Kohler K45904CP Specifications

Features

CSA B651

OBC

•

For use in bath/shower and shower only installations.

•

Designed for new installations or retrofit to replace an existing installed shower arm.

•

For use with temperature/volume control mixing valve (not supplied).

•

For use with Kohler handshowers and shower hoses.

Material

•

Premium metal construction.

•

KOHLER finishes resist corrosion and tarnishing.

Installation

•

Wall-mount

•

Installs in less than 60 minutes without changes to in-wall plumbing (subject to condition of existing installation).

Optional Accessories

K-8593 72" Shower Hose K-9514 60" Shower Hose K-45981 Shower Hose K-45982 Shower Hose 1194630 1/2" NPT Deep Rough-in Kit 1187917 1/2" NPT Shallow Rough-in Kit 1194302 Large Escutcheon/Mounting Collar Kit

HydroRail

Shower Column

K-45904

Codes/Standards

ASME A112.18.1/CSA B125.1 ADA ICC/ANSI A117.1 CSA B651 OBC

KOHLER® Faucet Lifetime Limited Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 3-16-2018 02:41

DescriptionCodeColor

Polished ChromeCP

Vibrant® Polished NickelSN

Vibrant® Brushed NickelBN

Vibrant® Brushed BronzeBV

1-3/8" (35 mm) Min

HydroRail

Shower Column

K-45904

Technical Information

All product dimensions are nominal.

Notes

Install this product according to the installation guide.

Order deep roughing-in kit 1194630 if the distance from the elbow to the finished wall surface is between 2-7/8” (73 mm) to 4” (102 mm).

Order shallow roughing-in kit 1187917 if the distance from the elbow to the finished wall surface is less than 1-3/8” (35 mm).

A 3” (76 mm) escutcheon/mounting collar is supplied to fit a 1” (25 mm) to 1-1/4” (32 mm) supply connection hole diameter. Order 1194302 large escutcheon/mounting collar kit if the supply connection hole diameter is between 1-1/4” (32 mm) to 2-1/4” (57 mm).

ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.