Kodak 5000 Series Cartidge Instructions

Installing a New Printhead in Your KODAK 5000 Series All-in-One Printer

a) Follow these instructions for
step-by-step guidance on how to
remove and replace your printhead

.

b) If your printer is not
powered on, press
Start.

c) Lift the printer access door and wait for the carriage
to move to the access position.

d) Remove any paper that
may be loaded in the
printer.

a) Remove both ink cartridges and
set them aside.

b) Unlatch the used printhead. Press the button on the
left, as shown.

c) Lift the used printhead out of the
carriage.

Remove Ink Cartridges and Used Printhead

2

1

1

10

Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Eastman Kodak Company, 2009
MC/MR/TM: Kodak.

Start

a) Remove the printhead from its bag.

IMPORTANT: Complete steps b

through d immediately after opening
sealed bag.

b) Remove the 3 plastic protective shields. c) Place the printhead into the carriage.

Insert at the angle shown.

d) Push firmly against the back wall of the
printhead until you hear a loud snap.

a) Insert the black ink cartridge into the
printhead.

b) Press down on the ink cartridge until you
hear it click into position.

c) Repeat steps 4a-4b for the color ink
cartridge. Close the printer access door.

www.kodak.com/go/aiosupport

Insert New Printhead

Re-Insert the Ink Cartridges

4

2

10

Black Ink Cartridge

10

10

Black Ink Cartridge

Color Ink Cartridge

10

3