3 Cartridge status indicator light 11 Paper status indicator light
4 (4-way button)12 USB device connector
5 Print button/light 13 USB connector (to computer)
6 Red-eye reduction button/light 14 Power connector (DC-in)
7 Camera battery status light15 Connector cover for optional battery
www.kodak.com/go/g600support1
11 10
9
7
8
6
5
910Transfer button/light
Pull-out handle
ENGLISH
Load cartridge and paper
Use only Kodak color cartridge & photo paper kits , sold at www.kodak.com/go/accessories.
Remove ribbon slack.
1
4
Insert cartridge.
2
Glossy side up. Do not fill above
paper-limit line,, inside
paper tray (maximum 30 sheets).
3
2www.kodak.com/go/easysharecenter
5
Connect camera insert and power
ENGLISH
1
2
Your AC power adapter
may not require assembly
www.kodak.com/go/g600support3
3
4
Custom camera insert
included with your camera
ENGLISH
Dock camera and print
Note: To avoid cropping, use your camera’s 3:2 Picture Size setting. (See your camera user’s guide.)
1
Push down to seat the connector.
Press OK/Print. (Each picture makes 4 passes
3
through the printer.)
Select pictures to print:
2
Press to locate a picture.
Press to select print quantity.
Repeat for each picture.
5 in.
12.7 cm
Allow space
for printing.
IMPORTANT: During printing, do not pull out
the print. The printer dock automatically
ejects the finished print after the fourth pass.
4www.kodak.com/go/easysharecenter
Keep learning!
Congratulations!
You have:
• set up your printer
• printed pictures
Keep learning!
Finish reading this book, so you can print and share your best pictures!
Visit www.kodak.com/go/g600support and
www.kodak.com/go/easysharecenter for:
• the extended user’s guide
• interactive troubleshooting and repairs
• interactive tutorials
• FAQs
• downloads
• accessories
• projects, printing tips
• product registration
ENGLISH
www.kodak.com/go/g600support5
ENGLISH
Select pictures on camera and print*
1Press the Share button.
Press to locate a picture.
2
Highlight Print, then press OK.
3
* For Kodak EasyShare cameras only. For other brands of ImageLink
system compatible cameras, see your camera user’s guide.
Press to select copies, then press OK.
4
Repeat steps 2-4 to tag more pictures.
Dock camera, then press Print.
5
Selected pictures are printed.
6www.kodak.com/go/easysharecenter
Take the printer dock with you
ENGLISH
123
click
Optional battery installation
www.kodak.com/go/accessories
Slide tray into grooves.
12
Battery charges when printer dock is plugged in.
Steady green = Charging complete
click
Blinking green = Battery charging
www.kodak.com/go/g600support7
ENGLISH
Crop pictures on camera before printing*
Press the Review button, then press to locate a picture.
1
Press the Menu button, highlight Crop, then press OK.
2
Press the Telephoto/Wide (T/W) buttons (on the camera) to size the crop box.
3
Press to move the crop box, then press OK.
Follow the screen prompts.
4
Note: The original picture is saved.
Cropped picture
* For Kodak EasyShare digital cameras only. For other brands of ImageLink
system compatible cameras, see the camera user’s guide.
Cropped printed picture
8www.kodak.com/go/easysharecenter
Transfer pictures, print from a computer
IMPORTANT: Load the software before connecting the printer dock to the computer.
Load software, then follow the
1
screen prompts.
2
3
Dock camera, then press to
4
transfer pictures to your computer.
Print using EasyShare software
5
or other application.
ENGLISH
www.kodak.com/go/g600support9
ENGLISH
Print from a compatible USB device
USB flash drive:
You must dock your camera to review
1
and print pictures from a USB flash drive.
To print, see page 4.
2
PictBridge compatible device:
To print, see your device user’s guide.
Transfer pictures to a USB flash drive
Copy one or all the pictures from your camera to a
USB flash drive.
Press the Transfer button.
1
Follow the screen prompts.
2
10www.kodak.com/go/easysharecenter
Charge the camera battery
Note: Not all cameras are compatible for charging on the G600 printer dock. See your
camera user’s guide for dock compatibility.
Load only a Kodak Ni-MH rechargeable digital camera
1
3
battery (KAA2HR), or a Kodak Li-Ion rechargeable digital
camera battery into the camera (3 hour charging).
ENGLISH
2
Purchase batteries and accessories at a retailer of Kodak products, or visit
www.kodak.com/go/accessories.
4
The camera is now powered by the printer dock instead of
the camera battery. Leave the camera docked to maintain
the charge.
Push down to seat the connector.
www.kodak.com/go/g600support11
ENGLISH
Refresh the camera battery
If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The refresh cycle
completely discharges the battery, then fully charges it. Allow up to 8 hours (or overnight) for a full refresh.
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH rechargeable digital
camera battery (KAA2HR) only. Li-Ion batteries do not require refreshing.
1
2
Push down to seat the connector.
Press and hold (Print layout button) and
3
(Red-eye Reduction button) at the same time for
5 seconds, then release the buttons. (The battery
status light glows green when charging is
complete.)
8 hours for full
refresh
12www.kodak.com/go/easysharecenter
Change the printed picture layout
Follow the steps (except for Press Print) to print from your digital camera or
1
PictBridge compatible device. See page 6.
Note: You can only change the picture layout if a device with a display screen is
docked to your printer dock.
Press the Print-layout button repeatedly to select a picture layout:
2
Picture Layout setting
1-up (full photo)
2-up
Number and size of prints per sheet
One 4 x 6 in. (102 x 152 mm) picture
Up to two 2.1 x 3.3 in. (54 x 85 mm) pictures
ENGLISH
4-up (wallet size)
9-up (mini photo)
Note: A panoramic picture prints on multiple sheets if you select the 1-up picture layout setting.
To print duplicate copies on the same sheet, make sure the print quantity you choose
matches the number of prints in the picture layout you choose.
3
Press (Print button) to begin printing.
IMPORTANT: The printer dock automatically ejects the finished print after the fourth pass.
Do not pull out the print.
Up to four 2 x 3 in. (51 x 76 mm) pictures
Up to nine 1.3 x 2 in. (34 x 51 mm) pictures
www.kodak.com/go/g600support13
ENGLISH
Reduce red eye in your prints
Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.
• Your printer dock defaults to red-eye reduction being always on, and the Red-eye reduction button/light
glows green.
• The Red-eye reduction button is disabled when printing from a computer. If printing from a
computer (see page 9), make sure Kodak EasyShare software is installed on the computer.
• Your printer dock may apply red-eye reduction to an area such as red-painted fingernails,
which darkens the area in your print. In this case, turn off red-eye reduction.
• To turn red-eye reduction off, press the Red-eye reduction button.
• To change the red-eye reduction default to off, press and hold the Red-eye reduction button
for 5 seconds.
The Red-eye reduction light blinks, then turns off.
Red-eye reduction button/light
14www.kodak.com/go/easysharecenter
1Solving printer dock problems
For step-by-step product support, visit www.kodak.com/go/g600support and select
Interactive Troubleshooting & Repairs.
IMPORTANT:
If...Try the following
Multiple sheets of
paper are pulled
through the printer
Use only Kodak color cartridge and photo paper kits with the symbol. Do
not use inkjet paper. Do not load more than 30 sheets of paper (see upper
limit line inside tray)
1 Remove the paper tray (page 2).
2 Remove the paper supply from the tray. Carefully “fan” the paper to
keep the sheets from sticking together.
3 Reload the paper tray (page 2).
4 Re-install the paper tray, then press to resume printing.
.
www.kodak.com/go/g600support 15
Solving printer dock problems
If...Try the following
Paper does not feed
Clean the paper-feed rollers:
1 Remove the paper tray from the printer dock, and leave the
paper-tray door open.
2 Lightly moisten a lint-free cloth with water. (Do not use cotton
swabs, harsh or abrasive cleaners, or organic solvents.)
3 Wipe clean the surface of the paper-feed rollers.
4 Advance the paper-feed rollers using the moistened lint-free cloth,
as necessary, and continue cleaning.
5 Allow the paper-feed rollers to fully dry before reconnecting the
power and inserting the paper-tray.
Paper-feed rollers
16www.kodak.com/go/easysharecenter
If...Try the following
Printer is jammed
(Paper or
color-cartridge jam
message appears on
the camera or
computer)
1 Remove the paper tray (page 2).
2 Remove the paper supply from the paper tray. Carefully “fan” the
paper to keep the sheets from sticking together.
3 Reload then re-install the paper tray (page 2).
4 Disconnect the printer dock power for 10 seconds, then reconnect
the power. (Paper should eject from the rear of the printer dock.)
5 Remove the ejected paper.
IMPORTANT:
Cartridgerelease tab
IMPORTANT:
If there is a cartridge jam:
Always check the paper slot on the back of the printer dock
for jammed paper.
The cartridge may lock in place if there is a paper jam. Do
not attempt to remove the cartridge without first clearing
the paper jam. Make sure there are no paper jam messages
on your camera or computer screen before attempting to
remove the cartridge.
■ Push up on the green cartridge-release tab to release the
cartridge. Remove the cartridge.
■ Remove any slack from the ribbon. Reinstall the cartridge.
6 Press to resume printing.
Solving printer dock problems
Paper slot
www.kodak.com/go/g600support 17
Solving printer dock problems
If...Try the following
After installing a new
color cartridge, the
following error
message appears:
“Empty cartridge.
Replace color
cartridge, then press
Print”.
(The printer does not
recognize the color
cartridge)
1 Open the cartridge door.
Push up on the green cartridge-release tab.
2
3 Remove the cartridge.
4 Reinsert the cartridge.
5 Press Print.
If the error message reappears:
■ Repeat steps 1-3 above, then clean the cartridge sensor with a dry
lint-free cloth.
Sensor
■ Reinsert the cartridge, then press Print.
Kodak photo paper kits are sold separately at a retailer of Kodak products, or visit
www.kodak.com/go/accessories.
18www.kodak.com/go/easysharecenter
2Appendix
Important Safety Instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service
personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and
battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than
those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks,
do not touch the glass or liquid. Contact Kodak customer support. When removing the battery, allow it to cool;
it may be hot.
■ Read and follow all warnings and instructions supplied by the battery manufacturer.
■ Use only batteries approved for this product to avoid risk of explosion.
■ Keep batteries out of the reach of children.
■ Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit,
discharge energy, become hot, or leak.
■ Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.
■ Remove the battery when the product is stored for an extended period of time. In the unlikely event that
battery fluid leaks inside the product, contact Kodak customer support.
■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your
local health provider. For additional health-related information, contact your local Kodak customer support.
■ Dispose of batteries according to local and national regulations.
■ Do not charge non-rechargeable batteries. For more information on batteries, see
http://www.kodak.com/go/batterytypes.
■ Service agreements may be available in your country. Contact a dealer of Kodak products for more
information.
Limited warranty
Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free
from malfunctions and defects in both materials and workmanship for one year from the date of purchase.
Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for
warranty repair.
Warranty service is only available from within the country where the Products were originally purchased. You may
be required to ship Products, at your expense, to the authorized service facility for the country where the Products
were purchased.
Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any
conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary
www.kodak.com/go/g600support 19
Appendix
adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option,
refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof
of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the
warranty.
If replacement parts are used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a
remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining
warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.
This warranty does not cover circumstances beyond Kodak’s control. This warranty does not apply when failure is
due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with
incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak’s operation,
maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or
claims made after the duration of this warranty.
Kodak makes no other express or implied warranty for this product, and disclaims the implied
warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of
any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the
purchase date or such longer period as required by law.
The option of repair, replacement, or refund is Kodak’s only obligation. Kodak will not be responsible for any
special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless
of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of
revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or
services, or claims of your customers for such damages resulting from the purchase, use, or failure of the
Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from state to state or by
jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different.
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty
or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.
FCC compliance and advisory
Kodak EasyShare G600 printer dock
20www.kodak.com/go/easysharecenter
Appendix
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the
equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the
receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Where shielded interface cables have been provided with the product
or specified additional components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.
Australian C-Tick
N137
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003.
Observation des normes-Class B—Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your
local authorities or go to www.kodak.com/go/recycle for recycling program information.