Kohler K29550 Specifications

Roughing-In

K-2955

TRAVERSE

LAVATORY

Product Information

Applicable product: Lavatory without faucet holes (for use

with wall-mount faucet) Lavatory with single faucet hole K-2955-1 Lavatory with 4″ (10.2 cm) centers K-2955-4 Lavatory with 8″ (20.3 cm) centers K-2955-8

Fixture*: Basin area 12″ (30.5 cm) x 15-1/4″ (38.7 cm) Water depth 3″ (7.6 cm) Drain hole 1-3/4″ (4.4 cm) D. * Approximate measurements for comparison only.

Holes K-2955 K-2955-1 K-2955-4 K-2955-8 Spout N/A 1-3/8″

(3.5 cm) D.

Faucet N/A 1-1/4″

1-1/4″ (3.2 cm) D.

(3.2 cm) D.

K-2955

1-3/8″ (3.5 cm) D.

Included components: Cut-out template 1003676-7

Recommended accessories: P-Trap K-8998

Installation Notes

Install this product according to the installation guide.

NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler (call 1-800-4-KOHLER). Kohler is not responsible for cutout errors when incorrect cut-out template is used.

NOTE: This lavatory is also designed for installation to the K-2517 vanity.

Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal.

2-3/4" (7 cm)

14" (35.6 cm)

30-1/2" (77.5 cm)

3/8" Hot

4" (10.2 cm)

K-2955-8

4" (10.2 cm)

15-1/4" (38.7 cm)

1-1/4" OD

3/8" Cold

5-5/8" (14.3 cm)

13-1/8" (33.3 cm)

4" (10.2 cm)

5-1/4" (13.3 cm)

21-5/8" (54.9 cm)

10-7/8" (13.3 cm)

K-2955-4

4" (10.2 cm)

2-3/4" (7 cm)

K-2955-1

2-3/4" (7 cm)

K-2955

5-5/8" (14.3 cm)

TRAVERSE®LAVATORY 1092255-1-