Kohler K29550 User Manual

TRAVERSE

Features

Fireclay

•

Countertop installation

•

With overﬂow

• 8″ (20.3 cm) centers (-8), 4″ (10.2 cm) centers (-4),

•

single-hole (-1), or no holes Also installs to K-2517 vanity

• 30-1/2″ (77.5 cm) x 21-1/2″ (54.6 cm)

•

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

ASME A112.19.2/CSA B45.1

•

Speciﬁed Model

LAVATORY

K-2955

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Accessories

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Model Description Colors/Finishes

K-2955 Lavatory without faucet holes (for use with wall-mount faucet) ❑ 0 ❑ Other_____ K-2955-1 Lavatory with single faucet hole ❑ 0 ❑ Other_____ K-2955-4 Lavatory with 4″ (10.2 cm) centers ❑ 0 ❑ Other_____ K-2955-8 Lavatory with 8″ (20.3 cm) centers ❑ 0 ❑ Other_____

Recommended Accessories

K-8998 P-Trap ❑ CP ❑ Other_____

Product Speciﬁcation

The countertop lavatory shall be 30-1/2” (77.5 cm) in length, and 21-1/2” (54.6 cm) in width. Lavatory shall be made of Fireclay. Lavatory shall have single-hole (K-2955-1), 4″ (10.2 cm) centers (K-2955-4), 8″ (20.3 cm) centers (K-2955-8) or no holes (K-2955). Lavatory also installs to K-2517 vanity. Lavatory shall be Kohler Model K-2955-_______-_______.

Page 1 of 2 1092255-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

TRAVERSE

Technical Information

Fixture*: Basin area 12″ (30.5 cm) x 15-1/4″ (38.7 cm) Water depth 3″ (7.6 cm) Drain hole 1-3/4″ (4.4 cm) D. * Approximate measurements for comparison only.

Holes K-2955 K-2955-1 K-2955-4 K-2955-8 Spout N/A 1-3/8″

(3.5 cm) D.

Faucet N/A 1-1/4″

Included components: Cut-out template 1003676-7

1-1/4″ (3.2 cm) D.

(3.2 cm) D.

1-3/8″ (3.5 cm) D.

Installation Notes

Install this product according to the installation guide.

NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler (call 1-800-4-KOHLER). Kohler is not responsible for cutout errors when incorrect cut-out template is used.

NOTE: This lavatory is also designed for installation to the K-2517 vanity.

2-3/4" (7 cm)

14" (35.6 cm)

30-1/2" (77.5 cm)

3/8" Hot

4" (10.2 cm)

K-2955-8

4" (10.2 cm)

15-1/4" (38.7 cm)

1-1/4" OD

3/8" Cold

5-5/8" (14.3 cm)

13-1/8" (33.3 cm)

4" (10.2 cm)

5-1/4" (13.3 cm)

21-5/8" (54.9 cm)

10-7/8" (13.3 cm)

K-2955-4

4" (10.2 cm)

2-3/4" (7 cm)

K-2955-1

2-3/4" (7 cm)

K-2955

5-5/8" (14.3 cm)

TRAVERSE®LAVATORY Page2of2

1092255-4-

Product Diagram