KODAK PULSE Digital Frame
connected media device
Extended user guide
www.kodak.com
For help, go to www.kodak.com/go/pulseframesupport
Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2011
All screen images are simulated.
Kodak and Pulse are trademarks of Eastman Kodak Company.
P/N 4H7382_en
Product features
1 72 653 4
10
11
8
9
10
Touch screen
Touch the screen anywhere to display the icons, then touch an icon to:
1 Play—start or resume a slide show.
2 Collage—start a revolving five-picture slide show.
3 Information —view picture information.
4 Delete—remove pictures from the digital frame.
5 Rotate—rotate the displayed picture 90° clockwise.
6 Transition time—change the display duration and transition type.
7 Quick comment—send a comment to the originator when pictures arrive from
FACEBOOK or email.
8 Copy (not shown)—copy pictures from a memory card or USB device to your digital
frame internal memory (appears only when a memory card or USB device is inserted).
9 Picture sources—view pictures in internal memory by friends or playlists; or view
pictures on an inserted memory card or USB device.
10 Previous/Next—view the previous/next picture.
11 Health Check—check/fix your network connection (only appears if there is a network
connection problem).
www.kodak.com/go/pulseframesupport
i
Product features
1a
1b
2
3
4
5
6
7
Back panel buttons and connectors
1a Activity sensor (light) Activity sensors are a new feature and are not found on earlier
1b Activity sensor (sound)
2 USB connector
3 Memory card slots
4 Power Press to manually turn the digital frame on or off. Se e also,
5 Health check Press to open the Health check screen. See
6 Power connection,
DC-in
7 Data plate Contains model name and serial number (on bottom of foot).
PULSE Digital Frame models. See Automatic on and off, page 3.
See
Viewing pictures from a memory card or USB device, page 21.
Automatic on and off, page 3.
Health Check, page 25.
Attaching the power cable, page 2.
See
ii www.kodak.com/go/pulseframesupport
Product features
Your kodakpulse.com account
On your computer, create your free www.kodakpulse.com account and activate your
digital frame (see page 7). Then sign in to your account to:
■ Add pictures to your digital frame from
your computer.
■ Add pictures from your and your friends’
KODAK Gallery and FACEBOOK Social
Network accounts.
NOTE: These online services may not be
available or supported in all regions or
languages.
■ Create an email address for your digital
frame, and invite guests to email pictures
directly to your digital frame.
■ Organize your pictures—create playlists.
■ Change display settings, including time
■ Add a new KODAK PULSE Digital Frame to
■ Learn more about your digital frame and
When you see the laptop icon in this user guide, go to your computer and
sign on to your kodakpulse.com account to use expanded PULSE Digital
Frame features and settings.
www.kodak.com/go/pulseframesupport
zone, energy saver on/off times, slide
show transitions, language, and account
information.
your account.
using your account—click Help.
iii
Table of contents 1
1 Getting started ......................................................................................1
KODAK PULSE Digital Frame with activity sensors..........................................1
KODAK PULSE Digital Frame .........................................................................1
How do I know which model I have?.............................................................1
Attaching the power cable ............................................................................2
Automatic on and off ....................................................................................3
Setting your language ...................................................................................4
Connecting to your wireless network.............................................................5
Activating your frame—www.kodakpulse.com..............................................7
Adding pictures to your digital frame.............................................................8
Secure, WPS, non-broadcasting, and other special network conditions...........9
Is this PULSE Digital Frame a gift? ...............................................................12
2 Viewing pictures ..................................................................................14
Viewing pictures on your digital frame.........................................................14
Searching for and viewing pictures ..............................................................15
Receiving pictures wirelessly........................................................................17
Sending a quick comment ...........................................................................17
Scrolling through your pictures ....................................................................18
Rotating pictures.........................................................................................18
Displaying picture information.....................................................................19
Viewing pictures as a collage.......................................................................19
Changing transition type and time...............................................................20
Viewing pictures from a memory card or USB device ....................................21
Copying pictures from a memory card or USB device....................................22
Deleting pictures.........................................................................................23
3 Health Check .......................................................................................25
Opening the Health check screen.................................................................25
Checking wireless network status................................................................26
About—Checking PULSE Digital Frame information.....................................26
iv www.kodak.com/go/pulseframesupport
Table of contents
Network—Setting up a new or advanced network.......................................27
Help—Getting more information.................................................................27
Updating digital frame firmware..................................................................28
4 Troubleshooting and support ..............................................................29
Getting help on your digital frame...............................................................29
Troubleshooting problems with your digital frame........................................30
Learning more about your digital frame .......................................................32
Learning more about activity sensors...........................................................32
5 Appendix .............................................................................................34
PULSE Digital Frame specifications ..............................................................34
Important safety instructions .......................................................................35
Cleaning your digital frame .........................................................................36
Additional care and maintenance ................................................................36
Limited warranty .........................................................................................37
Regulatory compliance and advisory............................................................39
www.kodak.com/go/pulseframesupport
v
The KODAK PULSE Digital Frame offers these exciting new features:
Activity sensor
(light)
Activity
sensor
(sound)
■ Quick Comment button—let friends know how much you appreciate their
■ Playlists—drag-and-drop pictures into custom albums at kodakpulse.com, then
■ Rotate pictures—rotate pictures on the screen with just a touch (see page 18).
KODAK PULSE Digital Frame with activity sensors
The PULSE Digital Frame with activity sensors includes sensors that turn on the frame
when you're nearby, and turn it off to conserve power when you're not (see page 3).
KODAK PULSE Digital Frame
If you have an original KODAK PULSE Digital Frame, you can update the firmware to
add the same new features as the PULSE Digital Frame. See Updating digital frame
firmware, page 28. NOTE: Activity sensors are not available with the firmware update.
How do I know which model I have?
1 Getting started
pictures—directly from the digital frame (see page 17).
play them with just a touch of the digital frame (see page 15).
Look at the back panel of your digital frame:
If your frame has light and sound activity
sensors—You have the new PULSE Digital Frame
with activity sensors and all new features.
If your frame does not have light and sound
activity sensors—You have the original PULSE
Digital Frame. Update the firmware to add new
features (no activity sensors).
1 www.kodak.com/go/pulseframesupport
Attaching the power cable
CAUTION:
Your power cable may look
different from the one pictured.
If more than one plug is
included, use the plug for
your type of power outlet.
Getting started
NOTE: The
digital frame
automatically turns on when you plug it in for the first time.
Do not use this power cable with other devices, including digital
cameras.
www.kodak.com/go/pulseframesupport
2
Getting started
Automatic on and off
The PULSE Digital Frame turns on when you plug it in for the first time; then,
according to the factory defaults, saves energy by turning on and off automatically as
described below.
Energy saver auto on/off
The PULSE Digital Frame turns itself on in the morning and off at night (usually on at
8:00 AM and off at 10:00 PM).
NOTE: You can press the power button at any time to turn the digital frame on or off.
Activity sensors
The new PULSE Digital Frame has activity sensors, an added energy-saving feature.
■ The activity sensors turn on the digital frame when light and sound are detected in
the room. When lower levels of light or sound are detected, the sensors turn off
the digital frame.
■ For more details about the activity sensors, see page 32.
How do I know which model I have?
Check the back panel of your frame to see if it has activity sensors. See page 1.
Changing the auto on/off and activity sensor settings
To change the default automatic on/off times or to disable the activity sensors:
1 On your computer, create your free online account and activate your digital frame
(see page 7). Then sign in to your account at www.kodakpulse.com.
2 Click the Frame settings tab and select your preferred Energy saving settings.
3 www.kodak.com/go/pulseframesupport
Getting started
Setting your language
The language screen appears the first time you turn on your digital frame.
NOTE: If someone else set up your digital frame, your language may already be selected, and the language
screen may not appear.
■ Touch your language.
The screens appear in the language you touch.
Wrong language?
■ Touch Back .
■ If the Back button is unavailable, see
Troubleshooting problems with your digital frame,
page 30.
■ If you have already created your free online account
and activated your digital frame (see page 7), you
can change the language through the KODAK
PULSE Web site. Sign in to your account at
www.kodakpulse.com, then click the Frame
Settings tab.
www.kodak.com/go/pulseframesupport
4
Getting started
Connecting to your wireless network
When you connect your digital frame to the Internet over your wireless network, you
can perform a host of activities including adding pictures from your computer,
receiving pictures from friends, changing display settings, and more.
Before you start
Before you start connecting your digital frame to your wireless network, make sure
you:
■ Have Internet access and a wireless network set up in your home
■ Know your network name (also called an SSID)
■ Know your wireless network’s security code (password), if you have security
enabled on your wireless network
NOTE: If you are not sure you have a wireless network or don’t know your security password, ask the
person who set up your computer.
Connecting with the network setup wizard
NOTE: If someone else set up your digital frame for you (for instance, if it was a gift), your screen may show
fewer steps.
After you select your language, the network setup wizard appears.
1 Touch Start .
Available wireless networks are listed.
If your wireless network is not shown, see page 10.
NOTE: Touch
5 www.kodak.com/go/pulseframesupport
Back
to return to the language screen.
To bypass the wireless setup and go directly to viewing
Exit
pictures, touch
connection later, see page 11.
. You can set up your wireless
Getting started
2 Touch your network.
The digital frame scans for your wireless network. A
message appears when it has successfully connected.
■ If your digital frame is successfully connected, continue with Activating
your frame—www.kodakpulse.com, page 7 to finish your setup.
■ If your digital frame was already set up (for instance, if it was a gift), touch
OK on the confirmation screen to verify your information. Congratulations, your
setup is complete!
If the information shown is incorrect, see Receiving the PULSE Digital Frame,
page 13.
■ If your network is not yet connected, or you’d like to connect later, continue
with the condition that applies to your network:
Network is secure, page 9
Wi-Fi Protected Setup (WPS), page 9
Network is not shown after network scan, page 10
Connect to your wireless network later, page 11
Network—Setting up a new or advanced network, page 27
Wireless network connection problems, page 29
www.kodak.com/go/pulseframesupport
6
Getting started
Here or here, get
activation code.
kodakpulse.com
Help
Enter it here.
Activating your frame—www.kodakpulse.com
The activation screen appears the first time you connect to your wireless network (see
page 5). Activating your digital frame is the first step in adding pictures from your
computer to your digital frame using a free, Web-based application. In addition, you
can set up your account so that you and your friends can email pictures to your digital
frame. You can even add pictures to your digital frame from KODAK Gallery or from
FACEBOOK Social Network accounts, if available in your region or language.
You can activate multiple digital frames on your account.
NOTE: If someone else set up your digital frame or if you are receiving it as a gift, the activation screen may
not appear. See Is this PULSE Digital Frame a gift?, page 12.
1 Write down and save the frame activation code.
■ A 6-character activation code appears on the
screen after the digital frame is connected to
your wireless network.
■ You can also find a different, 12-character
activation code on the package beneath the
serial number and UPC bar code. Your package
may look different from the illustration.
NOTE: You can use either activation code.
2 Go to www.kodakpulse.com.
a Create a new account or sign in to your
existing account.
and enter your activation code.
your computer, click
Help
.
b Follow the instructions to set up your account
Your PULSE Digital Frame communicates with the Web
server to verify your account information.
NOTE: For details on working with your kodakpulse.com account on
7 www.kodak.com/go/pulseframesupport
Getting started
kodakpulse.com
Help
Adding pictures to your digital frame
Add pictures to your digital frame wirelessly with your
kodakpulse.com account.
IMPORTANT:
NOTE: For details on adding pictures wirelessly with your kodakpulse.com account, click
Copy pictures from a memory card or USB device.
Your digital frame must be activated before you can add pictures
wirelessly (see page 7).
1 Log in to your www.kodakpulse.com account, then
click the Add Pictures tab.
2 Add pictures three ways:
■ From your computer—Under Computer,
click Add pictures from your computer.
■ From FACEBOOK or KODAK Gallery—
Under Online Pictures, click Customize
online services to automatically add pictures
from your or your friends’ online accounts.
NOTE: These online services may not be available in all regions and
languages.
■ By email —Under Email, click Customize
email and create an email address for your
digital frame. Then click Invite guests to invite
friends and family to email pictures directly to
your digital frame
Help
1 Insert a card or USB device into the digital frame.
2 Touch the screen to display menu options, then
touch Copy .
For details, see page 22.
.
www.kodak.com/go/pulseframesupport
8
Getting started
Secure, WPS, non-broadcasting, and other special network conditions
Network is secure
If your network is secure (requires a security code or password and is indicated with a
lock icon), the on-screen keyboard appears after you touch your network (see page 5).
1 When prompted, use the on-screen keyboard to
enter the security code (password) for your
network.
NOTE: Security codes may be case sensitive.
■ Touch to switch between upper- and
lowercase characters.
The keyboard default is lowercase.
■ Touch to enter numbers and special
characters.
If you do not know your security code, ask the
person who set up your network.
The digital frame scans for your wireless network. A message appears when it has
successfully connected.
2 When finished, touch OK.
3 Continue with Activating your frame—www.kodakpulse.com, page 7 to finish
your setup.
Wi-Fi Protected Setup (WPS)
If your router supports Wi-Fi Protected Setup, the WPS screen appears after you touch
your network (see page 5).
1 Press the WPS button on your router to automatically connect to your wireless
network.
9 www.kodak.com/go/pulseframesupport
Getting started
2 If your network is secure, touch Specify security code, then enter the
security code for your network. If you do not know your security code, ask the
person who set up your network.
3 If a PIN is required for your network, touch Advanced PIN, then enter your
PIN. (The PIN is commonly found on the router itself). If you do not know your PIN,
ask the person who set up your network.
4 Continue with Activating your frame—www.kodakpulse.com, page 7 to finish
your setup.
Network is not shown after network scan
If your wireless network is not shown after the network scan (see page 5), try the
following:
1 Move your digital frame closer to the router, then
touch Refresh .
2 If your wireless network is still not shown, your
network name (SSID) may not be broadcast. To
enter it manually, touch Non-Broadcast .
The on-screen keyboard appears.
3 Enter your SSID (also called network name). If you
do not know your SSID, ask the person who set up
your network.
NOTE: SSIDs are case sensitive.
If your network is secure, when prompted, enter the security code for your
network.
NOTE: Security codes may be case sensitive.
4 When finished, touch OK.
5 Continue with Activating your frame—www.kodakpulse.com, page 7 to finish
your setup.
www.kodak.com/go/pulseframesupport
10
Getting started
Health Check
button
Connect to your wireless network later
If you chose to bypass the network setup when you first turned on your digital frame,
you can connect to your wireless network at any time by re-opening the wizard.
1 On the back of the digital frame, press the Health
Check button.
2 On the touch screen, after the network status check
is complete, touch Network .
NOTE: You can also touch
Fix it
if it is displayed, and follow
the on-screen instructions.
3 Touch Network Setup Wizard.
4 Return to step 1 (touch Start) under Connecting
with the network setup wizard, page 5.
NOTE: If someone else set up your digital frame, your screen may
show fewer steps.
11 www.kodak.com/go/pulseframesupport
Getting started
Is this PULSE Digital Frame a gift?
Giving the PULSE Digital Frame
Are you giving the PULSE Digital Frame to someone who may not want to worry about
computers, or online accounts, or downloading pictures; someone, maybe your
parents or grandparents, who just want to see their children’s and grandchildren’s
pictures—always fresh, always updated?
You can add the PULSE Digital Frame to your existing kodakpulse.com account, or
create a new one. Then you can maintain the digital frame and add pictures to it, right
from your computer, whether you’re across the street or across the country.
NOTE: The digital framedigital frame must be connected to the recipient’s home wireless network, at their
location.
Get started—create an account, activate the digital frame, and add pictures before
you give the digital frame as a gift. You don’t even have to take it out of the box!
1 On your computer, go to www.kodakpulse.com.
Follow the screen directions to:
2 Create an account. For details, click Help.
3 Activate the digital frame. See Activating your
frame—www.kodakpulse.com, page 7.
4 Add pictures from your computer. See Adding
pictures to your digital frame, page 8.
Present your gift—If you are the recipient, see Receiving the PULSE Digital Frame,
page 13.
www.kodak.com/go/pulseframesupport
12
Getting started
Receiving the PULSE Digital Frame
If you received your PULSE Digital Frame as a gift, the person who gave it to you may
already have created an account, activated the digital frame, and added pictures.
Connect to your wireless network
1 Plug in the digital frame and select your language (page 2).
2 Connect the digital frame to your wireless network to receive pictures wirelessly or
by email. See Connecting to your wireless network, page 5.
If the person who gave you the digital frame already added pictures, the pictures
will begin downloading to the digital frame.
NOTE: There may be a delay before the pictures begin playing on your digital frame. Download times can
vary due to the number of pictures, size of picture files, your Web connection speed/strength and
geographical location. Also, the first download to your digital frame is usually more delayed than
subsequent downloads.
Account information correct?
After you connect to your wireless network, a confirmation screen appears with your
information.
■ If the information shown is correct, touch OK.
Touch Play if pictures have already been added or, if not, follow the screen
directions to add your own pictures.
■ If the information shown is not correct, touch Not Me twice.
Touching Not Me again deletes all pictures on the digital frame, and the digital
frame is removed from the current online account. You can then reactivate your
digital frame with your information. See Activating your
frame—www.kodakpulse.com, page 7.
13 www.kodak.com/go/pulseframesupport
2 Viewing pictures
Viewing pictures on your digital frame
■ The pictures in your digital frame internal memory
play automatically whenever the frame is on. For
details about the automatic on and off features, see
page 3.
If there is a memory card or USB device inserted, the
pictures on the card or device play.
If this is the first time you turned on your digital frame
see Chapter 1, Getting started.
■ If there are no pictures in the digital frame internal memory yet, see Adding
pictures to your digital frame, page 8.
■ To view different pictures, or for different ways to view pictures, see Searching for
and viewing pictures, page 15.
NOTE: Your digital frame contains pre-loaded sample pictures, which play only when there are no other
pictures loaded (from a memory card, USB device, or internal memory). Sample pictures cannot be
deleted.
To exit the sample picture slide show: add pictures to your digital frame (see page 8) or insert a
memory card or USB device (see page 21).
www.kodak.com/go/pulseframesupport 14
Viewing pictures
Searching for and viewing pictures
1 Touch the screen to display menu options, then
touch the picture sources button .
All of the picture sources and friends on your digital
frame are listed. Sources with recently added pictures
are indicated with a red bar and the number of new
pictures .
2 Touch an icon to view pictures.
■ Touch a picture source (see page 16) to view
the pictures or albums in that source.
■ Touch Play all to view all the pictures on
your digital frame.
■ Touch Play recent to view the most recent
pictures from all sources.
Pictures in all sources, except playlists, play in random
order.
NOTE: To create custom ordered playlists, sign in to your
account at kodakpulse.com and click
Playlists/ create.
3 When all of the pictures in the source have played,
the slide show repeats.
Current pictures/
15 www.kodak.com/go/pulseframesupport
Viewing pictures
Picture sources
Touch a picture source to view the pictures or albums in that source.
Playlist Custom albums you create to organize your pictures. Playlists play
pictures in the order you created.
To create playlists, log in to your kodakpulse.com account and
click Current pictures/Playlists/create.
If your playlists don’t appear on the digital frame, you may need to
update your firmware (see page 28).
Added by
you
Friends
from Web
Friends by
email
Memory
card or USB
device
Pictures and albums added from your computer or copied from an
inserted memory card or USB drive.
Pictures and albums added from your and your friends’ FACEBOOK
and KODAK Gallery accounts.The online service icons shown here
appear if an avatar (profile picture) is unavailable.
NOTE: These online services may not be available in all regions and
languages.
Pictures emailed to the digital frame from you and your invited friends.
The email icon shown here appears if an avatar (profile picture) is
unavailable.
Pi ctures on a n inser ted car d or USB device. The icon indicates the type
of card or device currently inserted.
www.kodak.com/go/pulseframesupport
16
Viewing pictures
Receiving pictures wirelessly
When your digital frame receives new pictures wirelessly (see page 8), the picture
sources button appears , indicating how many new pictures have arrived.
1 Touch the picture sources button .
2 Touch Play now to view the new pictures as a slide
show. When the slide show is finished, touch Play
again to see them again, or touch Done to return
to your previous playing mode.
3 Touch Play later to return to your previous playing
mode. To view the new pictures later, touch the
screen to display icons, and return to step 1 above.
NOTE: To turn off the notification feature, sign in to your account at
the
Frame settings
tab.
www.kodakpulse.com
, then click
Sending a quick comment
Let friends know how much you appreciate their pictures! When the digital frame
receives a picture via FACEBOOK or email, send your friend a quick comment.
1 Navigate to the picture you want to comment on,
then touch the comment button .
The comment button only appears with pictures that
were received from FACEBOOK or by email.
2 On the Quick Comment screen, touch a comment,
then touch Send.
FACEBOOK pictures—your comment appears with the
picture in your friend’s FACEBOOK Account.
Emailed pictures—your comment is emailed to your
friend.
NOTE: If you do not see the quick comment icon, you may need to upgrade your digital frame firmware
(see page 28). FACEBOOK may not be available in all regions and languages.
17 www.kodak.com/go/pulseframesupport
Viewing pictures
Previous picture
Next picture
Play
Scrolling through your pictures
■ Swipe your finger left or right across the screen to navigate through your pictures.
■ Touch the screen to display menu options.
Swiping is disabled when the menu options are
displayed.
■ Touch < or > to display the previous or next picture.
■ Touch the play button to start the slide show. To
pause the slide show, touch the screen.
Rotating pictures
■ Navigate to the picture you want to rotate, then
touch the rotate button .
Each touch rotates the picture 90° clockwise. The
digital frame remembers the final rotation setting.
NOTE: If you do not see the rotate icon, you may need to upgrade
your digital frame firmware (see page 28).
You can also rotate pictures from kodakpulse.com. Sign in to your account and
click Current pictures.
www.kodak.com/go/pulseframesupport
18
Viewing pictures
Displaying picture information
Picture information includes: the person who sent the picture, source, date, and the
picture’s number/total number of pictures on the digital frame (for example,
150/2500).
■ Touch to display information about the picture.
Touch again to turn off the information.
Want your picture info always displayed?
Go to kodakpulse.com, sign in to your
account and click Frame settings.
Viewing pictures as a collage
View a revolving five-picture slide show.
■ Touch the screen to display menu options, then
touch the collage button .
Five pictures are arranged on the screen and change
every few seconds.
■ To exit collage mode, touch a picture.
The picture appears full screen.
You can also change to collage view from your kodakpulse.com account. Sign
in to your account and click Frame settings.
19 www.kodak.com/go/pulseframesupport
Viewing pictures
Touch the screen to display menu
options, then touch the transition
time button .
Select a transition type (see below).
1
2
Changing transition type and time
Specify the type of transition between pictures and how long each picture stays on the
screen.
3 seconds, wipe—pictures change every 3 seconds, with wipe transition.
10 seconds, fade (default)—pictures change every 10 seconds, with fade
transition.
10 seconds, zoom & pan—pictures are presented with a slow zooming and
panning effect, with fading transitions every 10 seconds.
30 seconds, fade—pictures change every 30 seconds, with fade transition.
30 minutes, fade—pictures change every 30 minutes, with fade transition.
Smart—pictures initially change every 3 seconds, then gradually increase to every
30 minutes.
You can also change the transition type and time from your kodakpulse.com
account. Sign in to your account and click Frame settings.
www.kodak.com/go/pulseframesupport
20
Viewing pictures
MULTIMEDIA Card (MMC)
To insert a card, push it firmly into the slot until it stops.
To remove a card, pull it out of the slot.
*IMPORTANT:
XD-Picture Card
SECURE DIGITAL (SD), SECURE DIGITAL High
Capacity (SDHC)
Bottom slot:
MS Duo, MS PRO Duo
MEMORY STICK (MS), MS PRO
Top slot*:
Inserting a memory card
Do not insert an MS Duo or MS PRO Duo card in the top slot. It may
be difficult to remove.
If you are using a micro or mini memory card, insert it into an adapter
first or it could get stuck in the digital frame card slot.
Viewing pictures from a memory card or USB device
■ To view pictures from a memory card or USB device, insert it into the digital frame.
The pictures on the card or device start playing automatically.
■ When you remove the card or device, the digital frame returns to playing the
pictures from internal memory in your previous playing mode.
■ You can leave the card/device in the digital frame and switch between viewing
pictures from the card/device, internal memory, or other connected sources. See
Searching for and viewing pictures, page 15.
21 www.kodak.com/go/pulseframesupport
Viewing pictures
CAUTION:
Supported USB devices include a flash drive,
card reader, hard drive*, etc.
USB devices and cables are sold separately.
* External hard drives must be self-powered
and formatted as FAT32.
Inserting a USB flash drive or other device
Copying pictures from a memory card or USB device
Copy pictures from a memory card or USB device to your frame internal memory.
NOTE: Copying from internal memory to a memory card or USB device is not supported.
1 Insert a memory card or USB device (see page 21).
The pictures start playing.
2 Touch the screen to display menu options, then
www.kodak.com/go/pulseframesupport
touch the copy button .
Removing a card or disconnecting a
device while copying may damage
your card, pictures, or device.
22
Viewing pictures
3 To copy the currently displayed picture, touch Current picture.
To copy all of the pictures on the card or USB device, touch All pictures.
The selected pictures are copied to the digital frame internal memory.
To exit without copying, touch Cancel.
NOTE: The copies added to the digital frame are automatically resized to a lower resolution (smaller file
size). Full resolution is unnecessary for viewing and quickly fills up the digital frame memory.
Pictures copied to your digital frame from a memory card or USB device do not
appear in the Current pictures tab on your kodakpulse.com account; they
also are not available to be included in playlists.
Deleting pictures
Deleting a single picture from the digital frame or memory card
You can delete pictures one at a time from your digital frame internal memory, or from
an inserted memory card or USB device.
1 Choose the picture source from which you want to
delete a picture (internal memory, memory card, or
USB device), see page 15.
2 Navigate to the picture you want to delete, then
touch the delete button .
3 Touch Delete picture to confirm deletion.
The selected picture is deleted.
To exit without deleting, touch Cancel.
IMPORTANT:
23 www.kodak.com/go/pulseframesupport
To avoid deleting pictures from an inserted memory card or USB device,
remove it before deleting pictures from your digital frame.
Pictures deleted from internal memory are also removed from the Current
pictures tab in your kodakpulse.com account.
Viewing pictures
Help
Deleting multiple pictures using kodakpulse.com
1 Sign in to your account at www.kodakpulse.com,
then click the Current pictures tab.
Make sure you first create your free online account
and activate your digital frame (see page 7).
2 Select the pictures to delete, then follow the screen
directions.
For details, click Help.
NOTE: The Current pictures tab contains all the pictures that were wirelessly uploaded to your digital frame
(from your computer, from online services, or emailed). It does not contain pictures that were copied
to the digital frame internal memory from a memory card or USB drive.
www.kodak.com/go/pulseframesupport
24
3 Health Check
Health check screen
Press to manually open
the Health check screen
Automatic problem notification—
press to open the Health check screen
The Health check screen lets you: check wireless network status, update the digital
frame firmware, check display information, set up or reconnect to your wireless
network, and view help information.
Opening the Health check screen
There are two ways to open the Health check screen:
■ Press the Health Check button on the back of the PULSE Digital Frame.
■ Press the Health Check button on the frame screen; the button automatically
appears on the screen if a wireless network connection problem is detected.
25 www.kodak.com/go/pulseframesupport
Health Check
Wireless network
connection status
Checking wireless network status
1 Open the Health check screen (see page 25).
2 The status of your wireless network is displayed.
Successful connections are indicated with blue arrows.
Unsuccessful connections are red.
3 To resolve problems, touch Fix it .
For more troubleshooting help, see page 29.
About—Checking PULSE Digital Frame information
1 Open the Health check screen (see page 25).
2 Touch About to display this information about your PULSE Digital Frame:
■ Serial number
■ Firmware version
■ MAC address—hardware ID of device (Media Access Control)
■ Email address, PULSE Account—account email address, not the digital frame
email address
■ Admin name—the person who created the PULSE Account
■ Owner name—the person who owns the digital frame
www.kodak.com/go/pulseframesupport
26
Health Check
Network—Setting up a new or advanced network
1 Open the Health check screen (see page 25).
2 Touch Network , then touch one of the setup options:
■ Network setup wizard—reopen the setup wizard to begin setup from the
beginning. See Connect to your wireless network later, page 11.
■ Advanced network setup—modify advanced network settings, including
DHCP, IP address, subnet mask, gateway, DNS address, and proxy information.
To clear all network settings, touch Remove from Network.
Help—Getting more information
1 Open the Health check screen (see page 25).
2 Touch Help to display helpful hints about how to resolve problems or proceed
with the current task.
27 www.kodak.com/go/pulseframesupport
Health Check
CAUTION:
Updating digital frame firmware
Firmware is the software that runs on your digital frame. Your digital frame
automatically prompts you when new firmware becomes available. Follow the
on-screen instructions to install it.
IMPORTANT:
To update your firmware:
1 Open the Health check screen (see page 25).
2 Touch About. .
3 Touch Check for frame updates to check for new firmware.
If the New Update Available option is displayed, new firmware is available for
download. Touch this option to start the update.
The firmware update screen appears on your digital frame as the new firmware is
downloaded and installed.
When the update is complete, the digital frame automatically restarts.
New features are available with the latest firmware updates. For example,
quick comment, rotate pictures, and playlists were added in a recent
firmware release. If these features aren’t available on your digital frame,
update your firmware to add them.
Do not turn off the digital frame during the update. Doing so can
permanently damage your digital frame!
www.kodak.com/go/pulseframesupport
28
4 Troubleshooting and support
For product support, go to www.kodak.com/go/pulseframesupport.
Getting help on your digital frame
Help button
Touch the Help button (available on most network screens) to display helpful
hints about how to resolve problems or proceed with the current task.
Wireless network connection problems
If there is a problem with your wireless network
connection, the Health Check button appears
on the screen. Touch this button to open the Health
check screen and run a connection test. See
Chapter 3, Health Check.
29 www.kodak.com/go/pulseframesupport
Troubleshooting and support
Troubleshooting problems with your digital frame
Problem Try one or more of the following
My digital frame
screens are in the
wrong language.
Pictures downloaded
to my digital frame
from kodakpulse.com
don’t arrive or arrive
slowly.
The digital frame does
not turn on.
I cannot exit the
sample picture slide
show.
■ Touch Back until the language screen is displayed. Reselect
your language.
■ On your computer, sign on to your kodakpulse.com account, click
Frame Settings -> Advanced, and select your language from
the drop-down list.
■ Reset your digital frame. Press the Power and Health Check
buttons at the same time.
IMPORTANT:
Resetting the digital frame deletes all pictures,
deactivates the digital frame from your
kodakpulse.com account, and returns all settings to
factory defaults.
The digital frame is reset and returns to the initial language screen.
See page 4 to reselect you language, reconnect to your wireless
network, and reactivate the digital frame.
■ Please be patient. There may be a delay before the pictures begin
playing on your digital frame. Download times can vary due to the
number of pictures, size of picture files, your Web connection
speed and geographical location. Also, the first download to your
digital frame is usually more delayed than subsequent downloads.
■ Your router signal may be weak. Try moving your digital frame
closer to, or into the same room with, your router. To check your
router signal strength, press Health Check (see page 26).
■ Make sure the power cable that was included with your digital
frame is connected securely (see page 2).
■ Unplug the power cable for 5 seconds, then reconnect the cable. If
the digital frame does not turn on automatically, press the Power
button.
■ Add pictures to your digital frame (see page 8).
■ Insert a memory card or USB device (see page 21).
www.kodak.com/go/pulseframesupport
30
Troubleshooting and support
Problem Try one or more of the following
The digital frame turns
on or off by itself.
The digital frame turns
on or off at
unexpected times.
The digital frame
freezes or doesn’t
work properly.
■ The energy saver schedule is enabled. To change on/off times or to
disable this feature, go to www.kodakpulse.com, sign in to your
account, then click the Frame Settings tab.
■ The activity sensors in your PULSE Digital Frame may be learning
your home environment’s light and sound levels. See Learning
more about activity sensors, page 32.
■ Press the Health Check button on the back of the digital frame (see
page 25). If a problem is indicated on the network status screen,
press Fix it and follow the screen directions. If no network
problem is indicated, press Exit to return to slide show.
■ The digital frame’s transition time may be set for 30 minute, fade
or Smart. See Changing transition type and time, page 20.
■ Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the Power button (for about 2 seconds), then
release.
My digital frame
activation code is no
longer displayed.
Nothing happens
when a memory card
or USB device is
connected.
■ To show the activation code again during your digital frame setup,
press the Health Check button on the back of the digital frame,
then touch Fix it.
■ Insert a certified SD, SDHC, MMC, XD, or MS card, with images,
into the upper designated card slot, then push to seat it (see
page 21).
■ Insert a certified MS Duo or MS PRO Duo card, with images, into
the lower designated card slot only, then push to seat it (see
page 21).
NOTE: Do not insert an MS Duo or MS PRO Duo card in the top slot. It may be
difficult to remove.
■ Make sure the USB device is connected securely (see page 21).
■ Make sure the file format of your pictures is supported (see
page 34).
NOTE: Pictures may take a longer time to display when the files are large or
when using a large capacity memory card or other connected device.
31 www.kodak.com/go/pulseframesupport
Troubleshooting and support
Learning more about your digital frame
www.kodakpulse.com Activate your digital frame
Add pictures to digital frame
Customize online services
Change advanced settings
Manage your account
View Help
www.kodak.com/go/pulseframe Learn more about your digital frame
www.kodak.com/go/pulseframesupport Interactive tutorials
Frequently asked questions
Downloads
Product registration
Learning more about activity sensors
The sensors built in to the PULSE Digital Frame (not available on earlier PULSE Digital
Frames) measure both light and sound levels in a room to turn the digital frame on
and off—saving energy. The sensors are adaptive; they automatically adjust to the
light and sound levels in the room to minimize energy consumption while maximizing
your enjoyment.
IMPORTANT:
How do the adaptive sensors work?
A default threshold of light and sound level is set at the factory. When the digital
frame is turned on, it begins to measure the level of light and sound it sees and hears
in the room. The digital frame will stay on if the light and sound level stay above the
default levels. The digital frame will turn off automatically if the light
When you first plug in your digital frame, the activity sensors take about 24
hours to adjust to the typical light and sound levels in your home
environment. During the first 24 hours, your digital frame may turn on and
off at unexpected times.
OR sound
www.kodak.com/go/pulseframesupport
32
Troubleshooting and support
levels fall below the default levels for a full 20 minutes. If during the 20 minute period
either the light OR sound levels elevate to above the default setting, the 20 minute
period will start again.
If you press the power button to turn the digital frame on or off manually, the activity
sensors are disabled for 60 minutes.
How does the digital frame adapt to your environment?
Every 24 hours (from the time you first turn on the digital frame), the digital frame
resets the threshold light and sound levels from which it determines when to turn on
and off. The level of light or sound required to turn on a digital frame will change
based on the
If
you place the digital frame in a quiet, dark room, a slight noise and a low level of
minimum levels it se
nses over the past 24 hours.
light (both above the newly defined threshold levels) that last for at least 2 seconds
will turn on the digital frame within 15 seconds. If you place the digital frame in a
loud, bright room it will require more noise and a brighter light level to turn on the
digital frame.
How do the activity sensors differ from a motion sensor?
Motion sensors detect movement. If you have a product with a motion sensor and
your pet walks by, the product will turn on. The light and sound sensors will turn a
digital frame on if you have a pet that makes a high level of sustained noise for a full
2 seconds, but once the pet is quiet again the digital frame will turn off again in 20
minutes.
Want to disable the activity sensors or change the energy saver settings?
Sign on to your kodakpulse.com account, click the Frame settings tab and
select your preferred Energy saving settings.
33 www.kodak.com/go/pulseframesupport
5 Appendix
PULSE Digital Frame specifications
For more specifications, go to www.kodak.com/go/pulseframesupport.
KODAK PULSE Digital Frame
Color display
7 in. (17.8 cm)
Frame
10 in. (26 cm)
Frame
Internal storage capacity
512 MB–pictures added to digital frame are compressed to optimize storage, with no
noticeable impact on image quality
Power supply
7 in. (17.8 cm)
Frame
10 in. (26 cm)
Frame
Communication with USB devices
USB 2.0 High Speed Type A
Wi-Fi wireless network compatibility
Certified compatibility with 802.11 b/g speed routers
Other features
Picture formats JPEG, EXIF 2.2
7 in. (17.8 cm) diagonal digital touch screen LCD, 800 x 600 pixels, 4:3 aspect
ratio, 5.6 x 4.2 in. (14.2 x 10.6 cm) active area
10.4 in. (26.4 cm) diagonal digital touch screen LCD, 800 x 600 pixels, 4:3
aspect ratio, 8.3 x 6.2 in. (21.1 x 15.8 cm) active area
Manufacturer, Model #: Malata MPA-05015, EIAJ class 2 DC plug
Input: 100-240V AC 50/60 Hz. Output: 5V DC 1.5 Amp
Manufacturer, Model #: Malata MPA-520, EIAJ class 2 DC plug
Input: 100-240V AC 50/60 Hz. Output: 5V DC 2.0 Amp
www.kodak.com/go/pulseframesupport 34
Appendix
CAUTION:
CAUTION:
KODAK PULSE Digital Frame
Memory cards
(see page 21)
Temperature Operating: 32 to 104
7 in. (17.8 cm) Frame
Size 7.5 x 6.1 x 1 in. (19.1 x 15.6 x 2.5 cm)
Weight 1 lb (490 g) with AC adapter
10 in. (26 cm) Frame
Size 10.6 x 9 x 1 in. (27 x 22.9 x 2.5 cm)
Weight 2.1 lb (1047 g)
Top card slot: SD, SDHC, MMC, XD, MS, MS PRO
Bottom card slot: MS Duo, MS PRO Duo
° F (0 to 40° C)
Storage: -25 to 160
° F (-32 to 71° C)
Important safety instructions
Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel.
KODAK AC Adapters and Battery Chargers are intended for indoor
use only. The use of controls, adjustments, or procedures other
than those specified herein may result in exposure to shock
and/or electrical or mechanical hazards. If the LCD breaks, do not
touch the glass or liquid. Contact Kodak customer support.
When using this product, it should be installed and operated with
a minimum distance of 7.9 in. (20 cm) for 2.4 GHz operations
between the radiator and your body. This transmitter must not be
collocated or operated in conjunction with any other antenna or
transmitter.
35 www.kodak.com/go/pulseframesupport
Appendix
■ The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit www.kodak/go/accessories.
■ Use only the AC adapter that was packaged with your digital frame. Use of other
AC adapters may damage the digital frame and void your warranties.
■ Do not place digital frame near open flame sources such as lighted candles or
heaters.
■ Do not expose this product to liquid, moisture, or extreme temperatures.
Cleaning your digital frame
IMPORTANT:
Gently wipe the digital frame and screen with a soft cleaning cloth. For fingerprints
on the digital frame, apply light pressure.
Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the digital frame or any of its parts.
Additional care and maintenance
■ Do not allow chemicals, such as lotions, to contact painted surfaces.
■ Service agreements are available in some countries. Contact a dealer of KODAK
Products for more information.
■ For digital frame disposal or recycling information, contact your local authorities. In
the US, visit the Electronics Industry Alliance at www.eiae.org or visit
www.kodak.com/go/support.
www.kodak.com/go/pulseframesupport
36
Appendix
Limited warranty
Kodak warrants KODAK Consumer Electronic Products and Accessories (“Products”),
excluding batteries, to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase. Retain the original dated sales
receipt. Proof of the date of purchase will be required with any request for warranty
repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments, failure to follow Kodak's operation, maintenance or repacking
instructions, failure to use items supplied by Kodak (such as adapters and cables), or
claims made after the duration of this warranty. Kodak makes no other express or
implied warranty for this product, and disclaims the implied warranties of
37 www.kodak.com/go/pulseframesupport
Appendix
merchantability and fitness for a particular purpose. In the event that the exclusion of
any implied warranty is ineffective under the law, the duration of the implied warranty
will be one year from the purchase date or such longer period as required by law. The
option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be
responsible for any special, consequential or incidental damages resulting from the
sale, purchase, or use of this product regardless of the cause. Liability for any special,
consequential or incidental damages (including but not limited to loss of revenue or
profit, downtime costs, loss of the use of the equipment, cost of substitute
equipment, facilities or services, or claims of your customers for such damages
resulting from the purchase, use, or failure of the Product), regardless of cause or for
breach of any written or implied warranty is expressly disclaimed.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless a specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.
www.kodak.com/go/pulseframesupport
38
Appendix
KODAK PULSE Digital Frame, model W730/W730C/W730J/W1030/W730S/W1030S
Regulatory compliance and advisory
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: 1) reorient
or relocate the receiving antenna; 2) increase the separation between the equipment
and the receiver; 3) connect the equipment to an outlet on a circuit different from that
to which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
39 www.kodak.com/go/pulseframesupport
Appendix
ENERGY STAR® qualified product.
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
ENERGY STAR
www.kodak.com/go/pulseframesupport
®
40
Appendix
N137
European Declaration of Conformity
Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
This digital picture display (KODAK PULSE Digital Frame) transmits in 10 dBm. In
France, the power level is limited to 10 dBm in outdoor environments, per regulations.
When in France, use the wireless functions of this device indoors only.
A copy of the Declaration of Conformity can be found at
www.kodak.com/go/declarationofconformity.
Australian C-Tick
Waste Electrical and Electronic Equipment labeling
In Europe: For human/environmental protection, it is your responsibility to dispose of
this equipment at a collection facility established for this purpose (separate from
municipal waste). For more information, contact your retailer, collection facility, or
appropriate local authorities; or visit www.kodak.com/go/recycle.
Product weight with adapter: 7 in., 490 g / 10 in., 1047 g
41 www.kodak.com/go/pulseframesupport
Russian GOST-R
Eastman Kodak Company
Rochester, New York 14650
SRRC certification
China CCC
China RoHS
Appendix
www.kodak.com/go/pulseframesupport
42
Appendix
R
VCCI Class B ITE
Japan Telec
Notice
When this digital frame is connected to a wireless network, it is possible to view
images and other content directly from the Internet.
Eastman Kodak Company, its subsidiaries and affiliates do not control and are not
responsible for any content displayed or viewed.
43 www.kodak.com/go/pulseframesupport
Index 1
A
about button, 26
AC adapter
connecting, 2
safety information, 35
specifications, 34
account name, checking on frame, 26
account, kodakpulse.com, iii
activating frame, 7
activation code, 7, 31
activity sensors, 3, 32
adding pictures to frame, 8
admin name, checking on frame, 26
B
button
about, 26
collage, 19
delete, 23
fix it, 26
health check, ii, 25, 29
help, 27, 29
information, 19
network, 27
picture sources, 15
play, 15
power, ii
quick comment, 17
rotate, 18
transition time, 20
C
card, memory
copy from, 8
copying from, 22
slots, ii, 21
supported types, 21, 35
viewing pictures from, 21
care/maintenance, 36
cleaning, frame, 36
collage
button, 19
viewing pictures as, 19
connecting
wireless network, 5
connector
power, ii, 2
USB, ii, 22
copy pictures, 8
D
delete pictures, 23
digital frame, Pulse, 1
disposal, recycling, 36
E
email, 8
energy saver, 3
F
FACEBOOK
adding pictures from, 8
file formats, supported, 34
www.kodak.com/go/pulseframesupport 44
Index
firmware
checking version, 26, 28
updating, 28
fix it button, 26
flash drive, copy from, 8
flash drive, copying from, 22
formats, picture, supported, 34
frame, digital, 1
freezes up, digital frame, 31
friends, receiving pictures from, 17
G
gift, PULSE Digital Frame, 12
H
health check
button, ii, 25, 29
help
button, 27, 29
display problems, 30
support URLs, 32
wireless network connection, 29
I
icons, screen, i
information
button, 19
getting more on frame, 29
getting more on Web, 32
picture, 19
internal memory capacity, 34
K
keyboard, on-screen, 9
KODAK Gallery
adding pictures from, 8
kodakpulse.com, iii
L
language
changing, 30
setting, 4
M
MAC address, checking, 26
maintenance/care, 36
memory card
copying from, 22
no pictures, 31
slots, ii, 21
supported types, 21, 35
viewing pictures from, 21
N
navigating through pictures, 18
network button, 27
network, wireless.
See wireless network
new pictures, wirelessly, 17
non-broadcast network, 10
O
on/off, unexpected, 31
owner name, checking on frame, 26
P
pictures
adding to frame, 8
deleting, 23
information, viewing, 19
navigating through, 18
45 www.kodak.com/go/pulseframesupport
Index
new pictures notification, 17
playback speed, 20
rotating, 18
sample, pre-loaded, 14
searching for, 15
sources, 15
viewing as collage, 19
viewing from memory card, 21
viewing from USB device, 22
play
button, 18
speed and transition type,
changing, 20
playing/viewing pictures, 14—21
power
auto on/off, 3
auto on/off (energy saver), 31
button, ii
connecting, 2
connector, ii, 2
problems, 30
supply, specifications, 34
previous/next buttons, 18
problem
with frame, 30
with wireless network
connection, 29
PULSE, Digital Frame, 1
Q
quick comment, 17
regulatory compliance, 39
rotating pictures, 18
S
safety information, 35
screen icons, i
searching for pictures, 15
security code (password), wireless
network, 5
serial number, checking, 26
settings
auto on/off, activity sensors, 3
changing on Web, iii
language, 4
transition type and time, 20
slide show
changing transition speed/type, 20
exiting sample pictures, 30
starting and stopping, 18
specifications, product, 34
speed, changing transition time, 20
SSID, wireless network, 5
storage capacity, internal memory, 34
T
touch screen, i
transition time
button, 20
changing speed and transition
type, 20
troubleshooting and support, 29—30
R
recycling, disposal, 36
U
updating firmware, 28
USB
www.kodak.com/go/pulseframesupport 46
Index
connector, ii, 22
device, copy from, 8
device, copying from, 22
device, viewing pictures from, 22
no pictures, 31
type, 34
V
viewing pictures
as collage, 19
from memory card, 21
from USB device, 22
on frame, 14
W
warranty, 37
Web
frame activation,7,31
getting more information from, 32
your account, iii
wireless network
compatibility, 34
connect later, 11
connecting to, 5
help, 29
non-broadcast, 10
not found, 10
secure, selecting, 9
security code, 9, 10
security type, selecting, 10
setup wizard, 5
SSID, security code, 5
status, 26
wizard, wireless network setup, 5, 11
WPS, router protected setup, 9
47 www.kodak.com/go/pulseframesupport
Loading...