Kohler K58725UA1FT Specifications
Features
•
28-inch minimum base cabinet width.
•
KOHLER cast iron.
•
Acid-resistant enamel finish.
•
Under-mount.
•
Three oversized faucet holes with one oversized accessory
hole to the right and one oversized accessory hole to the left.
•
25" (635 mm) x 22" (559 mm)
Recommended Accessories
K-9000 P-Trap
Optional Accessories
K-6194 Utility Rack with Soaking Cup
K-6239 Colander with Cutting Board
K-6246 Cutting Board
K-8801 Sink Strainer
Under-mount Kitchen Sink
Codes/Standards
ASME A112.19.1/CSA B45.2
Riverby
®
K-5872-5UA1
Components
Product includes:
K-6238 Sink Rack
1054375 Under-mount Sink Kit, 23"
KOHLER® Enameled Cast Iron Kitchen
Sink - Lifetime Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Sea Salt™FF
Biscuit96
Almond47
Cane Sugar™FD
DuneNY
Ice™ Grey95
SandbarG9
Mexican Sand™33
CashmereK4
BasaltFT
Thunder™ Grey58
Suede20
Black 'n TanKA
CaviarFP
Black Black™7
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-21-2017 06:10
22"
Riverby
®
Under-mount Kitchen Sink
K-5872-5UA1
Technical Information
All product dimensions are nominal.
SingleBowl configuration:
Under-mount, Under-mountInstallation:
Bowl area (Only)
Length: 22-1/4" (565 mm)
Width: 15-13/16" (402 mm)
Bowl depth: 9" (229 mm)
5Number of deck holes:
2-3/8" (60 mm)Faucet hole(s):
3-7/8" (98 mm)Drain hole:
1172565-7, required, includedTemplate:
Notes
Install this product according to the installation
instructions.
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with the
product, or a current one provided by Kohler Co.
(call 1-800-4-KOHLER). Kohler Co. is not
responsible for cutout errors when the incorrect
cut-out template is used.
IMPORTANT! Use of the colander, wood cutting
board, and utility rack requires the "reveal" cutout
option on the cutout template.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-21-2017 06:10
Loading...