Kohler K1125RA0 User Manual
ARCHERTM
Features
Acrylic
•
Left or right drain
•
Integral apron
•
Integral tile flange
•
Slotted overflow for maximum bathing depth
•
Low threshold height
•
Integral lumbar support
•
Armrests
•
72″ (182.9 cm) x 36″ (91.4 cm) x 19″ (48.3 cm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
•
ANSI Z124.1.2
•
CSA B45
•
ICC/ANSI A117.1
•
ASTM E162
•
ASTM E662
•
Specified Model
6’ (1.8 cm) BATH WITH INTEGRAL
APRON
K-1125-LA
ALSO K-1125-RA
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories:
0: White
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1125-LA Bath with integral apron, left drain ❑ 0 ❑ Other_____
K-1125-RA Bath with integral apron, right drain ❑ 0 ❑ Other_____
Required Accessories
K-7271 Clearflo slotted overflow brass bath drain OR ❑ CP ❑ Other_____
K-7272 Clearflo slotted overflow bath drain – PVC pipe ❑ CP ❑ Other_____
Optional Accessories
K-9529 Removable bath seat ❑ 0
Product Specification:
The acrylic bath with integral apron shall be 72″ (182.9 cm) in length, 36″ (91.4 cm) in width, and 19″ (48.3 cm) in height. Bath
shall have left or right drain. Bath shall have slotted overflow for maximum bathing depth, low threshold height, and integral
lumbar support. Bath shall have integral apron and integral tile flange. Bath shall have armrests. Bath shall be Kohler Model
K-1125-______-______.
Page 1 of 2
1071363-4-
C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
ARCHERTM
Technical Information
Fixture*:
Bathing well
Basin area bottom 51-3/8″ (130.4 cm) x 21″ (53.3 cm)
Basin area top 64-1/2″ (163.8 cm) x 30-1/2″
(77.5 cm)
Weight 80 lbs (36.3 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 40 lbs/square foot (192 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
No change in measurements if connected
with drain illustrated. (K-7272)
18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
72" (182.9 cm)
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
4-1/8"
(10.5 cm)
3/4" (1.9 cm)
Product Diagram
ARCHERTM 6’ (1.8 cm) BATH WITH INTEGRAL APRON
Page2of2
1071363-4-
C
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
36" (91.4 cm)
19"
(48.3 cm)
Loading...