Kogan KAMN34RXUSA User Manual

34" WQHD CURVED 21:9 ULTRAWIDE
144Hz FREESYNC HDR GAMING MONITOR

(3440 x 1440)

KAMN34RXUSA

The terms HDMI and HDMI High-Definition Multimedia Interface

countries.

SAFETY & WARNINGS

• Read all instructions before using the appliance and retain for reference.

• Unplug the monitor before cleaning it.

• Use a clean, slightly dampened cloth to wipe the main monitor body.

• To clean the screen, turn it off unplug it and wait for it to cool completely, then

wipe it with a dry micro-fibre cloth.

• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.

• This monitor is designed with ventilation holes on the back of the casing. Do not

cover or block them.

• Do not insert any object or spray any liquid into the vents.

• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat,

as well as in rooms lacking adequate ventilation.

• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.

• Unplug the monitor if it is not going to be used for an extended period.

• Do not place heavy objects on the monitor, its power cord or any connected cable.

• Do not open the back panel of the monitor, as it contains a high-voltage current

even when not plugged in.

and the HDMI Logos are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other

Monitor

Stand connector

Stand base screw

(M6 x 16mm, x1)

DisplayPort cable

Power cable

User guide

IN THE BOX

Stand base

VESA screws (x4)

OVERVIEW

Monitor Controls

The control stick functions as directional input and power/OK when pressed.

1. Press and hold for 6 seconds to turn on and off.

2. With the display turned on, press to wake up the main menu for one second.

3. In the menu, press up and down to highlight an item and OK to confirm.
Press OK again to save and return to the upper menu.

Monitor Ports

2

AUDIO OUT (3.5mm)

3

DP 1.4

4

DP 1.4

5

HDMI 2.0

6

USB

Note: The USB port is for firmware update installation only and does not provide the monitor
or a connected device with USB connectivity.