Kohler K-1418-M User Manual
MEMOIRS
®
Features
Acrylic
•
Variable speed pump with 1.5 kW heater, back-lit
•
user keypad and remote control
6 Flexjets
•
Ten color-matched sequencing Bodyssage
•
Two pulsating neckjets with pillow
•
240 V, 20 A electrical service
•
UL listed
•
Color-matched jet trim included
•
Coordinating Memoirs
•
Drilled for K-9653 grip rails (required)
•
72″ (1829 mm) x 42″ (1067 mm) x 22″ (559 mm)
•
TM
TM backjets
Suite
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
UL 1795
•
ASTM E162
•
ASTM E662
•
ASME A112.19.7
•
CSA B45.5/IAPMO Z124
•
Specified Model
6’ EXPERIENCE BATH WHIRLPOOL
WITH MASSAGE PACKAGE
K-1418-M
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1418-M 6’ Experience bath whirlpool with Massage Package ❑ 0 ❑ Other_____
Required Accessories
K-9653 Grab bars (pair) ❑ CP ❑ PB ❑ Other_____
Recommended Accessories
K-7161-AF Adjustable pop-up brain ❑ CP ❑ PB ❑ Other_____
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 72″ (1829 mm) in length, 42″ (1067 mm) in width, and 22″ (559 mm) in height. Product shall
have 6 Flexjets, a variable speed pump, 1.5 kW heater, back-lit user keypad and remote control. Product shall have 10
color-matched sequencing Bodyssage backjets and 2 pulsating neckjets with pillow. Product shall be drilled for K-9653 grab
bars (required) and UL listed. Product shall coordinate with Memoirs
K-1418-M-_______.
Page 1 of 2
1025516-4-
F
Suite. Bath whirlpool shall be Kohler Model
®
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
MEMOIRS
®
Technical Information
Required Electrical Service
Fixture*:
Basin area:
Bathing area, bottom 42″ (1067 mm) x 27″ (686 mm)
Bathing area, top 60″ (1524 mm) x 30″ (762 mm)
Weight 140 lbs (64 kg)
To overflow:
Water depth 16″ (406 mm)
Capacity 86 gal (326 L)
* Approximate measurements for comparison only.
Pump: kW V A*
1.5 240 15
* Approximate measurements for comparison only.
Drop-in
cut-out
Minimum access panel (required):
Pump/control 34″ (864 mm) W x 15″ (381 mm) H
70-1/2″ (1791 mm) x 40-1/2″ (1029 mm)
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
44 lbs/square foot (214 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no
interference with drain overflow and circulating system before
drilling any holes. Consult local and national codes for
minimum air gap requirements if installing a spout on the
faucet deck.
This whirlpool is designed for drop-in installation only. It is not
suited for use in a three wall alcove with an overhead shower.
Pump/Control Access
11-3/4"
(298 mm)
36" (914 mm)
5-1/4" (133 mm)
72" (1829 mm)
3" (76 mm)
20-1/8"
(511 mm)
22"
(559 mm)
1-1/16" (27 mm)
1-1/2" OD
Product Diagram
MEMOIRS®6’ EXPERIENCE BATH WHIRLPOOL WITH MASSAGE PACKAGE
Page2of2
1025516-4-
F
42" (1067 mm)
3"
(76 mm)
2-7/8"
(73 mm)
Loading...