Kodak KLI-8023 User Manual
PRODUCT SUMMARY
KODAK KLI-8023 IMAGE SENSOR
8002 X 3 TRI-LINEAR CCD IMAGE SENSOR
DESCRIPTION
The KODAK KLI-8023 Image Sensor is a multispectral,
linear solid state image sensor for color scanning
applications where ultra-high resolution is required.
The imager consists of three parallel linear photodiode
arrays, each with 8000 active photosites for the output of
R, G, and B signals. This device offers high sensitivity,
high data rates, low noise and negligible lag. Individual
electronic exposure control for each color allows the
KLI-8023 sensor to beused under a variety of illumination
conditions. The imager can be operated in an “Extended
Dynamic Range” mode for the most demanding
applications.
FEATURES
• 12 line spacing between color channels
• Single shift register per channel
• High offband spectral rejection
• Dark reference pixels provided
• Antireflective glass
• Wide dynamic range, low noise
• Dual dynamic range mode operation
• No image lag
• Electronic exposure control
• High charge transfer efficiency
• Two-phase register clocking
• 74ACT logic compatible clocks
Parameter Typical Value
Architecture 3 Channel, RGB Trilinear CCD
Pixel Count 8002 x 3
Pixel Size 9 µm (H) x 9 µm (V)
Pixel Pitch 9 µm
Inter-Array Spacing 108µm (12 lines effective)
Imager Size 72.0 mm (H) x 0.225 mm (V)
Saturation Signal
Dynamic Range
(2 MHz Data Rate)
Responsivity
(wavelength= 460, 540, 650 nm)
Output Sensitivity 14.4 µV/electron
Dark Current 0.002 pA/pixel
Dark Current Doubling Rate 8° C
Charge Transfer Efficiency 0.999998/Transfer
Photoresponse Non-uniformity 3% Peak-Peak
Lag (First Field) 0.025%
Maximum Data Rate 6 MHz/Channel
Package CERDIP (Sidebrazed, CuW)
Cover Glass AR coated, 2 sides
Parameters above are specified at T = 25°C (junction temperature) and
1 MHz clock rates unless otherwise noted.
185k electrons (Normal DR mode)
400k electrons (Extended DR mode)
84 dB (Normal DR mode) 90 dB
(Extended DR mode)
14, 17, 26 V/µJ/cm
2
• 6MHz maximum data rate
APPLICATIONS
• Photography
• Medical Imaging
• Scientific Imaging
www.kodak.com/go/imagers
ORDERING INFORMATION
Catalog
Product Name Description Marking Code
Number
4H0614 KLI- 8023-AAA-ED-AA
4H0617 KLI- 8023-AAA-ED-AE
4H0615 KLI- 8023-DAA-ED-AA
4H0618 KLI- 8023-DAA-ED-AE
4H0093 KEK-4H0093-KLI-8023-12-5 Evaluation Board (Complete Kit) N/A
Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass
with AR coating (both sides), Standard Grade
Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass
with AR coating (both sides), Engineering Sample
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass
with AR coating (both sides), Standard Grade
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass
with AR coating (both sides), Engineering Sample
KLI-8023-AAA
(Serial Number)
KLI-8023-DAA
(Serial Number
Please see ISS Application Note “Product Naming Convention” (MTD/PS-0892) for a full description of naming convention
used for KODAK image sensors.
For all reference documentation, please visit our Web Site at www.kodak.com/go/imagers.
Please address all inquiries and purchase orders to:
Image Sensor Solutions
Eastman Kodak Company
Rochester, New York 14650-2010
Phone: (585) 722-4385
Fax: (585) 477-4947
E-mail: imagers@kodak.com
Kodak reserves the right to change any information contained herein without notice. All information furnished by Kodak is
believed to be accurate.
©Eastman Kodak Company, 2008. Kodak and Pixelux are trademarks Revision 4.0
Loading...