5/8" (9.2 cm)
5/8" OD
1-1/2" (3.8 cm)
Hot Supply
2" (5.1 cm)
3-5/8" (9.2 cm)
1-1/2" (3.8 cm)
5-1/2" (14 cm)
1-1/2" (3.8 cm)
5/8" OD Cold Supply
3-1/2" (8.9 cm)
3-1/8" (7.9 cm)
2-7/8" (7.3 cm) Min 3-3/8" (8.6 cm) Max
1-1/2" (3.8 cm) Min 2" (5.1 cm) Max
K-T197=10-1/4" (26 cm) K-T199=13-1/4" (33.7 cm)
2" (5.1 cm) Min 2-1/2" (6.4 cm) Max
15/16" (2.4 cm)
Lever
Product Diagram
FALLING WATER®WALL-MOUNT FAUCET TRIM Page2of2
086501-4-
AC
*1-1/2" (3.8 cm) to 6" (15.2 cm) must be maintained between bottom of spout and top of fixture rim.
Loading...