Kohler K14283MP0 Specifications

Roughing-In

K-14282, K-14283, K-14284

CAMBER

ARTIST EDITIONS

COUNTERTOP LAVATORY

Product Information

Applicable product: Lavatory without holes K-14282 Lavatory with 12-3/8″ (31.4 cm) centers K-14282-12 Lavatory without holes K-14283 Lavatory with 10″ (25.4 cm) centers K-14284

Fixture*: Basin area 14″ (35.6 cm) D. Water depth 5″ (12.7 cm) Drain hole 1-3/4″ (4.4 cm) D. Faucet holes 1-3/8″ (3.5 cm) D. Spout hole 1-3/16″ (3 cm) D. *Approximate measurements for comparison only.

Included components: Adjustable linkage 40372 Cut-out template 86562-7

Installation Notes

Install this product according to the installation guide. IMPORTANT! Due to the large size of the lavatory, a 21-1/8″

(53.7 cm) wide ﬂat surface is required for installation on a vanity top.

Lavatories without faucet holes require wall-mount faucets with 7″ (17.8 cm) minimum spout length.

Supply dimensions are based on a 12″ (30.5 cm) riser which may require cutting.

NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cut-out errors when the incorrect cut-out template is used.

Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal.

2" (5.1cm)

1-5/8" (4.1 cm)

12-1/2" (31.8 cm)

14" (35.6 cm)

3/8" Cold

K-14284

5" (12.7 cm)

21" (53.3 cm)

1-1/4" OD

4" (10.2 cm)

10-5/8" (27 cm)

1/2" (1.3 cm)

3/8" Hot

20-7/8" (53 cm)

6-7/8" (17.5 cm)

2" (5.1 cm)

2-9/16" (6.5 cm)

K-14283

K-14282-12

6-3/16" (15.7 cm)

K-14282

CAMBER®ARTIST EDITIONS COUNTERTOP LAVATORY 1010384-1-