Kodak i2900 Scanner Reference Manual

See the User’s Guide for feed module and front transport

roller replacement procedures.

To order supplies contact your reseller or go to:
www.kodak.com/go/scannersupplies

*Part numbers must be ordered from Parts Services.
In the United States call:1-800-431-7278

IMPORTANT:

 The Roller Cleaning Pad contains sodium lauryl ether

sulfate which can cause eye irritation. Refer to the
MSDS for more information.

 Staticide Wipes contain isopropanol which can cause

eye irritation and dry skin. Wash your hands with soap
and water after performing maintenance procedures.
Refer to the Material Safety Data Sheet (MSDS) for
more information (www.kodak.com/go/MSDS).

EASTMAN KODAK COMPANY
343 State Street / Rochester, NY 14650 U.S.A.
A-61773 / Part #5K2094 March 2013
© Eastman Kodak Company, 2013
TM: Kodak

i2900 Scanner

Reference Guide

Replace pre-separation pad

Replace separation roller

Pre-separation Pad

Separation Roller

Supplies and Accessories

CAT No. Description

129 9676 Feeder Consumables Kit
136 4421 Black Background Strip
896 5519 Staticide Wipes for Kodak Scanners
169 0783 Transport Cleaning Sheets
853 5981 Roller Cleaning Pads
818 3386 Black Ink Cartridge
159 6832 Red Ink Cartridge
176 3325 Flatbed Background

CAT No. Accessories

132 4391 Printer Accessory
189 4351 A3 Flatbed Accessory

Part No.* Accessories

9E5146 Printer Carrier

Kodak Service & Support

www.kodak.com/go/disupport

1.800.822.1414

(US&C only; all other regions, contact your local
Kodak Support Center)

When contacting support, have the following available:

• A description of your problem

• Scanner model and serial number

• Computer configuration

• Software application you are using

Codes

Code LED Explanation

U1 Red Check the imaging guides.
U2 Red Ink cartridge missing.
U3 Red Document too long.
U6 Red Scanner cover open.
U7 Red • Too much paper is in the input

tray.

• The feed module is not inserted
properly.

U8 Red Multifeed stop.
U8 Green flash Multifeed paused; waiting for

user input.

U9 Red Document jam or the paper path

is blocked.

U41,

U42

Red

Calibration failed. Try the
calibration again. If it fails
again, call Service.

U51 Red Timeout: USB disconnected

while scanner was running.
Rescan documents.

U52 Red Timeout. Rescan documents.
U53 Red USB speed is not supported. Be

sure you are using a USB 2.0 (or
higher) connection.

U55 Red USB events over threshold.

Rescan documents.

U56 Red Image capture already started.

Rescan documents.

U57 Red Image footer is missing. Rescan

documents.

E Red flash • Be sure all cables are

connected properly.

• Turn power off and then on
again.

If problem persists, call Service.

Clean the transport, rollers

and background strips

Running a transport cleaning sheet and

clean the imaging guides

For detailed cleaning and replacement procedures see Chapter 5, Maintenance in the User’s Guide.