
Software Installation
Step One
Insert installation CD and run the FORTIS app.
You may be asked to grant permission for the
installation program to make changes to your
computer. Please press OK to allow changes.
Step Two
The Fortis Trackfit Setup window will appear.
Please press NEXT once you have read and
followed the information.
Step Three
Once the program is installed correctly, a
window will pop up to inform you of this.
Please press FINISH to close the installer.
Your computer is now ready to receive your
TrackFit Information.
Personal Data Setting/Data Sync
• Connect the Activity Tracker to your PC with the
USB cable.
• Press the “Setting” on the APP main page, then
you can set your personal data and sync activity
data. Press “Read Data” to connect the activity
tracker to the APP. A progress bar will be seen.
• Press “Update Setting” to upload or synch the
Activity Tracker data.
Pedometer Setting
Set ID Code : Set the ID Code, then press “Set
ID Code”, then the ID will be saved.
Set Name : Set the name as you want, then
press “Set Name” and it will be saved.
Set Device Time: Press “Set Device Time” and
the device time will sync with the PC time.
The time will also be synced when you press
“Read Data”.
Basic Information
• Enter your personal information such as your
height, weight, stride length, age, gender and
daily goal, then press “Update Setting” to save
the information.

Saving Data
After reading data, press “Save As” to save your personal activity data to your storage target
folder. Next time, you can pick up the data file from the storage folder, if you want to sync or
view the activity data.
You can enter new data if necessary.
Tips: In order to make the measurements more accurate, please submit your complete personal
setting data. When setting a new ID in the Activity Tracker, the old ID data will be cleared.
You should upload your data at least once every 15 days due to the limited memory of the
activity tracker.
Usage Instructions
Press the button for 10 seconds to activate the activity tracker, or the device will be in idle
mode.
Time / Date / Battery Walking Steps Calories Burned
Distance in KM Activity Time in Hours Daily Target as a %
Sleep Mode
1. Press the button for 5 seconds until the above screen with a flashing bed is displayed.
Press the button a second time to confirm that you wish to enter sleep mode, and a
crescent moon emblem will appear. The unit will now measure your sleep.
2. To exit sleep mode, press and hold the button for 5 seconds until the above screen with
the flashing bed is displayed. Press the button a second time to confirm that you wish to
exit sleep mode and start measuring activities.
How to Wear the Tracker

Battery Charging
Connect the Activity Tracker to PC with USB cable. The device needs to be charged for about
60 minutes, then the power will last 5 – 7 days.
Device standby: When the device is not used for a long time, the device will be in low power
consumption standby mode.
Product Specifications
Model #: FSACTTRBLKA
Body size: 46 x 23 x 10mm
Wristband: 235 x 25mm
Belt clip: 60.5(L) x 25(W)mm
Weight: 9g
Battery: Rechargeable Lithium Polymer Battery
Display: 0.91” OLED
Data Memory: 15 Days
If you have any further questions regarding the use of this product, please contact the
Kogan.com customer support team.