Page 1
P4389005
Escale Wall Hung Bidet
Installation and User Guide
MODEL NUMBERS
19046W
Important :- Please quote the above model number(s) when ordering spares.
IMPORTANT!
Installer: This manual is the property of the customer and must
be retained with the product for maintenance and operational
purposes.
Page 2
2
1040458-K01-A
DESCRIPTION ......................................................................... 3
SAFETY : WARNINGS ............................................................. 3
DIMENSIONS ........................................................................... 4
SPECIFICATION ...................................................................... 5
Plumbing Connections ..................................................... 5
INSTALLATION ......................................................................... 5
Before You Begin ............................................................. 5
Install the Bidet ................................................................ 6
Install the Plumbing ......................................................... 8
USER MAINTENANCE ............................................................ 9
Cleaning ........................................................................... 9
10
CONTENTS
CUSTOMER SERVICE ............................................................
..............................................
Limited One-year Warranty
1
0
Page 3
DESCRIPTION
The Kohler Bidet is designed for connection to a hot and cold water supply.
This installation and user guide covers the Escale wall mounted vitreous
china bidet.
SAFETY : WARNINGS
Kohler products are precision-engineered and should give continued
superior and safe performance, provided:
1. They are installed, commissioned, operated and maintained in
accordance with the recommendations given in this Manual.
2. Periodic attention is given, as necessary, to maintain the product in
good functional order. Recommended guidelines are given in the
MAINTENANCE section.
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines for power tool
safety should be followed.
3
1040458-K01-A
Page 4
44
DIMENSIONS
367
230
65
130
600
376
230
310
140
120
90
265
60
200
155
320
400
100
O45
O35
All Dimensions in mm
1040458-K01-A
Page 5
SPECIFICATION
Plumbing Connections
Hot (H) and Cold (C) inlets must be connected to the correct inlet supplies.
INSTALLATION
Before You Begin
1. Turn off the water supply.
2.
Before installation carefully insp ect the new fixture for any signs of
damage.
5
1040458-K01-A
Page 6
Install the Bidet
1. Install the services.
2. Make sure that the hot and cold water supply pipes and the waste are
installed correctly.
Note! The hot and cold water supplies must be installed with isolating
valves.
3. Fit the taps to the bidet in accordance with the manufacturer’s
instructions.
4. Refer to dimensions and mark the centre holes on the wall for the
attachment bolts.
Caution! Make sure that you avoid hidden cables and pipes when drilling
holes in the wall.
5. Drill the fixing holes using an 8mm dia drill.
6. Insert the wall plugs into the drilled holes and fit the attachment bolts.
P3955100
Attachment Bolt
Wall
Plug
7. Screw the metal pins, supplied in the component pack, on to the
attachment bolts.
8. Insert the plastic fittings, supplied in the component pack, into the bidet
ensuring that they are fully pushed in and the grub screws line up with
theholesinthesideofthebidet.
6
1040458-K01-A
Page 7
Attachment Bolt
Chrome
Concealing
Cap
Grub Screw Access Hole
Pin
Plastic Fitting
P4389020
9. Apply silicone sealant or a sand and cement mixture to the back of the
bidet.
P3955050
Sealant / Sand
and Cement
10. Loosen the grub screws with the tool provided in the component pack
and position the bidet on the wall.
11. Tighten the grub screws and fit the chrome concealing caps.
7
1040458-K01-A
Page 8
Install the Plumbing
P3955080
Tap Connections
Waste
COLDHOT
1. Install the drain in accordance with the manufacturer’s instructions.
2. Connect the taps to the water supply.
3. Open the hot and cold water valves, and check the supply connections
for leaks.
4. Run water into the bidet, and check the drain connections for leaks.
8
1040458-K01-A
Page 9
USER MAINTENANCE
Cleaning
Caution! Risk of product damage . Many cleaners contain abrasive and
chemical substances, and should not be used for cleaning stainless steel,
enamel, plated or plastic fittings. These finishes should be cleaned using
a mild washing up detergent or soap solution, rinsed and then wiped dry
with a soft clean cloth.
Caution! Risk of product damage . Most toilet bowl cleaners are not
harmful to the vitreous china surface of the toilet bowl. Please follow the
bowl cleaner manufacturer’s instructions carefully.
Warning! Do not use in-tank cleaners. Products containing chlorine
(calcium hypochlorite) can seriously damage fittings in the tank. This
damage can cause leakage and property damage.
9
1040458-K01-A
Page 10
CUSTOMER SERVICE
Limited One-year Warranty
Kohler Co. is not
responsible for installation costs.
Implied warranties, including that of merchantability and fitness for
a particular purpose, are expressly limited in duration to the
duration of this warranty. To the extent permitted by law, Kohler Co.
disclaims all implied warranties including merchantability and
fitness for a particular purpose. Kohler Co. disclaims any liability for
special, incidental, or consequential damages.
Kohler plumbing fixtures and fittings are warranted to be free of manufacturing defects.
Kohler Co. will, at its election repair, replace, or make appropriate adjustment where Kohler Co. inspection discloses any such defects occurring
in normal usage within one year after installation.
To obtain warranty service, contact Kohler Co. either through your Dealer
or Plumbing Contractor or by writing Kohler Co., Attn: Consumer Affairs
Department, Kohler, WI 53044 U.S.A.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages,
so this limitation and exclusion may not apply to you. This warranty gives
you specific legal rights. You may also have rights which vary from state
to state.
This is our exclusive written warranty.
Kohler Co., Kohler, Wisconsin 53044
10
1040458-K01-A
Loading...