Kohler 3.5EFOZ, 4EOZ User Manual
Service Parts
Marine Generator Sets
Models:
3.5EFOZ/4EOZ
TP-6138 5/02
Table of Contents
Introduction 1.................................................................
Numbering System Significance 1...............................................
Illustrations 1..................................................................
How to Find Part Numbers 1....................................................
Hardware References 1........................................................
Specification Number Index 2...................................................
Group 1: Crankcase 3.........................................................
Group 2: Crankshaft and Piston 4...............................................
Group 3: Cylinder Head 6......................................................
Group 4: Gear Timing and Cover 8..............................................
Group 5: Speed Control Shaft 10................................................
Group 6: Fuel Lines 1 1.........................................................
Group 7: Flywheel 12..........................................................
Group 8: Starter Motor 13......................................................
Group 9: Exhaust System 14...................................................
Group 10: Oil Cooler and Lines 15...............................................
Group 11: Seawater Pump 16...................................................
Group 12: Oil Draining Lines 17.................................................
Group 13: Fuel Filter and Pump 18..............................................
Group 14: Air Intake Filter 19...................................................
Group 15: Gasket Set 20.......................................................
Group 16: Base and Mounting 22...............................................
Group 17: Sound Shield 24.....................................................
Group 18: Generator and Mounting 26...........................................
Group 19: Controller and Mounting 28...........................................
Group 20: Control Panel 30.....................................................
Group 21: Siphon Break and Lines 31............................................
Group 22: Literature 32........................................................
Paint and Miscellaneous Parts 32................................................
Accessories 32................................................................
Appendix A Abbreviations A-1..................................................
Appendix B Common Hardware Application Guidelines A-3.........................
Appendix C General Torque Specifications A-4....................................
Appendix D Common Hardware Identification A-5.................................
Appendix E Common Hardware List A-6.........................................
Introduction
This manual lists service replacement parts for 4 kW
generator sets.
At the time of print this manual applied to the generator
set specification (spec) numbers listed in the
Specification Number Index. On occasion this manual
may apply to specs not listed in the Specification
Number Index.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
This manual includes the following main sections:
Table of Contents. Lists the sections of the manual.
Introduction (and other information sections).
Contains introductory material about part numbers,
illustrations, and hardware.
Specification Number Index. Lists the generator set
specs and groups.
Group Parts Lists. List the part numbers of parts in the
groups.
Kit Sections. List modules and accessories and their
parts.
Appendices. Include Abbreviations, Common
Hardware Application Guidelines, General Torque
Specifications, Common Hardware Identification, and
Common Hardware List.
x:in:004:002
Numbering System Significance
This manual uses the following numbering systems:
Specification Number. The product identification
number located on the generator set nameplate.
Specification numbers break down into groups.
Group Number. A unique number representing a parts
group needed to assemble a generator set function. For
example, Group 101 is the Air Intake group.
Variation or Module Number. A group might have
several variations. Each variation performs the same
function with different parts lists. For example, a 50 Hz
generator alternator and a 60 Hz generator alternator
both perform the same function; however, with different
parts. Each difference requires a group variation or
module number.
Part Number. The part number identifies an individual
assembly, subassembly, component, or accessory kit.
x:in:004:003:a
Illustrations
Illustrations (or exploded-view drawings) best
representing the widest range of variations accompany
most groups in this manual. Illustrations do not depict all
details and may not show all parts. Do not use
illustrations for assembly or disassembly.
x:in:004:004:a
How to Find Part Numbers
Use the following steps to locate a service replacement
part.
1. Locate the generator set nameplate to identify the
generator set spec number.
2. Locate a second generator set nameplate listing
accessories to identify installed modules.On
some models the accessory nameplate is mounted
inside the generator junction box.
3. Turn to the Specification Number Index.The
first column lists the generator set spec numbers.
The headings identify the groups of parts that make
up the generator set.
4. Identify the group most likely to include the
service part number.
5. Find the group variation number at the
intersection of the spec number row and the group
column. Note the variation number.
6. Page forward to locate the group identified in
step 4 or find the appropriate page in the Table of
Contents.
7. Find the part on the illustration and note the item
number of the part or find the part description in
the parts list.
8. Select the part number that corresponds to
your group variation. The first column lists the
illustration item number. Find the variation
identified in the Specification Number Index or the
module number found on the generator set
nameplate in the appropriate column on the right
side of the parts list table. Find the quantity used at
the intersection of the item number row and the
variation column. A blank space at the intersection
means the variation/module does not use that part
number.
x:in:004:005
Hardware References
Many common hardware items do not appear in parts
manuals or will appear as common hardware entries. A
common hardware entry lists the size of the hardware.
For example, an item that appears as “Hardware,
3/8-16” in the text means that the piece is 3/8-16 size.
Obtain common hardware locally or, if contacting the
factory, use the Common Hardware List in the appendix
to identify the common hardware part number and
specifications. See Common Hardware Application
Guidelines in the appendix for mating hardware
instructions.
Some hardware items require a specific size or some
other characteristic. In that case, use the part number
listedinthetext.
When replacing hardware, do not substitute inferior
grade hardware. Replacement hardware grade should
be equal to or better than the grade of the
manufacturer’s original hardware. Use the Common
Hardware List in the appendix to identify the common
hardware hardness.
x:in:004:006
TP-6138 5/02
1
Specification Number Index
Group Title
Group No. 1 2 3 4 5 6 7 8 9 10 11 12 13
Spec. No.
VARIATION NUMBER
3.5EFOZ
GM20642-SA1 1 2 1 1 1 1 1 1 1 1 1 1 1
4EOZ
GM20641-SA1 1 1 1 1 1 1 1 1 1 1 1 1 1
Group Title
GroupNo. 141516171819202122
Spec No.
VARIATION NUMBER
3.5EFOZ
GM20642-SA1 1 1 1 1 2 2 1 1 1
4EOZ
GM20641-SA1 1 1 1 1 1 1 1 1 1
2
TP-6138 5/02
Group 1: Crankcase
Quantity
Part Variation No.
Item Number Description 1
1 GM24007 Crankcase Assembly 1
2 GM23884 Stud, Cylinder Block 2
3 GM23885 Stud, Cylinder Block 2
4 GM23886 Stud, Crankcase 4
5 GM23870 Switch, Oil Pressure 1
7 GM23934 Gasket, Crankcase 1
10 GM23955 O-ring, 99 x 3 mm 1
11 GM23927 Housing, Main Bearing 1
12 GM23965 Retainer, Ring 1
13 GM23973 Seal, Oil, 60 x 80 x 8 mm 1
14 # Nut, Hex Head, M8 4
15 # Washer, Tooth, 18 mm 4
16 GM23925 Pump Assembly, Oil 1
17 GM23937 Gasket, Oil Pump 1
18 # Washer, Split, 6 mm ID 3
19 # Screw, Hex Head Cap, M6 x 20 1
20 # Screw, Hex Head Cap, M6 x 30 2
# Common hardware; procure locally.
6138_1
TP-6138 5/02
3
Group 2: Crankshaft and Piston
6138_2
4
TP-6138 5/02
Group 2: Crankshaft and Piston
Quantity
Part Variation No.
Item Number Description 1 2
1 GM24009 Crankshaft Assembly 1 1
3 GM23954 O-ring, 32 x 2 mm 1 1
4 GM23893 Ring, Angle 1 1
5 GM23946 Washer, Spring, 52 x 36 x 1.2 mm 2 2
6 GM23891 Nut, Flywheel 1 1
7 GM23879 Gear, Timing Crankshaft 1 1
8 GM23942 Bushing, Main (Standard) 1 1
8 GM23943 Bushing, Main (0.25 mm Undersize) 1 1
8 GM23944 Bushing, Main (0.50 mm Undersize) 1 1
9 GM24000 Bearing (Standard) 1 1
9 GM24001 Bearing (0.25 mm Undersize) 1 1
9 GM24002 Bearing (0.50 mm Undersize) 1 1
10 GM23975 Key,6x4x12mm 2 2
11 GM23945 Bearing, Main 1 1
12 GM23906 Governor Assembly (RPM=3000E) 1
12 GM23907 Governor Assembly (RPM=3000) 1
12 GM23908 Governor Assembly (RPM=3600E) 1
13 GM23974 Pin, 4 x 27.8 mm 1 1
15 GM24010 Piston Assembly 1 1
16 GM24006 Set, Piston Ring 1 1
17 GM23983 Clip, Piston Pin 2 2
18 GM23874 Pin, Piston 1 1
19 GM23926 Rod Assembly, Connecting 1 1
20 GM23883 Bolt, Connecting Rod 2 2
21 GM23890 Nut, Collar 2 2
22 GM23882 Bushing, Connecting Rod 1 1
24 # Plug, 22 mm 4 4
25 GM23997 Connector, Water Tube 2 2
26 GM23953 O-ring, 10 x 2.2 mm 2 2
27 GM24011 Cylinder Assembly 1 1
# Common hardware; procure locally.
TP-6138 5/02
5
Group 3: Cylinder Head
6138_3
6
TP-6138 5/02
Group 3: Cylinder Head
Quantity
Part Variation No.
Item Number Description 1
1 GM24012 Head Assembly, Cylinder 1
2 GM23921 Valve, Breather 1
3 GM23941 Gasket, Cylinder Head 1
4 GM23878 Valve, Intake 1
5 GM23990 Washer 2
6 GM23876 Guide, Valve 2
7 GM23964 Guide, Oil Seal 2
8 GM23947 Spring, Valve 1
9 GM23895 Retainer, Valve Spring 2
10 GM24005 Valve, Cotter 2
11 GM23877 Valve, Exhaust 1
12 GM23894 Ring 1
14 GM23911 Rotocap, Valve 1
15 GM23948 Spring, Valve 1
16 GM23951 Spring, Retainer 1
17 GM23967 Stud, M5 x 10 2
18 # Washer, 5 mm ID 2
19 # Nut, Hex Head, M5 2
20 GM23872 Shaft, Rocker Arm 1
21 GM23919 Arm Assembly, Rocker 1
22 GM23918 Arm Assembly, Rocker 1
23 GM23889 Screw, Adjusting 2
24 # Nut, Hex Head, M7
25 GM23902 Injector, Fuel 1
26 GM23962 Washer 1
27 GM23903 Nozzle, Fuel Injector 1
28 GM23904 Seat, Spring 1
29 GM23905 Spring, Nozzle 1
30 GM23991 Flange, Injector 1
31 GM23972 Stud, M6 x 50 1
32 GM23971 Stud, M6 x 45 1
33 # Washer, Split, 6 mm ID 2
34 # Nut, Hex Head, M6 2
35 GM23987 Tube, Push Rod 1
36 GM23956 O-ring, 24 x 3.5 mm 1
37 # Plug, 22 mm 2
38 # Plug, 18 mm 1
39 GM23932 Gasket, Rocker Cover 1
40 GM23920 Cover, Rocker 1
41 # Washer, 5 mm ID 2
42 GM23989 Bracket, Lifting 1
44 GM23890 Nut, Collar 6
45 # Plug, 18 mm 1
47 GM23914 Switch, Temperature Alarm 1
48 GM23981 Washer, Copper, 14 mm ID 1
49 # Screw, Hex Head Cap, M8 x 20 2
50 # Washer, Split, 8 mm ID 2
52 GM23931 Gasket 2
53 GM23912 Thermostat 1
54 GM24140 Cover, Thermostat 1
# Common hardware; procure locally.
TP-6138 5/02
7
Group 4: Gear Timing and Cover
6138_4
8
TP-6138 5/02
Group 4: Gear Timing and Cover
Quantity
Part Variation No.
Item Number Description 1
1 GM23923 Cover, Timing Gear 1
3 GM23933 Gasket, Cover 1
4 GM23976 Pin, 10 x 16 mm 2
8# Washer, Split, 5 mm ID 1
9 GM23887 Screw, Hex Head 1
10 GM23958 Gasket 1
11 GM24003 Cap, Oil Filler 1
12 GM23929 Dipstick 1
13 GM23968 Stud, M8 x 20 2
14 GM24013 Screen Assembly, Oil Filter 1
17 GM23938 Gasket, Oil Filter 1
18 GM23977 Washer, Copper, 6 mm ID 2
19 # Screw, Hex Head, M6 x 20 2
20 # Screw, Hex Head Cap, M8 x 70 2
21 GM24004 Handle 1
24 GM24008 Primer Assembly 1
25 # Screw, Hex Head Cap, M8 x 80 3
26 GM23993 Shim, Adjusting, 0.2 mm 1
26 GM23994 Shim, Adjusting, 0.5 mm 1
26 GM23995 Shim, Adjusting, 0.4 mm 1
26 GM23996 Shim, Adjusting, 1.0 mm 1
27 GM23939 Gasket 1
28 GM23901 Roller, T appet 1
29 GM23896 Pump, Fuel Injection 1
30 # Washer, Split, 8 mm ID 1
31 # Nut, Hex Head, M8 2
32 GM23897 Washer 1
33 GM23900 Valv e 1
34 GM23898 Spring, Valve 1
35 GM23899 Plunger, Fuel 1
36 GM23875 Push Rod 2
37 GM23957 O-ring, 32 x 3 mm 1
38 # Screw, Hex Head Cap, M5 x 30 2
39 GM23922 Release, Compression 1
40 GM23936 Gasket, Plate, 0.3 mm 1
40 GM23940 Gasket, Plate, 0.4 mm 1
42 GM23966 Bearing, Grooved Ball 1
43 GM23960 O-ring, 32.7 x 1.3 mm 1
44 GM23873 Bolt 1
45 GM23924 Camshaft 1
46 GM23880 Gear 1
47 GM23975 Key,6x4x12mm 1
53 GM23917 Cover 1
55 GM23961 O-ring, 57 x 2.5 mm 1
56 # Washer, Split, 6 mm ID 2
57 # Screw, Hex Head, M6 x 16 2
58 GM23930 Gasket, Plate 1
59 GM23985 Cover 1
60 GM23979 Washer, Copper, 5 mm ID 2
61 # Screw, Hex Head, M5 x 16 2
62 GM24511 Ring, snap 1
# Common hardware; procure locally.
TP-6138 5/02
9
Group 5: Speed Control Shaft
Quantity
Part Va riation N o.
Item Number Description 1
1 GM23949 Spring, Torsion Return 1
2 GM23916 Arm, Governor 1
3 GM23888 Screw, Adjustment 1
4 GM23992 Tab, Locking 1
5# Nut, Hex Head, M6 1
6 GM23952 Retainer 1
7 GM23871 Shaft, Speed Control 1
8 GM23953 O-ring, 10 x 2.2 mm 1
9 GM23950 Spring, Torsion Return 1
10 GM23986 Plate, Control 1
11 GM23984 Lever 1
12 # Washer, Tooth, 8 mm 1
13 # Nut, Hex Head, M8 1
14 GM23913 Bolt 1
# Common hardware; procure locally.
6138_5
10
TP-6138 5/02
Group 6: Fuel Lines
X-6288-1
TP-6138 5/02
6138_6
Quantity
Part Variation No.
Item Number Description 1
1 GM23999 Line, Return Fuel 1
2 GM23982 Bolt, Banjo Union 2
3 GM23959 Washer, Copper, 8 mm ID 1
4 GM23978 Washer, Copper, 8 mm ID 3
5 GM23892 Connector 1
6 GM23980 Washer, Copper, 12 mm ID 4
7 GM23988 Clamp, Fuel Line 1
8 GM23998 Pipe, Fuel Injector 1
9 GM24072 Solenoid, Shutoff 1
10 GM24099 Bolt, Banjo Union 1
11 # Eye, Fuel Supply Line 1
# Common hardware; procure locally.
11
Group 7: Flywheel
Quantity
Part Va riation N o.
Item Number Description 1
1 GM23928 Flywheel 1
2 GM23881 Gear 1
# Common hardware; procure locally.
6138_7
12
TP-6138 5/02
Loading...