Kohler K3351 User Manual

UNDERTONE

Features

18-gauge stainless steel

•

Double (equal) bowl

•

Under-mount

•

Includes installation hardware

•

Squared bowl(s)

• 29-1/4″ (743 mm) x 15-3/4″ (400 mm)

• 9-1/2″ (241 mm) deep left bowl and 7-1/2″ (191 mm)

•

deep right bowl (K-3351) 7-1/2″ (191 mm) deep left bowl and 9-1/2″ (241 mm)

•

deep right bowl (K-3351-L)

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

ASME A112.19.3/CSA B45.4

•

Speciﬁed Model

UNDER-MOUNT KITCHEN SINK

K-3351

ALSO K-3351-L

Colors/Finishes

NA: None applicable

•

Accessories

CP: Polished Chrome

•

0: White

•

NA: None applicable

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Model Description Colors/Finishes

K-3351 Under-mount sink with 9-1/2″ (241 mm) deep left bowl and 7-1/2″

K-3351-L Under-mount sink with 7-1/2″ (191 mm) deep left bowl and 9-1/2″

Optional Accessories

K-3190 Bottom bowl rack (for either bowl) ❑ 0 ❑Other_____ K-3277 Wire basket (for either bowl) ❑ 0 ❑Other_____ K-3294 Hardwood cutting board (for either bowl) ❑ NA

K-8801 Duostrainer

(191 mm) deep right bowl

(241 mm) deep right bowl

sink strainer ❑ CP ❑Other_____

❑ NA ❑ NA

Product Speciﬁcation

The under-mount sink shall be 29-1/4″ (743 mm) in length and 15-3/4″ (400 mm) in width. Sink shall be made of 18-gauge stainless steel. Sink shall be double (equal) squared bowl. Kohler Model K-3351 sink shall have 9-1/2″ (241 mm) deep left bowl and 7-1/2″ (191 mm) deep right bowl. Kohler Model K-3351-L sink shall have 7-1/2″ (191 mm) deep left bowl and 9-1/2″ (241 mm). Sink shall include installation hardware. Sink shall be Kohler Model K-3351-_______.

Page 1 of 2 114578-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

UNDERTONE

Technical Information

Dimensions shown for K-3351; sink dimensions are

opposite for K-3351-L. Fixture:* Bowl area Water depth Sink, left 14″ (356 mm) x

Sink, right

Drain Holes

* Approximate measurements for comparison only.

Included Components: Hardware kit (4 required) 91915 Cut-out template 1040556-7

16″ (406 mm) 14″ (356 mm) x

16″ (406 mm) Ø 3-5/8″ (92 mm)

9-1/2″ (241 mm)

7-1/2″ (191 mm)

Installation Notes

Install this product according to the installation guide.

15" (381 mm)

9-5/8" (244 mm)

8-1/8" (206 mm)

31-1/2" (800 mm)

15-1/4" (387 mm)

1-1/2" OD

1-1/8" (29 mm)

6-1/8" (156 mm)

18" (457 mm)

7-5/8" (194 mm)

13" (330 mm)

Countertop

Sink

Clip

2" (51 mm) Min*

* Allow clearance around sink rim for clip attachment.

Product Diagram

UNDERTONE®UNDER-MOUNT KITCHEN SINK Page2of2

114578-4-