Kodak 8461444 - Max Flash Camera One Time Use, Zoom One-Time-Use Setup Manual

CIS-256
June 2004

CURRENT INFORMATION SUMMARY

Opening Instructions for the

KODAK Zoom One-Time-Use Camera

Wear eye protection when opening all cameras.

Wind Off

1

0

• Make sure “0” is aligned with the arrow in the
frame-counter window .

• If the “0” is not aligned, grip the camera and
cover the lens.Then press the
and turn the
until the film is fully rewound).
The film is fully rew ound when the

wheel

thumbwheel

rotates freely and does not stop or lock.

Break Off Film Door

shutter button

thumbwheel

shutter button

(repeat these steps

thumb-

3

Insert T ool

2

• Insert the special tool into the end slot.

Remove Film

4

• Using the special tool, hold the camera firmly
and pull upwards to break off the film door
and to remove the film.

• Place the used camera in the
Kodak recycle bin.

5

• Visit our Web site at

www.kodak.com/go/kes

about Kodak’ s recycling program.

• Call Kodak’ s adv ertising distribution
center at [phone] to order
a Kodak hand-opening tool.

http://

for details

Opened camera
with film removed.

Exposed
Film

CAUTION: Before y ou attempt the
opening tasks, make sure the tool is
fully engaged with the camera body to
prevent tool slippage.

CAUTION: This camera body contains
a high-voltage capacitor and circuit
board. T o avoid electric shock, do not
pry apart the front and back sections
of the camera. Remove only the film
from its respective compartment. If
sections of the camera are separated,
do not touch the circuit board.

© Eastman Kodak Company, 2004

Current Information Summaries pro vide information of limited or specif ic

application. Responsibility for judging the timeliness and applicability of the

information to a specific photographic use rests with the end user.

CIS-256, Opening Instructions for the
KOD AK Zoom One-T ime-Use Camera K odak is a trademark. New 6-04

Consumer Imaging

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650