Kohler K221496 Specifications

LADENA

Features

Vitreous china

•

Under-mount

• ADA compliant when installed in a 21″ (533 mm)

•

minimum depth countertop With or without overﬂow

•

Includes 1193643 clamp assembly

• 18″ (457 mm) x 12″ (305 mm) [K-2214, K-2214-G]

• 21″ (533 mm) x 14″ (356 mm) [K-2215]

•

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

ASME A112.19.2/CSA B45.1

•

ICC/ANSI A117.1

•

ADA

•

Speciﬁed Model

UNDER-MOUNT BATHROOM SINK

K-2214

ALSO K-2215

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Accessories

CP: Polished Chrome

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Model Description Colors/Finishes

K-2214 Under-mount bathroom sink with overﬂow ❑ 0 ❑ Other_____ K-2214-G Under-mount bathroom sink with glazed underside, less overﬂow ❑ 0 ❑ Other_____ K-2215 Under-mount bathroom sink with overﬂow ❑ 0 ❑ Other_____

Recommended Accessories

K-8998 Adjustable P-Trap ❑ CP ❑ Other_____

Product Speciﬁcation

The under-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be 18″ (457 mm) in length and 12″ (305 mm) in width [K-2214, K-2214-G], or 21″ (533 mm) in length and 14″ (356 mm) in width [K-2215]. Bathroom sink shall be ADA compliant when installed in a 21″ (533 mm) minimum depth countertop. Bathroom sink shall be with overﬂow [K-2214, K-2215] or less overﬂow [K-2214-G]. Bathroom sink shall include 1193643 clamp assembly. Bathroom sink shall be Kohler Model K-______-______ or K-2214-G-______.

Page 1 of 2 106355-4-

USA/Canada: 1-800-4KOHLER

(1-800-456-4537)

www.kohler.com

LADENA

Technical Information

Fixture*: Basin area K-2214,

K-2214-G K-2215 20-7/16″ (519 mm) x

Water depth 4-5/8″ (117 mm) Drain hole Ø 1-3/4″ (44 mm) * Approximate measurements for comparison only.

Cutout template – K-2214 and K-2214-G 1053195-7 Cutout template – K-2215 1002977-7

Included components: Basin clamp assembly 1193643

18-3/8″ (467 mm) x 11-5/8″ (295 mm)

13-1/2″ (343 mm)

Installation Notes

Install this product according to the installation guide.

The product diagram is based on the K-8998 adjustable P-Trap with 1″ (25 mm) of tailpiece exposed.

NOTICE: Countertop manufacturer or cutter must use the current product template available at www.kohler.com, or by calling 1-800-4KOHLER. Kohler Co. is not responsible for cutout errors when the incorrect cutout template is used.

Will comply with ADA when installed per section 606 Lavatories and Sinks of the 2010 ADA Standards for Accessible Design.

4-3/4" (121 mm)

14" (356 mm)

Lof Fitting

13-3/4" (349 mm)

3/8" Hot

1-1/4" OD

Standard Installation

(X)

4" (102 mm)

1-1/8" (29 mm)

(Y)

1/2" (13 mm)

3/8" Cold

Sealant

3/8" (10 mm)

5/8" (16 mm)

8-1/8" (206 mm)

34" (864 mm)

Marble Installation

4" (102 mm)

27" (686 mm) Min

24" (610 mm)

8" (203 mm) Min

Wood Installation

6" (152 mm) Max

(229 mm) Min

Recommended ADA Installation

K-2214: (X)= 20-7/8" (530 mm), (Y)= 14-3/8" (365 mm) K-2214-G: (X)= 20-7/8" (530 mm), (Y)= 14-3/8" (365 mm) K-2215: (X)= 23-1/4" (591 mm), (Y)= 16-1/4" (413 mm)

Sealant

1" (25 mm) Max

LADENA®UNDER-MOUNT BATHROOM SINK Page2of2

106355-4-

Product Diagram