![](/html/3e/3edd/3edd7f83d8b1c6d9527b707ad44bfa2f9a416606177b7fb97814aeed57c89146/bg1.png)
PURIST
®
Features
Brass construction
•
Available with cross or lever handles
•
Push-button diverter
•
35° and 90° spouts
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.18.1/CSA B125.1
•
ASSE 1016
•
Specified Model
BATH AND SHOWER FAUCET TRIM
K-T14420
ALSO K-T14421, K-T14422, K-T14423
Colors/Finishes
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
•
Model Description Colors/Finishes
K-T14420-3 Bath and shower trim, cross handle and 35° Spout (shown) ❑ CP ❑ Other ____
K-T14420-4 Bath and shower trim, lever handle and 35° Spout ❑ CP ❑ Other ____
K-T14421-3 Bath and shower trim, cross handle and 90° Spout ❑ CP ❑ Other ____
K-T14421-4 Bath and shower trim, lever handle and 90° Spout ❑ CP ❑ Other ____
K-T14422-3 Shower only trim, cross handle ❑ CP ❑ Other ____
K-T14422-4 Shower only trim, lever handle ❑ CP ❑ Other ____
K-T14423-3 Non-Diverter valve only trim, cross handle ❑ CP ❑ Other ____
K-T14423-4 Non-Diverter valve only trim, lever handle ❑ CP ❑ Other ____
K-T14501-3 Valve W/diverter only trim, cross handle ❑ CP ❑ Other ____
K-T14501-4 Valve W/Diverter only trim, lever handle ❑ CP ❑ Other ____
K-14426 35° Bath spout ❑ CP ❑ Other ____
K-14427 90° Bath spout ❑ CP ❑ Other ____
Product Specification
The Rite-Temp®pressure-balancing single-control bath and shower faucet trim shall be made of brass construction. Bath and
shower trim shall include showerhead with arm and flange, non-diverter spout with NPT connection, and faceplate with handle
and push-button diverter. Shower only trim shall include showerhead with arm and flange, and faceplate with handle. Valve only
trim shall include faceplate with handle. Faucet shall be K-_____-_____-_____ OR K-_____-_____, and Rite-Temp
shall be K-_____-_____-NA.
Page 1 of 2
1031692-4-
C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
®
valve
![](/html/3e/3edd/3edd7f83d8b1c6d9527b707ad44bfa2f9a416606177b7fb97814aeed57c89146/bg2.png)
PURIST
Required Accessories
K-304-* Rite-Temp
K-2971-KS HiFlow Rite-Temp valve with stops OR ❑ NA
K-11748-K Rite-Temp valve with diverter OR ❑ NA
K-11748-KS Rite-Temp valve with diverter and stops ❑ NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In Sheet.
Optional Accessories
88526 HiFlow Rite-Temp
1016154 Deep roughing-in kit for Rite-Temp
®
valve OR ❑ NA
®
thin wall installation kit ❑ CP Other ____
®
valve (lever and cross handles) ❑ CP Other ____
®
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Install this product according to the installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
4"
(10.2 cm) D.
1/2"-14
NPT
10-5/8" (27 cm)
6-1/2"
(16.5 cm) D.
_35
5-5/16"
(13.5 cm)
3-1/2"
(8.9 cm)
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between valve and wall-mount
spout.
72" (182.9 cm)
78" (198.1 cm)
To Floor (Typical)
4-7/16"
(11.3 cm)
Cross
Handle
4"
_35 Bath Spout
(10.2 cm) D.
1/2"-14
NPT
PURIST®BATH AND SHOWER FAUCET TRIM
Page2of2
1031692-4-
C
7-3/4" (19.7 cm)
Top of Bath
Lever
Handle
_90 Bath Spout
7-3/4" (19.7 cm)
Product Diagram
10" (25.4 cm)
To Spout
(Bath Only)
5-1/2"
(14 cm)
48" (121.9 cm)
To Floor
(Shower Only)