Kohler K1139R96 User Manual
PROFLEX®6036
Features
ExoCrylic
•
Drop-in or three-wall alcove
•
Six individually adjustable ProFlex
•
jets
Pump with air switch and grounding-type plug-in cord
•
Molded lumbar support and armrests for comfort
•
Optional K-9696 whirlpool trim kit in additional
•
finishes
Optional K-1284 removable apron
•
60″ (1524 mm) x 36″ (914 mm) x 18-1/8″ (460 mm)
•
TM
hydro-massage
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7/CSA B45.10
•
CSA B45.5/IAPMO Z124
•
UL 1795
•
Specified Model
WHIRLPOOL BATH
K-1139
ALSO K-1139-L, K-1139-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1139 Whirlpool bath – drop-in (shown) ❑ 0 ❑ Other_____
K-1139-L Whirlpool bath – tile flange, left drain ❑ 0 ❑ Other_____
K-1139-R Whirlpool bath – tile flange, right drain ❑ 0 ❑ Other_____
Recommended Accessories
K-11677 Swiftflo
Optional Accessories
K-1284 Removable apron ❑ 0 ❑ Other_____
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
TM adjustable trip lever bath drain ❑ CP ❑ PB
Product Specification
The ExoCrylic whirlpool bath shall be 60″ (1524 mm) in length, 36″ (914 mm) in width, and 18-1/8″ (460 mm) in height. Whirlpool
shall have six individually adjustable ProFlex hydro-massage jets, molded lumbar support and armrests for comfort, and pump
with air switch and grounding-type plug-in cord. Whirlpool shall be for drop-in [K-1139] or alcove [K-1139-L, K-1139-R]
installations. Whirlpool shall feature optional K-1284 removable apron and K-9696 whirlpool trim kit in additional finishes.
Whirlpool bath shall be Kohler Model K-1139-_____ or K-1139-____-____.
Page 1 of 2
1013749-4-
USA/Canada: 1-800-4KOHLER
F
(1-800-456-4537)
www.kohler.com
PROFLEX®6036
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 46″ (1168 mm) x 15″ (381 mm)
Basin area, top 55″ (1397 mm) x 25″ (635 mm)
Weight 55 lbs (25 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 57 gal (216 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 34-1/2″ (876 mm)
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (181 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
No change in measurements if connected with drain
illustrated. (K-11677)
18"
(457 mm)
8" (203 mm)
60" (1524 mm)
2-1/2"
(64 mm)
3"
(76 mm)
2-7/8"
(73 mm)
PROFLEX®6036 WHIRLPOOL BATH
Page2of2
1013749-4-
F
Lumbar
Angle 29˚
3/8" (1 mm)
Product Diagram
18-1/8"
(460 mm)
Pump/Control Access
(If Apron is Not Used)
20" (508 mm) W x 15" (381 mm) H
36" (914 mm)
16-5/8"
(422 mm)
1-1/2" Bath Drain
1-1/4"
(32 mm)
Tile Flange
Detail
1-1/2"
(38 mm)
Drop-in Rim
Detail
Loading...