Kogan KAM45BWCDZA User Manual

USER GUIDE
45 BOTTLE DUAL ZONE WINE FRIDGE
(KAM45BWCDZA)
CONTENTS
Product overview ...................................05
Cleaning & maintenance ..............15 - 16
Troubleshooting .......................................17
Specifications .......................................... 18
THIS USER GUIDE COVERS THE FOLLOWING MODELS
Kogan 45 Bottle Dual Zone Wine Fridge - Stainless Steel (KAM45BWCDZA)
2
SAFETY AND WARNINGS
Thank you for buying this Kogan product. Please read all safety instructions before using your fridge or freezer.
WARNING: RISK OF FIRE / FLAMMABLE MATERIALS
• This appliance is only intended for use within a domestic environment only.
• If the supply cord is damaged, it must be replaced by Kogan.com or an authorised service agent on Kogan.com’s behalf.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• The appliance must be unplugged aer use and before carrying out user maintenance on the appliance.
• WARNING: Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
• WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not use extension cords or ungrounded, (two prong( adapters.
Children:
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
Unpacking:
• During transportation, protective packaging was used to protect the appliance against any damage. Aer unpacking, please dispose of all elements of packaging in a way that will not cause damage to the environment.
CAUTION: During unpacking, the packaging materials (polythene bags, polystyrene pieces, etc.) should be kept out of reach of children.
Risk of Fire:
• If the refrigerant circuit should become damaged. Avoid open flames and sources of ignition. Disconnect the appliance from the mains power. Thoroughly ventilate the room in which the appliance is situated for several minutes.
3
SAFETY AND WARNINGS (cont’d)
Disposing:
• Old appliances should not simply be disposed of with normal household waste, but should be delivered to a collection and recycling centre for electric and electronic equipment. A symbol shown on the product, the instruction manual or the packaging shows that it is suitable for recycling.
• Materials used inside the appliance are recyclable and are labelled with information concerning this. By recycling materials or other parts from used devices you are making a significant contribution to the protection of our environment.
• Information on appropriate disposal centres for used devices can be provided by your local authority
4
PRODUCT OVERVIEW
1
2
3
1 Temperature control panel
2 Shelves
3 Glass door
5
INSTALLATION
SELECTING A SUITABLE LOCATION
Before using the unit, remove all packaging materials including bottom cushions, foam pads, and tapes inside the cooler. Remove the protective film on the door and the cooler body.
When selecting a position for your unit, ensure the floor is flat and firm, and the room is well ventilated. Avoid placing your unit near a heat source (ie, oven, radiator, or hot water system). Avoid direct sunlight as it may increase the electrical consumption. Extreme cold temperatures may also cause the unit to not perform correctly. This unit is not designed for use in a garage or outdoors. Do not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is allowed to the left, right and rear of the unit, and 30cm at the top. This will allow cold air to circulate around the unit and improve the efficiency of the cooling process.
1a. Door space requirements
The unit’s door must be able to open fully as pictured (1a).
1b. Levelling the unit
When selecting a position for your unit, ensure the floor is flat and firm. Ensure that the feet all touch the ground before use.
6
Figure 1a
Figure 1b
Loading...
+ 14 hidden pages