Kodak EasyShare
User’s guide
picture viewer
www.kodak.com
For interactive tutorials, www.kodak.com/go/howto
For help with your picture viewer, www.kodak.com/go/pictureviewersupport
Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2005
All screen images are simulated.
Kodak and EasyShare are trademarks of Eastman Kodak Company.
P/N 4J3340
Product views
10
Product features
3
2
1
4
5
6
7
9
8
11
1 LCD screen 6 Share button
2 Slot for optional SD or MMC card 7 Menu button
3 Power button 8 Charging indicator
4 OK button 9 USB port
5 10 EasyShare dock connector
11 Reset button
www.kodak.com/go/support
i
Table of contents 1
1 Setting up your picture viewer ..............................................................1
Install EasyShare software first ......................................................................1
Charging the battery with the included USB cable..........................................2
Loading pictures from your computer.............................................................3
2 Using your picture viewer ......................................................................4
Turning the picture viewer on/off...................................................................4
Viewing pictures ...........................................................................................4
Magnifying a picture .....................................................................................5
Viewing multi-up (thumbnails).......................................................................5
Understanding the icons................................................................................6
Checking the battery level .............................................................................6
Using the Menu button .................................................................................7
3 Doing more with your picture viewer ....................................................8
Viewing pictures from an SD or MMC card.....................................................8
Using an EasyShare printer dock or camera dock ...........................................9
Direct printing with a PictBridge enabled printer ..........................................10
Running a slide show..................................................................................11
Sharing your pictures...................................................................................13
4 Troubleshooting ..................................................................................15
Picture viewer problems ..............................................................................15
Computer/connectivity problems..................................................................16
Direct printing (PictBridge enabled printer) problems....................................17
ii www.kodak.com/go/support
Table of contents
5 Getting help ........................................................................................18
Helpful links................................................................................................18
Telephone customer support .......................................................................19
6 Appendix .............................................................................................20
Picture viewer specifications........................................................................20
Power-saving features.................................................................................20
Important safety instructions .......................................................................21
Additional care and maintenance ................................................................21
Warranty.....................................................................................................22
Regulatory compliance ................................................................................24
www.kodak.com/go/support
iii
1 Setting up your picture
viewer
Your EasyShare picture viewer lets you carry approximately 150 of your favorite
pictures, so you can share them with friends and family wherever you go!
Install EasyShare software first
IMPORTANT:
1 Close all software applications that are open on your computer (including
anti-virus software).
2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Load the software:
Windows OS—if the install window does not appear, choose Run from the Start
menu. Type d:\setup.exe where d is the drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install icon.
4 Follow the on-screen instructions to install the software.
Windows OS—select Complete to automatically install the most commonly used
applications. Select Custom to choose the applications.
Mac OS X—follow the on-screen instructions.
5 If prompted, restart the computer. If you turned off anti-virus software, turn it back
on. See the anti-virus software manual for details.
IMPORTANT:
Install Kodak EasyShare software before connecting the picture viewer to
your computer. Install the version that came with your picture viewer;
previous versions may not recognize the picture viewer.
When prompted, please register your picture viewer and software. To
register later, see
www.kodak.com/go/register.
1 www.kodak.com/go/support
Setting up your picture viewer
Charging the battery with the included USB cable
Your picture viewer has a built-in battery that charges when you connect it to your
computer. The battery charges only when the picture viewer is turned off.
Turn o n t he
1
computer.
Turn off the
2
picture viewer.
Connect the picture
3
viewer to the
computer with USB
cable (Model U-5A).
Charge up to 3.5 hours.
(Charging indicator stops blinking at full charge.)
To charge the battery Connect the picture viewer
Or view pictures To your computer via the USB cable (Model U-5A).
While viewing pictures To an optional Kodak EasyShare dock series 3 (page 9).
NOTE: Rechargeable batteries have a limited number of charging cycles. Battery life and number of charge
cycles vary by use and settings.
Other battery charging solutions may be available
IMPORTANT:
www.kodak.com/go/support
We recommend using only Kodak accessories to charge the battery.
Damage caused by unauthorized accessories is not covered under warranty.
www.kodak.com/go/picturevieweraccessories
See
.
2
Setting up your picture viewer
Loading pictures from your computer
When you connect the picture viewer to your computer, favorite pictures from
EasyShare software are loaded to the picture viewer.
Before connecting the picture viewer to your computer, ensure that you have selected
favorite pictures in EasyShare software. You can set up your EasyShare software to
load favorite pictures:
■ Automatically when the picture viewer is connected to the computer
■ Only when you choose
For more information, click the Help button in EasyShare software.
Press for 1 second
to turn on picture viewer.
NOTE: You can also view pictures from an SD or MMC card. (See page 8.)
Loading pictures from an EasyShare dock
You can also dock your picture viewer with a compatible EasyShare dock. (See page 8
for dock compatibility.)
3 www.kodak.com/go/support
2 Using your picture viewer
Turning the picture viewer on/off
Press for 1 second
to turn on/off.
Viewing pictures
View the previous/next
picture.
OK
Start/stop a slide show.
To view pictures on a television, see page 12.
www.kodak.com/go/support 4
Using your picture viewer
Magnifying a picture
Viewing multi-up (thumbnails)
Magnify the picture.
Pan a magnified picture.
Return to normal view.OK
View multi-up thumbnails.
Highlight a picture.
OK
5 www.kodak.com/go/support
View the highlighted
picture.
Using your picture viewer
Understanding the icons
Icons show you the status of your picture viewer or of individual pictures.
NOTE: Some icons are shown only in certain situations.
Tagge d
for prints
Scroll
arrows
Tagged
for email
Checking the battery level
Battery level icon Indicates
No icon The battery has enough power.
The battery needs charging soon.
The battery needs charging now.
Picture
number
Image
location
(card or the
picture
viewer’s
internal
memory)
Battery
level
www.kodak.com/go/support
6
Using your picture viewer
Using the Menu button
Use the picture viewer menus to choose settings and to perform actions.
1 To view the menu, press the Menu button.
2 Press to highlight a menu choice, then press the OK button.
3 If necessary, press to highlight additional choices, then press the OK button.
To turn off the menu anytime, press the Menu button again.
Main Menu Option
Begin Slide Show Choose interval, loop, transition.
Delete Picture Choose Picture, Exit, All Internal Pictures, All Card Pictures.
Magnify Choose 2X, 1X. (Also see page 5.)
Multi-up View up to 9 thumbnails at one time. (Also see page 5.)
Picture Info View filename, capture date/time, battery icon (if power is low).
Setup Menu Access additional settings.
To view Setup options, press the Menu button, then choose Setup Menu.
Setup Option
Return Return to the Main Menu.
Display Icons Choose Yes, No.
LCD Brightness Choose LCD brightness level.
Video Out Choose NTSC, PAL.
Language Choose language.
About View info about your picture viewer.
7 www.kodak.com/go/support
3 Doing more with your picture
viewer
Viewing pictures from an SD or MMC card
You can insert an SD or MMC card to view pictures. We recommend Kodak SD or
MMC cards. To purchase cards, see www.kodak.com/go/picturevieweraccessories.
CAUTION:
A card can only be inserted one way; forcing it may cause damage.
Notched corner
The picture viewer
can be on or off.
IMPORTANT:
www.kodak.com/go/support 8
Pictures on the card are viewable only while the card is inserted.
Doing more with your picture viewer
Using an EasyShare printer dock or camera dock
Dock your picture viewer with an EasyShare printer dock to print directly. Dock with
an EasyShare printer dock or camera dock to charge your battery or to run a slide
show. For accessories (including the dock adapter D-22), see
www.kodak.com/go/picturevieweraccessories.
Kodak EasyShare dock Docking configuration
■ series 3 printer docks and
camera docks
Custom dock insert
included with your picture
viewer
Dock
■ printer dock
■ printer dock plus
■ printer dock 6000
■ camera dock 6000
Custom dock insert
Kodak dock adapter D-22
Dock
■ printer dock 4000
■ camera dock II
■ LS420, LS443 camera dock
Not compatible
9 www.kodak.com/go/support
Doing more with your picture viewer
Direct printing with a PictBridge enabled printer
Your picture viewer features PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
■ Picture viewer with a fully charged battery
■ PictBridge enabled printer
■ USB cable (Model U-5A) included with
your picture viewer
Connecting to a PictBridge enabled printer
1 Turn off the picture viewer and the printer.
2 Connect the USB cable (Model U-5A) from the picture viewer to the printer.
Printing from a PictBridge enabled printer
1 Turn on the printer. Turn on the picture viewer.
The PictBridge screen is displayed, followed by the current picture and menu.
2 Press to choose a print option, then press the OK button.
Print option
Current Picture Press to choose a picture and the number of copies.
Tagged Pictures If your printer is capable, print tagged pictures; choose a print size.
Index Print Print thumbnails of all pictures. This requires one or more sheets of paper.
All Pictures Print all pictures in internal memory or on a card. Choose the number
of copies.
Disconnecting from a PictBridge enabled printer
1 Turn off the picture viewer and printer.
2 Disconnect the USB cable from the picture viewer and the printer.
www.kodak.com/go/support
10
Doing more with your picture viewer
Running a slide show
1 Press the OK button.
The slide show begins.
2 To stop the slide show, press the OK button.
Changing slide show settings
1 Press the Menu button.
2 Press to highlight Begin Slide Show, then press the OK button.
3 Press to highlight a slide show setting:
Slide show setting
Exit Then press the OK button.
Interval Press to select a display interval, then press the OK button.
Loop Press to select On or Off, then press the OK button.
Transition Press to select None, Fade Black, or Slide, then press the
OK button.
4 Highlight Begin Show, then press the OK button.
NOTE: Slide show settings remain until you change them.
11 www.kodak.com/go/support
Doing more with your picture viewer
Viewing pictures on a television
1 Dock the picture viewer on an EasyShare printer dock or camera dock series 3
(page 9).
2 Connect the dock to a television using an A/V cable. (To purchase accessories, see
www.kodak.com/go/picturevieweraccessories. Ensure that the television is set to
the “Video” setting. See your television user guide.)
www.kodak.com/go/support
12
Doing more with your picture viewer
Sharing your pictures
Use the Share button to “tag” a picture for printing or emailing. Then, when you
connect your picture viewer to your computer (or dock it with an EasyShare camera
dock or printer dock), printing and emailing are easy!
For details on Share features, click the Help button in the EasyShare software.
Tagging pictures for printing
First—tag pictures on your picture viewer
1 Press the Share button. Press to locate a picture.
2 Press to highlight Print , then press the OK button.*
3 Press to select the number of copies (0-99). Zero removes the tag for that
picture.
The Print icon appears in the status area of the picture. The default quantity is one.
4Optional: You can apply a print quantity to other pictures. Press to locate a
picture. Keep the print quantity as is, or press to change it. Repeat this step
until the desired print quantity is applied to the pictures.
5 Press the OK button. Then press the Share button to exit the menu.
* To tag all pictures in the storage location (in the picture viewer’s internal memory or
on a picture card), highlight Print All, press the OK button, then indicate the number
of copies. To remove print tagging for all pictures in the storage location, highlight
Cancel Prints, then press the OK button.
Second—transfer print tagged pictures
When you transfer the tagged pictures to your computer, the print screen opens. For
details, click the Help button in EasyShare software.
For more information on printing from your computer, printer dock, PictBridge
enabled printer, or card, see page 9.
13 www.kodak.com/go/support
Doing more with your picture viewer
Tagging pictures for emailing
First—on your computer
Use EasyShare software to create an email address book on your computer. Then,
copy up to 32 email addresses to the picture viewer’s internal memory. For details,
click the Help button in EasyShare software.
Second—tag pictures on your picture viewer
1 Press the Share button. Press to locate a picture.
2 Press to highlight Email , then press the OK button.
The Email icon appears in the status area of the picture.
3 Press to highlight an email address, then press the OK button.
To tag other pictures with the same address, press to scroll through them.
When the picture you want is displayed, press OK.
To send the pictures to more than one address, repeat step 3 for each address.
Selected addresses are checked.
4 To remove a selection, highlight a checked address and press the OK button. To
remove all email selections, highlight Clear All.
5 Press to highlight Exit, then press the OK button.
6 Press the Share button to exit the menu.
Third—transfer and email
When you transfer the tagged pictures to your computer, the Email screen opens and
lets you send to the addresses specified. For details, click the Help button in the
EasyShare software.
www.kodak.com/go/support
14
4 Troubleshooting
NOTE: For the latest information on this product, see
Picture viewer problems
Status Solution
Picture viewer does not
turn on or off.
Picture viewer buttons and
controls do not function.
Memory card not recognized
or picture viewer freezes
with card.
Slide show does not start.
No picture on a television.
Picture does not fill the
picture viewer screen.
■ Connect the picture viewer to your computer to charge the
battery or to use the power from the computer (page 2).
■ Connect the picture viewer to an EasyShare dock (page 9).
■ Use the end of a paper clip to press and hold the Reset
button (page i) for at least 1 second.
■ Contact Customer Support (page 19).
■ Ensure that the file formats on the picture card are JPEG.
■ Use another memory card.
■ Ensure that the file formats on the picture card are JPEG.
■ If viewing pictures from a memory card, ensure that it is
properly inserted (page 8).
■ If using an EasyShare dock, press the TV button on the dock.
■ Ensure that the television is set to the “Video” setting. (See
your television user guide.)
■ Adjust the picture viewer Video Out setting (NTSC or PAL
page 7).
If the camera that captured the image has a different aspect ratio
than the picture viewer screen, black bars may appear at the top
and bottom of a picture; this is normal.
www.kodak.com/go/pictureviewersupport
.
15 www.kodak.com/go/support
Computer/connectivity problems
Status Solution
Computer does not
communicate with
the picture viewer.
Pictures do not transfer to
the computer.
A slide show does not run
on an external video device.
You cannot add pictures to
the picture viewer.
■ Turn on the picture viewer.
■ Ensure that the USB cable (Model U-5A) is connected from
the picture viewer to the computer port (page 3). If using an
EasyShare dock, check all cable connections. Ensure that the
picture viewer is seated on the dock.
■ Ensure that the latest version of EasyShare software is
installed and running (page 1).
■ Click the Help button in EasyShare software.
■ Adjust the picture viewer Video Out setting (NTSC or PAL
page 7).
■ If using an EasyShare dock, press the TV button on the dock.
■ Ensure that the external device settings are correct (see the
device’s user’s guide). For Windows OS-based computers,
check device manager and USB serial bus controllers for
conflicts. Restart the computer. (For more information about
the Windows OS, see www.kodak.com/go/pcbasics.)
■ If there is not enough room in the picture viewer’s internal
memory for all favorite pictures, the most recent favorites
are transferred from the computer to the picture viewer.
■ Click the Help button in EasyShare software.
Troubleshooting
www.kodak.com/go/support
16
Troubleshooting
Direct printing (PictBridge enabled printer)
problems
Status Solution
You cannot locate the
desired picture.
The Direct print menu turns
off.
You cannot print pictures.
The picture viewer or the
printer displays an error
message.
■ Turn on the picture viewer.
■ Ensure that the file formats on the picture card are JPEG.
Press any button to redisplay the menu.
■ Ensure that the picture viewer and the printer are connected
(page 3).
■ Ensure that the printer and picture viewer have power.
■ Ensure that the printer has paper and displays no error
messages.
Follow the prompts to resolve the issue.
17 www.kodak.com/go/support
5 Getting help
Helpful links
Picture viewer
Get support for your product (FAQs,
troubleshooting information, arrange for
repairs, etc.)
Purchase picture viewer accessories (camera
docks, printer docks, cards, etc.)
Download the latest picture viewer
firmware and software
www.kodak.com/go/pictureviewersupport
www.kodak.com/go/picturevieweraccessories
www.kodak.com/go/pictureviewerdownloads
Software
Get information on EasyShare software www.kodak.com/go/easysharesw
(or click the Help button in EasyShare software)
Get help with the Windows operating
system and working with digital pictures
www.kodak.com/go/pcbasics
Other
Get information on EasyShare printer docks www.kodak.com/go/printerdocks
Optimize your printer for true, vibrant colors www.kodak.com/go/onetouch
Register your picture viewer www.kodak.com/go/register
www.kodak.com/go/support 18
Getting help
Telephone customer support
If you have questions concerning this product, you may speak with a customer
support representative:
Australia 1800 147 701 Netherlands 020 346 9372
Austria 0179 567 357 New Zealand 0800 440 786
Belgium 02 713 14 45 Norway 23 16 21 33
Brazil 0800 150000 Philippines 1 800 1 888 9600
Canada 1 800 465 6325
China 800 820 6027 Portugal 021 415 4125
Denmark 3 848 71 30 Singapore 800 6363 036
Ireland 01 407 3054 Spain 91 749 76 53
Finland 0800 1 17056 Sweden 08 587 704 21
France 01 55 1740 77 Switzerland 01 838 53 51
Germany 069 5007 0035 Taiwan 0800 096 868
Greece
Hong Kong 800 901 514
India 91 22 617 5823 United Kingdom 0870 243 0270
Italy 02 696 33452 United States 1 800 235 6325
Japan 03 5540 9002 Outside the US 585 726 7260
Korea 00798 631 0024 International Toll Line +44 131 458 6714
00800 44140775
Poland 00800 4411625
Thailand 001 800 631 0017
Turkey 00800 448827073
International Toll Fax +44 131 458 6962
For the most up-to-date listings, visit:
www.kodak.com/US/en/digital/contacts/DAIInternationalContacts.shtml
19 www.kodak.com/go/support
6 Appendix
Picture viewer specifications
For more specifications, visit www.kodak.com/go/pictureviewersupport.
Color display—2.5-inch (63.5 mm) transmissive display; 882 x 228 (201 K) pixels
Image file format—EXIF 2.2.1 (JPEG compression); file organization DCF
Image storage—32 MB internal memory; optional MMC or SD Card (The
SD logo is a trademark of the SD Card Association.)
Video output—NTSC or PAL
Power—Built-in Li-ion battery (not user-replaceable), rechargeable via USB cable
(Model U-5A); EasyShare camera or printer dock series 3.
Communication with computer—USB 2.0 (PIMA 15740 protocol). Compatible
with USB 1.0.
PictBridge support—Yes
Size—3.4 in. (87 mm) x 2.3 in. (58 mm) x 0.5 in. (12 mm)
Weight—2.4 oz (68 g) without card
Power-saving features
If no action for The picture viewer To turn it back on
1 minute LCD turns off. Press the OK button.
4 minutes Turns off. Press the power button.
www.kodak.com/go/support 20
Appendix
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. Do not expose this
product to liquid, moisture, or extreme temperatures. Kodak AC adapters
and battery chargers are intended for indoor use only. The use of
controls, adjustments, or procedures other than those specified herein
may result in exposure to shock and/or electrical or mechanical hazards.
Using this product
■ Read and follow these instructions before using Kodak products. Always follow
basic safety procedures.
■ The use of an accessory attachment that is not recommended by Kodak, such as
an AC adapter, may cause fire, electric shock, or injury.
■ If using this product in an airplane, observe all instructions of the airline.
Additional care and maintenance
■ If the picture viewer has been subjected to inclement weather or you suspect
water has gotten inside the picture viewer, turn it off. Allow all components to
air-dry for at least 24 hours before using the picture viewer again.
■ Blow gently on the picture viewer screen to remove dust and dirt. Wipe gently with
a soft, lint-free cloth or an untreated lens cleaning tissue. Do not use cleaning
solutions unless designed specifically for the picture viewer. Do not allow
chemicals, such as suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■ For disposal or recycling information, contact your local authorities. In the US, visit
the Electronics Industry Alliance Web site at www.eiae.org or the Kodak Web site
at www.kodak.com/go/pictureviewersupport.
21 www.kodak.com/go/support
Appendix
Warranty
Limited warranty
Kodak warrants Kodak EasyShare picture viewers and accessories (excluding
batteries) to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase.
Retain the original dated sales receipt. Proof of the date of purchase will be required
with any request for warranty repair.
Limited warranty coverage
This limited warranty will be honored only within the geographical
location that the product was purchased.
Kodak will REPAIR or REPLACE Kodak EasyShare picture viewers and accessories if
they fail to function properly during the warranty period, subject to any conditions
and/or limitations stated herein. Such repair service will include all labor as well as
any necessary adjustments and/or replacement parts. Such repair or replacement is
the sole remedy under this warranty.
If replacement parts are used in making repairs, these parts may be remanufactured,
or may contain remanufactured materials. If it is necessary to replace the entire
product, it may be replaced with a remanufactured product.
Limitations
Request for Warranty service will not be accepted without proof of date of purchase,
such as a copy of the original dated Kodak EasyShare digital picture viewer or
accessory sales receipt. (Always keep the original for your records.)
This warranty does not apply to the battery(s) used in picture viewers or accessories.
This warranty does not cover circumstances beyond Kodak’s control, nor problems
caused by failure to follow the operating instructions in the Kodak EasyShare picture
viewers and accessories User’s Guides.
THIS WARRANTY DOES NOT APPLY WHEN FAILURE IS DUE TO SHIPPING DAMAGE,
www.kodak.com/go/support
22
Appendix
ACCIDENT, ALTERATION, MODIFICATION, UNAUTHORIZED SERVICE, MISUSE,
ABUSE, USE WITH INCOMPATIBLE ACCESSORIES OR ATTACHMENTS, FAILURE TO
FOLLOW KODAK’S OPERATION, MAINTENANCE OR REPACKING INSTRUCTIONS,
FAILURE TO USE ITEMS SUPPLIED BY KODAK (SUCH AS ADAPTERS AND CABLES),
OR CLAIMS MADE AFTER THE DURATION OF THIS WARRANTY.
Kodak makes no other express or implied warranty for this product. In the event that
the exclusion of any implied warranty is ineffective under the law, the duration of the
implied warranty will be one year from the purchase date.
The option of replacement is Kodak’s only obligation. Kodak will not be responsible
for any special, consequential or incidental damages resulting from the sale,
purchase, or use of this product, regardless of the cause. Liability for any special,
consequential or incidental damages (including but not limited to loss of revenue or
profit, downtime costs, loss of the use of the equipment, cost of substitute
equipment, facilities or services, or claims of your customers for such damages
resulting from the purchase, use or failure of the product), regardless of cause or for
breach of any written or implied warranty is expressly disclaimed and excluded
herefrom.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from
state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
23 www.kodak.com/go/support
Appendix
be by negligence or other act.
Regulatory compliance
FCC compliance and advisory
Kodak EasyShare picture viewer
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: 1) reorient
or relocate the receiving antenna; 2) increase the separation between the equipment
and the receiver; 3) connect the equipment to an outlet on a circuit different from that
to which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
www.kodak.com/go/support
24
Appendix
Observation des normes-Class B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard the product as municipal waste. Contact
your local authorities or go to www.kodak.com for recycling program
information.
VCCI Class B ITE
English translation:
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a
radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
MPEG-4
Use of this product in any manner that complies with the MPEG-4 visual standard is
prohibited, except for use by a consumer engaging in personal and non-commercial
activities.
25 www.kodak.com/go/support
Index 1
A
accessories
buy, 18
camera, printer dock, 9
auto power-down, 20
B
battery
charge, 2
level, 6
C
camera and printer dock, 9
Canadian compliance, 24
charge battery, 2
clean, 21
customer support, 19
D
display slide show, 11
disposal, recycling, 21
dock, camera and printer, 9
E
EasyShare software, install, 1
email pictures, 14
F
FCC compliance, 24
H
help, web links, 18
I
icons, 6
install software, 1
K
Kodak web sites, 18
L
LCD screen, 4
load
pictures, 3
software, 1
M
Macintosh, install software on, 1
Macintosh, installing software on, 1
magnify a picture, 5
maintenance, 21
memory card, 8
MMC/SD card, 8
multi-up, thumbnail view, 5
P
PictBridge enabled printer, 10
picture card, 8
pictures
email tagged, 14
print tagged, 13
view magnified, 5
view multi-up thumbnails, 5
view single, 4
view slide show, 11
www.kodak.com/go/support 26
Index
power, 4
auto off, 20
print
optimizing printer, 18
PictBridge, 10
with EasyShare printer dock, 9
printer, camera dock, 9
R
recycling, disposal, 21
regulatory information, 24
repair, 18
run a slide show, 11
S
SD/MMC card, 8
service and support telephone
numbers, 19
share pictures
email, 14
print, 13
shutoff, auto, 20
sleep mode, 20
slide show
problems, 16
run, 11
run on a television, 12
software, install, 1
specifications, 20
support, technical, 19
telephone support, 19
thumbnail, multi-up view, 5
tips, care, and maintenance, 21
transfer pictures, 3
turn on and off, 4
U
understand icons, 6
URLs, Kodak web sites, 18
USB port, i
V
VCCI compliance, 25
view pictures
magnified, 5
on a television, 12
single pictures, 4
slide show, 11
thumbnails, 5
W
warranty, 22
Windows computers
installing software, 1
Windows OS-based computer, install
software on, 1
T
tag pictures
for email, 14
for print, 13
27 www.kodak.com/go/support
Loading...