Kohler Dickinson K-6546, Dickinson K-6546-3, Dickinson K-6546-4, Dickinson K-6546-4U Series Manual

Features

•

KOHLER cast iron

•

Acid-resistant enamel finish

•

Single compartment

•

With integral apron

•

Undercounter mount (-4U)

•

Tile-in mount (-4 & -3)

•

3-hole (-3), 4-hole (-4), or 4-hole (oversized) (-4U)

•

33″ (83.8 cm) x 22-1/8″ (56.2 cm)

Codes/Standards Applicable

Specified model meets or exceeds the following:

•

ASME A112.19.1M

•

IAPMO/UPC

APRON FRONT KITCHEN SINK

K-6546

Colors/Finishes

•

0: White

•

Other: Refer to Price Book for additional colors/finishes

Accessories:

•

CP: Polished Chrome

•

NA: None applicable

•

Other: Refer to Price Book for additional colors/finishes

Specified Model

Model Description Colors/Finishes

K-6546-3 3-hole sink (tile-in) ❑ 0 ❑ Other_____
K-6546-4 4-hole sink (tile-in) ❑ 0 ❑ Other_____
K-6546-4U 4-hole sink (undercounter) ❑ 0 ❑ Other_____

Recommended Accessories

K-9000 P-Trap ❑ CP

Optional Accessories

K-5984 Hardwood cutting board ❑ NA

K-8801 Duostrainer

®

sink strainer ❑ CP ❑ Other_____

Product Specification

The kitchen sink shall be made of cast iron with acid-resistant enamel finish. Sink shall be single compartment. Sink shall have
integral apron. Sink shall be undercounter (-4U) or tile-in (-4 or -3). Sink shall be 3-hole (-3), 4-hole (-4), or 4-hole (oversized)
(-4U). Sink shall be 33″ (83.8 cm) in length and 22-1/8″ (56.2 cm) in width. Sink shall be Kohler Model
K-6546-_______-_______.

DICKINSONTM

Page 1 of 2
111205-4-

CB

USA: 1-800-4-KOHLER

Canada: 1-800-964-5590

kohler.com

Technical Information

Fixture*:
Sink 30″ (76.2 cm) x 15″ (38.1 cm)
Water depth 8″ (20.3 cm)
Drain hole 3-5/8″ (9.2 cm) D.
Faucet holes,

undercounter

2-3/8″ (6 cm) D.

Faucet holes, tile-in 1-3/8″ (3.5 cm) D.
* Approximate measurements for comparison only.

Installation Notes

Install this product according to the installation guide.

Due to the special nature of this installation, Kohler Co.
recommends that an experienced cabinet maker use the
actual sink to build the new cabinet or modify an existing
cabinet.

For undercounter installations, allow a 3/4″ (1.9 cm) reveal to
support the K-5984 cutting board.

4" (10.2 cm)

2" (5.1 cm)

2-5/8" (6.7 cm)

4" (10.2 cm)

4" (10.2 cm)

K-6546-4U

K-6546-4

K-6546-3

1-1/2" OD

2"
(5.1 cm)

10"
(25.4 cm)

4-1/4"
(10.8 cm)

4-1/4"
(10.8 cm)

4-1/4"
(10.8 cm)

3/8"
(1 cm)

5/8"
(1.6 cm)

7/8"
(2.2 cm) R.

1-1/4"
(3.2 cm) R.

1"
(2.5 cm) R.

8-5/8"
(21.9 cm)

8-3/4"
(22.2 cm)

1"
(2.5 cm) R.

22-1/8"
(56.2 cm)

2"
(5.1 cm)

1-3/4"
(4.4 cm)

14"
(35.6 cm)

16-1/2" (41.9 cm)

33" (83.8 cm)

Product Diagram

DICKINSONTM

DICKINSONTM APRON FRONT KITCHEN SINK
Page2of2

111205-4-

CB