Kogan Kaslrktftna User Manual

SOLAR POWERED FOUNTAIN KIT

KASLRKTFTNA

QUICK START GUIDE

Packaging Contents

Part Description Quantity

A Solar Panel 1

B Extension Tube 2

C Joint 1

D Intubation 1

E Nozzle 1

F Nozzle 1

G Nozzle 1

H Nozzle 1

I Nozzle Base 1

J Connection Head 1

K Outlet 1

L Pump 1

Specifications

Solar Battery Power: 9V/2W Solar Panel Size: 145 x 195 x 50mm

Pump Power: 9V, 1.7W Max Flow of Pump: 210 L/h

Max Lift of Pump: 120cm Max Water Height: 40 ~ 70cm

Installation

• Put the pump entirely under the water, with the nozzle over the top of the surface. Ensure the pump is fixed
firmly to the bottom of the fountain to avoid vibration.

• Plug the jack of the pump into the jack of the solar panel output.

• Put the solar panel in a location where it can face directly into the sun.

Caution

• Be sure that there is enough water in the fountain, especially on sunny days, to keep the pump entirely covered
by water.

• Change the water frequently to keep the water fresh and avoid dirt impeding the pump functions.

• Be careful to protect the solar panel from damage.

• Keep the surface of the solar panel clean.

Assembly Instructions

Operation

• Put the solar panel in a location where it will receive the maximum amount of sunlight. In Australia, point the
panel in a northern direction to ensure the maximum amount of sunlight is captured.

• When the sun is weak, the water pump will not operate continuously, but will instead launch repeatedly as power
builds up.

• The pump itself must be immersed in water. Do not operate the pump with part of the pump unit itself outside of
the water.

• Please keep water clean. Regularly clean the pump to prevent foreign bodies being sucked up into the pump

mechanism.