Residential/Light Commercial Generator Accessories
Carburetor Heater Kits
|
|
-- --GM19462 KP1 QS |
-- --GM57969 KP4 QS |
Note: Power connectors for 240 volt kits and adapters for 8/10/12RESV/RESVL are not shown.
Applicable Models
D 6VSG
D 8/10/12RESV/RESVL
D 8.5RES
D 12RES/RESL
D 14RES/RESL/RESA/RESAL
D 17/18RES/RESL
D 20RES/RESL/RESA/RESAL
D 20RESB
Description
Carburetor heater kits are recommended for improved cold starting in locations where the temperatures falls below 0_C (32_F). Carburetor heaters prevent condensation and carburetor icing. The heater turns on when the temperature at the thermostat falls below approximately 4_C (40_F) and turns off when the temperature rises above approximately 16_C (60_F).
The carburetor heater for models 6VSG, 8.5RES, 12RES/RESL, and 14RES/RESL/RESA/RESAL mounts between the engine air cleaner and the carburetor. The carburetor heater for models 8/10/12RESV/RESVL uses an adaptor to mount on the carburetor. The carburetor heater for models 17/18RES/RESL, 20RES/RESL/RESA/RESAL, and 20RESB fits into a threaded opening on the carburetor.
Carburetor heater kits are available in 120 volt or 240 volt versions.
Note: The heater requires a continuous source of AC power. The generator set must be connected to an AC power source that is backed up by the generator set.
G6-129 (Carburetor Heater Kits) 8/14b
Loading...