Kodak PPS100 User guide

KODAK Portable Power Station
PPS100
User Manual
Please read this manual carefully before operating the product. Please keep this manual with you for further reference.
CONTENTS
1. SET INCLUDES 3
2. INTRODUCTION 4
3. SAFETY INSTRUCTIONS 5
4. TRANSPORTATION 9
5. GET TO KNOW YOUR KODAK PPS100 10
6. CHARGING 11
6.1. WHAT IT CAN POWER 11
6.2. DIGITAL INDICATOR 11
6.3. CHARGING VIA MAINS POWER SUPPLY 12
7. TECHNICAL SPECIFICATIONS 12
8. USING THE KODAK PPS100 13
9. TROUBLESHOOTING 14
10. FREQUENTLY ASKED QUESTIONS FAQ 15
11. STORAGE AND DOWNTIME MAINTENANCE 16
12. SERVICE LIFE OF LITHIUM ION BATTERIES 16
13. DISPOSAL AND RECYCLING 17
14. WARRANTY AND CUSTOMER SERVICE 18
1. SET INCLUDES
No. Item Quantity
1 KODAK Portable Power Station PPS100 1
2 USB to Type-C cable 1
3 USB charger 1
4 Instruction manual 1
Remark: We strongly recommend using standard car power inverter for a better user experience.
1
User Manual
Portable Power Station
PPS100
42 3
2. INTRODUCTION
Congratulations on purchasing KODAK Portable Power Station PPS100 a plug-and-play power supply for outdoor use. With 84 watt-hours of stored energy, you can keep appliances, or electronic devices running.
The KODAK PPS100 Portable Power Station is designed to keep you powered up outdoor in your RV during emergencies or power outages.
Note the following points while reading through this instruction manual:
• This manual was prepared with care and to the best of our knowledge. Contact us should you have any questions relating to the product.
• This manual may not be copied or duplicated, except for personal use.
Disclaimer
• Our company cannot be held liable for damages caused by ire, earthquake, use by a third party, other accidents, intentional misconduct on the part of the customer, abuse or other abnormal conditions.
• Do not repair any damage to the AC plug or power supply on your own.
• The warranty covers all terms and conditions of the warranty. Contents that are not speciied in the
warranty terms and conditions are beyond our responsibility.
• Our company assumes no liability for damages caused by incorrect use or non-compliance with this instruction manual.
• This instruction manual, as well as other language versions can be downloaded as a PDF ile on our website: www.portable-power-stations.com.
• Intended use: The KODAK Portable Power Station PPS100 unit is intended as a power supply for elec- tronic devices with a maximum power consumption of 100 W. Our product is not suitable to be used with equipment that relates to one‘s own personal safety or which relies heavily on electricity, such as medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, ires or machine failures caused by using our product with the aforementioned devices.
4
2. SAFETY INSTRUCTIONS
Observe these instructions to ensure safe usage.
Explanation of symbols
This symbol together with
DANGER means
This symbol together with
WARNING means
This symbol together with
CAUTION means
This symbol together with
ATTENTION means
• Serious injuries include blindness, burns, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
• Injuries include burns, electric shock, etc., which do not lead to hospitalization or permanent treat- ment.
• Property damage: includes buildings, belongings and pets, etc.
Noncompliance may very likely lead
to serious injury or death.
Noncompliance may lead
to serious injury or death.
Noncompliance may lead
to injuries and/or property damage.
Noncompliance may damage the unit.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5
DANGER
Do NOT disassemble, repair or modify the unit or the battery.
Doing so may result in electric shock, ire, etc.
Do NOT place the unit close to or in a ire or expose it to heat. Keep out of direct sunlight.
Doing so may result in ire or injuries.
Do NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Doing so may result in electric shock, ire, etc.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
Connecting to the mains may lead to electric shock, injuries or ire.
Do NOT touch the unit or the plug-in points if your hands are wet.
Doing so may result in electric shock.
Do NOT connect any metallic objects to the AC input or output.
Doing so may result in electric shock, ire, etc.
Do NOT rub your eyes if luid from inside the unit should get in your eyes.
If this should occur, lush eyes with water and seek medical attention immediately. This can lead to blindness.
Do NOT dispose the unit together with household waste.
Follow the local law to dispose the unit.
Do NOT use any inappropriate power cords.
Doing so may result in electric shock, ire, etc.
Do NOT operate the unit above the speciied input voltage.
Doing so may result in electric shock, ire, etc.
Do NOT use the unit if it is not functioning correctly.
Doing so may result in electric shock, ire, damage to the unit, etc.
Do NOT move the unit if it is recharging or in use.
Doing so may result in electric shock, damage to the unit or other injuries.
6
WARNING
Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
Failure to do so may result in a short circuit, smoke or ire if metal dust or small metallic parts come in contact with the connections.
Check the unit prior to every use. Do not use the unit if it is damaged, broken.
If you notice that the unit has any damage or cracks, is broken, or has other abnormalities, do NOT cont­inue to use the unit and contact your dealer or our customer service center.
Do not use the unit if the power cord is damaged or broken.
Keep the unit away from children. Do NOT let children use the power supply unit.
Doing so may result in an accident or injuries. This unit must not be used by children. The unit and its connection cables must be kept out of reach of children. Children must not play with the unit. This unit may only be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are monitored or have been instructed in how to safely use the unit and understand the resulting risks.
Keep this product away from pets.
Do NOT use or store the unit in an area or environment with high temperature.
Doing so may cause the unit to deform or overheat.
Should luid from inside of the unit come in contact with your skin or clothing, wash the aected areas with tap water.
Contact with the luid may result in injuries.
In a storm, unplug the power cord from the socket.
A storm may result in an overcurrent coming from the socket, resulting in overheating, ire or other acci­dents.
Do NOT charge the unit via power supply systems that operate outside of 100240V.
That may otherwise result in overheating, ire, etc.
Do NOT place the unit on its side or upside down while in use or storage.
Doing so may result in leakage or cause the unit to overheat leading to other accidents.
7
CAUTION
If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer service center.
The unit complies with all legal requirements for transport of dangerous goods.
The capacity of the lithium battery pack in the unit exceeds 80 Wh. Based on international standards: If this unit is to be sent by airplane, it must be transported in accordan­ce with IATA standard packaging. IATA instructions and labelling requirements and the relevant declara­tions must be completed.
Make sure that the unit is properly secured when transporting it in a motor vehicle.
Failure to do so may result in damage to the unit, electric shock, overheating, ire and other accidents.
Only charge and use the unit within an ambient temperature of 0 to 40 °C (32 - 104 °F).
Operating the unit above or below this temperature range may result in overheating or reduced perfor­mance.
Switch the unit o immediately if it has accidentally fallen, was dropped or was exposed to vibra­tions.
To prevent accidents, please contact the dealer or our customer service center to have the unit checked and repaired.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
Make sure that the device you are connecting is switched o before you connect it.
A device starting up suddenly may lead to accidents or injuries.
If the protective function is activated and the output of the device is switched o, disconnect the electric devices from the power output. Switch the unit o in case of non-use/storage in order to prevent electric shock and the battery from discharging unnecessarily, etc.
8
4. TRANSPORTATION
1. Carry the unit with both hands.
ATTENTION
Keep the unit away from
other objects when moving.
2. Placing the unit on a stable surface.
Place the unit on a stable surface.
By doing so, it is easier to read the indicators.
3. Transporting the device.
ATTENTION
Take extra care to ensure that the unit is never
allowed to fall to the ground.
ATTENTION
DANGER
The unit should not be subjected to any impact or vibrations.
Otherwise there is a risk of ire.
Keep the unit‘s original packaging and use it when you need to transport the unit.
9
Type-C port(input/output)
USB Output
Digital Indicator
ON/OFF Button
QC3.0 Output
QC3.0 Output
5. GET TO KNOW YOUR KODAK PPS100
220V 85W AC OutputFans
REMARKS
ON/OFF Button
Digital Indicator
USB Output
Type-C port(input/output)
10
1. Press the button to turn on the digital indicator.
2. Press and hold the button for 2 seconds to turn AC outlet ON/OFF.
3. DC ports charge the devices automatically. .
4. We strongly recommend using standard car power inverter for a better user experience.
6. CHARGING
Before use or storage, plug your KODAK PPS100 into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel as soon as possible.
ATTENTION
Only charge the unit when the ambient temperature is between 0 and +40 °C (32 - 104 °F).
6.1. WHAT IT CAN POWER
5W Light
~13 hrs
iPhone 7
~7 recharges
Gaming console
~3 recharges
12“ Macbook
~1.2 recharges
...and many more
6.2. DIGITAL INDICATOR
The LCD Display indicates the percentage of total charge remaining in your KODAK PPS100.
Digital indicator
NOTE
Charging time may vary depending on the ambient temperature involving the solar charger.
End the charging process by switching o the unit and pulling the plug out of the socket.
11
6.3. CHARGING VIA MAINS POWER SUPPLY
Use the USB wall charger provided and plug your KODAK PPS100 into any outlet. When the digital indicators displays 100, the KODAK PPS100 is fully charged. This takes about 7 hours.
7. TECHNICAL SPECIFICATIONS
Charge times
Wall charger (15W) 7 hrs
Battery
Cell type Lithium-ion
Pack capacity 84 Wh
Lifecycles >300
Management system
Type-C Input / Output 5V / 3A
Qualcomm® Quick Charge™ 3.0 Output 5V / 3A, 15W | 9V /2A, 18W | 12V / 1.5A,18W
USB Output 5V / 2.4A
AC Socket 220V 80W (100W max.)
Temperature control, Surge protection, Square wave,
Short circuit protection
Ports
General
Weight 700g (1.54 lbs)
Operating temperature 0 - 40 °C (32 - 104 °F)
Certiicates CE, ETL, FCC, ROHS, UN38.3
Warranty 24 months
12
8. USING THE KODAK PPS100
Track the remaining battey
Press the power button once to check the battery level from LCD display. To ensure you never run out of power, please recharge KODAK PPS100 before use or storage. Highly recommend to recharge KODAK PPS100 at least once every 3 month.
Recharge your KODAK PPS100
Use the AC adapter and USB C cable provided to recharge your KODAK PPS100.
Charge your devices
Charge your mobile phone, tablet, console etc. from the USB port. (Qualcomm® Quick Charge™ 3.0 just for compatible devices)
How to use AC outlet
• Press and hold the button for 2 seconds to activate the AC socket.
• Plug your AC appliance into the KODAK PPS100‘s AC socket to power your the laptop, outdoor lights, etc.
• Press and hold the button for 2 seconds to turn o AC power.
What to power from KODAK PPS100
• USB: Smart Phones, Tablets, EReaders, Digital Cameras, MP3Players, etc.
• AC: Laptops, Small Applicances etc.
• REMARKS: The power consumption of your device will determine the length of time that your KO- DAK PPS100 will be able to supply it with power.
How to use KODAK PPS100
1. Press the button to turn on the digital indicator
2. Press and hold the button for 2 seconds to turn AC outlet ON/OFF
3. DC ports charge the devices automatically
Best-use strategy
• When recharging devices with KODAK PPS100, you should take note of the digital indicator.
• If you plug in devices that have a high power requrement, the charge level of KODAK PPS100 can
drop quickly and you will not be able to extract the entire 84Wh of energy.
• On the other hand, if you’re charging devices that draw power more slowly(tablet or smartphone), you will be able to extract close to the full 84Wh from KODAK PPS100. If yor’re experiencing shorter ren times, you can check the device’s power requirement.
13
Appropriate temperature usage
• Charge protection: KODAK PPS100 can charge your device when the ambient temperature is bet- ween 0 - 40°C. Outside this temperature range, the system automatically stops charging but will restart once the temperature is back inside the acceptable range.
• Discharge protection: KODAK PPS100 can power your devices when the ambient temperature is between 0 - 40 °C. Outside this temperature range the system automatically stops charging your device but will restart once the temperature is back inside the acceptable range.
ATTENTION
Make sure that the electronic device you are powering works properly prior to use. The max. power
consumption for electronic devices is 100W. Due to the dierent types of electric devices,
it is possible that they may not operate even if their power consumption is less than 100W.
9. TROUBLESHOOTING
If your devices are not recharging as they should using KODAK PPS100 follow these steps:
1. Ensure the device has been switched on and the LED is showing the percentage of remaining charge.
2. Check the Battery Display. If it is at 20% or below, recharge your KODAK PPS100.
3. Verify your device is suitable for use with the KODAK PPS100.
a. All KODAK PPS100 output ports have their own max. power. Check the KODAK PPS100’s technical speciications to ensure your device is compatible.
b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in use. In these cases, power down your device and recharge it.
What should I do if the unit gets wet?
Immediately turn o the unit and wait until you are certain that it is completely dry before turning it back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.
14
10. FREQUENTLY ASKED QUESTIONS (FAQ)
1. What type of battery is in my KODAK PPS100?
KODAK PPS100 contains a 84Wh lithium ion battery pack. Lithium ion batteries are much smaller and lighter than normal lead-acid batteries and also can be cycled many more times.
2. How do I know if my KODAK PPS100 is charged?
To check the charge level of your KODAK PPS100, refer to the digital indicator display. The number you see on the display indicates the percentage of total charge remaining. Press the power button to view this display. KODAK PPS100 can be used until it is empty but we recommend to recharge when the level is below 20%.
3. Can I charge the KODAK PPS100 while supplying power at the same time?
Yes and no. The AC output supports simultaneous charging and discharging. Please note, however, that this only makes sense with a remaining battery capacity of more than 10%. The USB ports will not work while the device is charging.
4. Can I take my KODAK PPS100 on a plane?
Yes, it is possible to carry the KODAK PPS100 in your hand luggage. But please always check the individual restrictions of your airline. However, keeping the KODAK PPS100 in the checked baggage is not permitted for safety reasons as it contains lithium ion batteries.
ATTENTION
The inverter output is a modiied sine wave (square wave).
It is not suitable for use with a device with an electric motor.
15
11. STORAGE AND DOWNTIME MAINTENANCE
1. Charging to maximum capacity
Fully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once every three months and store the power supply unit only in a dry and dust-free environment which is out of reach of children. Suitable storage temperature: -20 to 40°C (-4 - 104 °F). Keep out of direct sunlight. Make sure that the unit rests on a stable surface.
2. System shutdown
If the system shuts down automatically because of lower battery capacity, please recharge it.
3. Cleaning
Wipe away any dirt using a damp cloth.
ATTENTION
Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents.
Do not use.
4. Failure
Failure to maintain your KODAK PPS100 by following these steps can result in battery damage which will void the product warranty.
12. SERVICE LIFE OF LITHIUM ION BATTERIES
Charge, supply current between 0 and 40°C (32 - 104 °F). Store between -20 and 40°C (-4 - 104 °F).
Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.
Do not connect a continuous load of more than 100 W.
The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.
Do not continue to charge the battery after it has charged completely.
Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the charging process has been concluded. Otherwise the service life of the lithium battery may be reduced.
Switch o the unit if it is not being used.
Unnecessary power consumption also reduces the running time of the lithium battery.
Fully charge the battery prior to placing it in storage.
Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit at least once a year. After prolonged storage, it may be necessary to charge and discharge the battery several times in order to reach full capacity.
16
13. DISPOSAL AND RECYCLING
Lithium ion battery
As soon as the end of the battery‘s service life is reached, the entire lithium ion battery can be recycled. Do not open or disassemble the unit.
Electric device
Old electric devices may not be disposed together with normal household waste. According to the directive 2012/19/EU, the device must be disposed of in a controlled manner at the end of its service life. The recyclable materials contained in the unit shall be sent to recycling to reduce the burden on the environment.
This unit contains lithium ion batteries. These are hazardous materials and are subject to speciic trans­port and handling regulations. Lithium ion batteries may ignite or explode if handled incorrectly.
For the safe disposal of the unit, contact a collection point or your local municipality for more information and indicate that the unit contains lithium batteries.
Package
The product package consists of recyclable materials. Dispose of these in an environmentally friendly manner and sort the materials in the provided collection systems.
REPAIR TERMS AND CONDITIONS
1. In the case of device failure which can be attributed to poor workmanship, please take the original sales receipt with purchase date (invoice, etc.) to the retail store. In case of normal use, the power supply unit will be repaired or replaced free of charge within the two year warranty period. In additi­on to that, the customer must bear any shipping charges that may occur.
2. The repair is not free of charge in the following cases, even within the warranty period.
• A warranty card or certiicate or sales receipt with purchase date (invoice, etc.) is not presented.
• The equipment failure was caused by improper use (including use that does not comply with the
instructions set forth in the manual).
• Defects were caused by improper repairs, modiications, disassembly, etc.
• Equipment failure was caused by careless operation (dropping/falling/impact/contact with luids/
deposits - on the inside or outside of the machine) or improper maintenance (mildew, dust, etc.).
• Damage was caused by use of unit for purposes other than intended (charged and recharged more than 300 times, etc.)
• Equipment failure occurred due to external inluences, such as power supply or other electric devices and/or damage during inspection or repair.
• Faults that can be attributed to causes that are not cited above are beyond our scope of respon­sibility.
3. Note that we do not assume any liability for consequential damages (foreseeable damages, psy­chological damages, etc.).
17
14. WARRANTY AND CUSTOMER SERVICE
Contact distributor for technical support / customer service
EUROPE [GBT GmbH]
An Gut Nazareth 18A
52353 Düren
Germany
216 Route 206 Suite 1
Hillsborough, NJ 08844
USA
Unit 94 & 96 Allandale Business Park CNR Morkels & Le Roux
Halfway House
Midrand, Johannesburg
South Africa
Telephone:
+49 (0) 2421 / 20 85 60
info@gbt-international.com
USA/Canada [Delta Millenium Inc.]
Toll-Free:
8887655428
info@digitalsupportdesk.com
AFRICA [GBLT South Africa]
Telephone:
+27 (0) 11 / 516 0001
sales@gbt-international.co.za
EMail:
EMail:
EMail:
18
19
GBT GMBH
© 2019 GBT GmbH
An Gut Nazareth 18A, 52353 Düren, Germany | Phone: 02421 / 208560
The Kodak trademark, logo and trade dress are used under license from Kodak.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Quick Charge is a trademark of Qualcomm Incorporated.
All information contained in this document is subject to change without notice.
Loading...