Kohler K1000 Specifications
Features
•
End drain.
•
Integral lumbar support.
•
72" (1829 mm) x 37-1/2" (953 mm) x 21-1/2" (546 mm)
Material
•
Cast iron with Safeguard® finish.
Installation
•
Freestanding
Required Accessories
K-102 Antique Ball and Claw Legs
K-106 Chain and Rubber Stopper Bath Drain
K-110-4 Floor Or Wall-mount Bath Faucet
K-127 Riser Tubes
or
K-102 Antique Ball and Claw Legs
K-106 Chain and Rubber Stopper Bath Drain
K-110-9B Floor Or Wall-mount Bath Faucet
K-127 Riser Tubes
or
K-102 Antique Ball and Claw Legs
K-106 Chain and Rubber Stopper Bath Drain
K-110-3 Floor Or Wall-Mount Bath Faucet
K-127 Riser Tubes
Recommended Accessories
K-1491 Bath/Whirlpool Pillow
K-1601 Bath/Whirlpool Footstop
Birthday Bath
Freestanding Bath
K-100
Codes/Standards
ASME A112.19.1/CSA B45.2
ASTM F462
KOHLER® Enameled Cast Iron Bath
and Shower Base Lifetime Limited
Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
®
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-2-2018 01:59
1"
Birthday Bath
Freestanding Bath
K-100
®
Technical Information
All product dimensions are nominal.
FreestandingInstallation:
EndDrain location:
43" x 21" (1092 mm x 533 mm)Basin area, bottom:
67" x 31" (1702 mm x 787 mm)Basin area, top:
430 lbs (195 kg)Weight:
47 lbs/ft² (229.5 kg/m²)Minimum floor load:
11-1/8" (283 mm)Water depth:
50 gal (189.3 L)Water capacity:
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-2-2018 01:59
Loading...