Kodak KLI-6013 User Manual

PRODUCT SUMMARY

KODAK KLI-6013 IMAGE SENSOR

6002 X 3 TRI-LINEAR CCD IMAGE SENSOR

DESCRIPTION

The KODAK KLI-6013 Image Sensor is a multispectral,
linear solid-state image sensor for color scanning
applications where high resolution and high dynamic
range are required. The imager consists of three
parallel linear photodiode arrays each with 6000 active
photosites for the output of R, G, and B signals. This
device offers high sensitivity, high data rates, low noise
and negligible lag. Individual electronic exposure control
for each color allows the sensor to be used under a
variety of illumination conditions. There are 16 light­shielded elements at each end of each array.

FEATURES

• Tri-Linear Color Array 3 x 6002 pixels

• 8 line spacing between color channels

• Single shift register per channel

• High off-band spectral rejection

• Dark reference pixels provided

• Antireflective glass

• Wide dynamic range, low noise

• No image lag

• Electronic exposure control

• High charge transfer efficiency

• Two-phase register clocking

• 74ACT logic compatible clocks

• 10MHz maximum data rate

APPLICATIONS

• Photography

Parameter Typical Value

Architecture 3 Channel, RGB Trilinear CCD
Pixel Count 6002 x 3
Pixel Size 12 µm (H) x 12 µm (V)
Pixel Pitch 12 µm
Inter-Array Spacing 96 µm (8 lines effective)
Imager Size 72.0 mm (H) x 0.20 mm (V)
Saturation Signal 275,000 electrons
Dynamic Range 72 dB
Responsivity
(wavelength = 460, 550, 650 nm)
Output Sensitivity 8 µV/electron
Dark Current 0.02 pA/pixel
Dark Current Doubling Rate 9° C
Charge Transfer Efficiency 0.99999/Transfer
Photoresponse Non-uniformity 6% Peak-Peak
Lag (First Field) 0.5%
Maximum Data Rate 10 MHz/Channel
Parameters above are specified at T = 23°C (junction temperature) and
1 MHz clock rates unless otherwise noted.

19, 24, 33 V/µJ/cm

2

• Industrial Imaging

• Scientific Imaging

www.kodak.com/go/imagers

ORDERING INFORMATION

Catalog

Product Name Description

Number

4H0625 KLI- 6013-AAA-EB-AA

4H0631 KLI- 6013-AAA-EB-AE

4H0620 KLI- 6013-AAA-ED-AA

4H0626 KLI- 6013-AAA-ED-AE

4H0624 KLI- 6013-DAA-EB-AA

4H0630 KLI- 6013-DAA-EB-AE

4H0622 KLI- 6013-DAA-ED-AA

4H0628 KLI- 6013-DAA-ED-AE

4H0092 KEK-4H0092-KLI-6013-12-5 Evaluation Board (Complete Kit)

Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass (no coatings), Standard
Grade
Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass (no coatings),
Engineering Sample
Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass with AR coating (both
sides), Standard Grade
Monochrome, No Microlens, CERDIP Package (leadframe), Clear Cover Glass with AR coating (both
sides), Engineering Sample
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass (no coatings), Standard
Grade
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass (no coatings), Engineering
Sample
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass with AR coating (both
sides), Standard Grade
Color (RGB), No Microlens, CERDIP Package (leadframe), Clear Cover Glass with AR coating (both
sides), Engineering Sample

Please see ISS Application Note “Product Naming Convention” (MTD/PS-0892) for a full description of naming convention
used for KODAK image sensors.

Address all inquiries and purchase orders to:

Image Sensor Solutions
Eastman Kodak Company
Rochester, New York 14650-2010

Phone: [phone]
Fax: [phone]
E-mail: [e-mail]

©Eastman Kodak Company, 2006. Kodak and Pixelux are trademarks. Revision 3.0