![](/html/e9/e9fa/e9fa4274fedf12a7d1643d8bd6e6029f761626681df648e724b11781083c38f6/bg1.png)
FALLING WATER
®
Features
Brass construction
•
Wall-mount installation
•
Single-control
•
ADA compliant lever handle
•
Stationary spout
•
Less drain
•
Requires single-control ceramic valve [K-307-K]
•
Available with an 8-1/4″ (21 cm) or 10-1/4″ (26 cm)
•
spout from wall to center of drain
1.5 gallons (5.7 liters) per minute maximum flow rate
•
Codes/Standards Applicable
Specified model meets or exceeds the following at date of
manufacture:
ADA
•
ASME A112.18.1/CSA B125.1
•
ICC/ANSI A117.1
•
Energy Policy Act of 1992
•
NSF 61
•
All applicable US Federal and State material
•
regulations
Specified Model
WALL-MOUNT LAVATORY FAUCET
K-T196
ALSO K-T198
Colors/Finishes
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
•
TRIM
Model Description Colors/Finishes
K-T196 Wall-mount lavatory faucet trim – 8-1/4″ (21 cm) spout from wall to center outlet ❑ CP ❑ Other____
K-T198 Wall-mount lavatory faucet trim – 10-1/4″ (26 cm) spout from wall to center outlet ❑ CP ❑ Other____
Required Accessories
K-307-K Single-control ceramic valve ❑ NA
Product Specification
The wall-mount lavatory faucet trim shall be of brass construction. Product shall have a maximum flow rate of 1.5 gallons (5.7
liters) per minute. Product shall be available with an 8-1/4″ (21 cm) or 10-1/4″ (26 cm) spout from wall to center of drain. Product
shall feature a lever handle, stationary spout, and single-handle control. Product shall be for wall-mount installation. Product
shall be less drain. Product shall require single-control ceramic valve [K-307-K]. Faucet shall be Kohler Model K-T___-___-___
with required single-control ceramic valve K-307-K.
Page 1 of 2
116726-4-
AD
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
![](/html/e9/e9fa/e9fa4274fedf12a7d1643d8bd6e6029f761626681df648e724b11781083c38f6/bg2.png)
FALLING WATER
Optional Accessories
K-7114 Undercounter pop-up lavatory drain with tailpiece OR ❑ CP
K-7124 Touch activated lavatory drain with tailpiece OR ❑ CP
K-7127 Lavatory drain with non-removable metal stopper and tailpiece – 3″
rough OR
K-7129 Lavatory grid drain with tailpiece ❑ CP ❑ Other_____
_____ Additional flow options are available (refer to the Kohler Price Book) ❑ NA
®
❑ CP
Installation Notes
Install this product according to the installation guide.
Install the wall-mount valve according to the valve installation
guide.
One 1-7/8″ (4.8 cm) diameter cutout hole is required for the
spout. One 1-7/8″ (4.8 cm) diameter cutout hole is required
for the handle.
8-1/2"
(21.6 cm)
1-1/2" (3.8 cm) to
6" (15.2 cm) must
be maintained
between bottom of
spout and top of
fixture rim.
9" (23 cm)
4" (10.2 cm)
2-1/2"
(6.4 cm) D.
5/8" OD
Hot Supply
3-5/8"
(9.2 cm)
3-3/4" (9.5 cm)
2"
(5.1 cm)
3-5/8"
(9.2 cm)
1-1/2"
(3.8 cm)
3-1/2"
(8.9 cm)
5-1/2" (14 cm)
1-1/2" (3.8 cm)
5/8" OD
Cold Supply
K-T196=3-1/8" (7.9 cm)
K-T198=3-7/16" (8.7 cm)
3-3/8" (8.6 cm) Max
2-7/8" (7.3 cm) Min
1-1/2" (3.8 cm) Min
2" (5.1 cm) Max
K-T196=8-1/4" (21 cm)
K-T198=10-1/4" (26 cm)
1-3/4"
(4.4 cm) D.
Lever
2-1/2" (6.4 cm) Max
2" (5.1 cm) Min
1-7/8"
(4.8 cm)
15/16"
(2.4 cm)
Product Diagram
FALLING WATER®WALL-MOUNT LAVATO RY FAUCET TRIM
Page2of2
116726-4-
AD