CAMBER®ARTIST EDITIONS
Features
Vitreous china
•
Self-rimming
•
Available without holes or with 10″ (25.4 cm) centers
•
or 12-3/8″ (31.4 cm) centers
21″ (53.3 cm) x 20-7/8″ (53 cm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.2/CSA B45.1
•
Specified Model
COUNTERTOP LAVATORY
K-14282
ALSO K-14283, K-14284
Colors/Finishes
0: White
•
W2: Earthen White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
CP: Polished Chrome
•
Model Description Colors/Finishes
K-14282 Water Lilies
K-14282-12 Water Lilies design with 12-3/8″ (31.4 cm) centers ❑ 0 ❑ Other ____
K-14283-BL Plum Blossom
K-14283-MG Mythical Beasts
K-14283-MP Mythical Beasts design with platinum border without holes ❑ 0
K-14283-WR Water Rhythm
K-14284-BL Plum Blossom design with 10″ (25.4 cm) centers ❑ 0
K-14284-MG Mythical Beasts design with gold border and 10″ (25.4 cm) centers ❑ 0
K-14284-MP Mythical Beasts design with platinum border and 10″ (25.4 cm) centers ❑ 0
K-14284-WR Water Rhythm design with 10″ (25.4 cm) centers ❑ W2
Recommended Accessories
K-8998 P-Trap ❑ CP
TM design without holes ❑ 0 ❑ Other ____
TM design without holes ❑ 0
TM design with gold border without holes ❑ 0
design without holes ❑ W2
®
Product Specification
The self-rimming lavatory shall be 21″ (53.3 cm) in length and 20-7/8″ (53 cm) in width. Lavatory shall be made of vitreous china.
Lavatory shall be available without holes, with 10″ (25.4 cm) centers, or with 12-3/8″ (31.4 cm) centers. Lavatory shall be Kohler
Model K-_______-_______-_______.
Page 1 of 2
1010384-4-
C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
CAMBER®ARTIST EDITIONS
Technical Information
Fixture*:
Basin area 14″ (35.6 cm) D.
Water depth 5″ (12.7 cm)
Drain hole 1-3/4″ (4.4 cm) D.
Faucet holes 1-3/8″ (3.5 cm) D.
Spout hole 1-3/16″ (3 cm) D.
*Approximate measurements for comparison only.
Included components:
Adjustable linkage 40372
Cut-out template 86562-7
K-14284
Installation Notes
Install this product according to the installation guide.
IMPORTANT! Due to the large size of the lavatory, a 21-1/8″
(53.7 cm) wide flat surface is required for installation on a
vanity top.
Lavatories without faucet holes require wall-mount faucets
with 7″ (17.8 cm) minimum spout length.
Supply dimensions are based on a 12″ (30.5 cm) riser which
may require cutting.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cut-out errors when the incorrect cut-out
template is used.
K-14283
2"
(5.1cm)
1-5/8" (4.1 cm)
12-1/2"
(31.8 cm)
14"
(35.6 cm)
3/8" Cold
5" (12.7 cm)
21" (53.3 cm)
1-1/4" OD
4" (10.2 cm)
10-5/8"
(27 cm)
1/2" (1.3 cm)
3/8" Hot
20-7/8"
(53 cm)
6-7/8"
(17.5 cm)
2"
(5.1 cm)
2-9/16"
(6.5 cm)
K-14282-12
6-3/16"
(15.7 cm)
K-14282
Product Diagram
CAMBER®ARTIST EDITIONS COUNTERTOP LAVATORY
Page2of2
1010384-4-
C