All batteries lose power over time–even if
they’re not being used. For longer life, fully
charge the battery prior to use.
Attaching the strap
Loading the KLIC-7006 battery
Purchase extra batteries www.kodak.com/go/accessories
Charge the battery See page 2
Watch the battery levelSee page 9
1www.kodak.com/go/support
Charging the battery
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Turn off the camera.
1
Connect the KODAK Camera USB Cable, Micro B / 5-Pin and
charger. (Use only the cable included with this camera.)
2
NOTE: You can use the camera while it’s plugged in.
Your ada p t e r
may differ.
If your package includedThen see
An in-camera battery charger Using the in-camera battery charger
An external battery charger Using the external battery charger
Using the in-camera battery charger
You can charge the Li-Ion battery whenever necessary.
Setting up your camera
Purchase extra batteries www.kodak.com/go/accessories
Watch the battery levelSee page 9
www.kodak.com/go/support
2
Setting up your camera
Battery Charging light:
• Orange: charging
• Green: finished charging
Your plug
may differ.
If you have this charger...
Battery Charging light:
• Flashing green: charging
• Steady On green: finished charging
Your plug
may differ.
If you have this charger...
Using the external battery charger
You can charge the Li-Ion battery whenever necessary.
Purchase extra batteries www.kodak.com/go/accessories
Watch the battery levelSee page 9
3www.kodak.com/go/support
Charge via your computer’s USB port
Battery Charging light:
• Blinking: charging
• Steady: finished charging
Turn off the camera.
1
Connect the KODAK Camera USB Cable,
Micro B / 5-Pin and charger. Use only the
cable included with this camera.
2
You can charge the Li-Ion battery whenever necessary.
IMPORTANT:
The camera charges when the computer is on and awake. Turn off the
computer’s hibernation, sleep, and standby modes.
Purchase extra batteries www.kodak.com/go/accessories
Watch the battery levelSee page 9
Setting up your camera
www.kodak.com/go/support
4
Setting up your camera
Press the Power button.
to change current field.
for previous/next field.
OK
to accept.
At the prompt, press
OK.
to change.
OK
to accept.
Language:
Date/Time:
Turning on the camera
Setting the language and date/time
NOTE: To change language in the future, use the Setup Menu (see page 36).
5www.kodak.com/go/support
Setting up your camera
CAUTION:
1
Turn off the camera.
2
Insert the card until it clicks.
3
Turn on the camera.
To eject the card, push and release it.
SD/SDHC Card
(Accessory)
Storing pictures on an accessory SD or SDHC Card
Your camera has internal memory. We strongly recommend purchasing an SD
or SDHC Card to conveniently store more pictures/videos.
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card while the camera is on may
damage the pictures, the card, or the camera.
IMPORTANT:
When you turn on the camera, it checks to see if a card is inserted. If so,
new pictures/videos are stored on the card. If no card is inserted, new
pictures/videos are stored in the camera’s internal memory. If
pictures/videos are detected in internal memory and a card is inserted, the
camera prompts you to move the pictures to the card (and erase those in
internal memory).
Purchase cards www.kodak.com/go/accessories
www.kodak.com/go/support
6
2Taking pictures/videos
Framing marks
Taking pictures
1 The camera turns on in Smart Capture mode.
(If it’s in a different mode, press the Mode button,
then until the LCD displays Smart Capture
mode , then press OK.)
2 Compose the picture. Press the Shutter button
halfway to focus and set exposure.
If the framing marks are not focused on the desired
subject, release the Shutter button and recompose the
scene.
3 Press the Shutter button completely down.
7www.kodak.com/go/support
Taking pictures/videos
Delete the current picture/video
OK
Play/pause a video
Adjust the volume
While a picture/video is displayed, you may:
Taking a video
1 Press the Mode button.
2 Press until the LCD displays Video ,
then press OK.
3 To take a video, press the Shutter button
completely down, then release it.
To stop recording, press and release the Shutter button
again. To review and work with videos, see page 23.
Reviewing the picture/video just taken
After you take a picture/video, the LCD briefly displays a quickview—the picture just
taken or the first frame of a video.
To dismiss a quickview, press the Shutter button halfway.
To review pictures/videos anytime, see page 23.
www.kodak.com/go/support
8
Taking pictures/videos
Battery level
Capture mode
Pictures/time remaining
Zoom indicator
Self timer
Flash mode
Focus mode
Exposure compensation
Understanding the picture-taking icons
Watch the battery level
Don’t miss out on great pictures and videos—keep your battery fully charged.
Full
Three quarters
Half
Critical
AC Power
Charge the battery see page 2
Purchase extra batterieswww.kodak.com/go/accessories
9www.kodak.com/go/support
Taking pictures/videos
Using the optical zoom
1 Use the LCD to frame your subject.
2 To zoom in, press Telephoto (T).
To zoom out, press Wide Angle (W).
3 Take the picture or video.
NOTE: For focus distances, see Specifications starting on page 46.
Using digital zoom
Use digital zoom to get up to 5X magnification beyond optical zoom. (Digital zoom is
not available in Smart Capture mode.) Press Telephoto (T) until the slider on the LCD
is at the end of the optical zoom range. Release Telephoto (T), then press it again.
NOTE: You may notice decreased image quality when using digital zoom.
Adjusting LCD brightness
You can adjust the LCD brightness for your environment or to conserve battery power,
see see page 37.
www.kodak.com/go/support
10
Taking pictures/videos
Flash button
Using the flash
Press the Flash button repeatedly until the LCD displays the desired flash mode.
Flash modesFlash fires
AutoWhen the lighting conditions require it.
Fill (Flash On)Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit”
(when the light is behind the subject).
OffNever
Red-eye
Reduction
A preflash fires, shrinking the eye pupil, before the picture is
taken.
11www.kodak.com/go/support
Taking pictures/videos
Mode button
SCN
P
Using different modes
Press the Mode button, then until the LCD displays the mode that best suits
your subjects and surroundings, then press OK.
Use this modeFor
Smart
Capture
Scene
Program
Video
General picture taking—it offers excellent image quality and ease
of use.
■ Faces get focus and exposure priority.
■ The scene is analyzed for other content and for lighting.
You can choose the best picture size and aspect ratio for your
needs—just press the Menu button and choose Picture Size.
Point-and-shoot simplicity when taking pictures in practically any
situation. (See page 13.)
Advanced picture-taking—gives access to more manual settings
than Smart Capture. (See page 14.)
Capturing video with sound. (See page 8.)
www.kodak.com/go/support
12
Taking pictures/videos
Using Scene (SCN) modes
Choose a Scene mode—for great pictures in practically any situation.
1 Press the Mode button, then until the LCD displays SCN, then press OK.
2 Press to choose a mode and read its description.
3 Press OK to enter that Scene mode.
The camera is now in the scene mode that you chose.
SCN mode For
PortraitFull-frame portraits of people.
SportAction pictures.
LandscapeDistant scenes.
Close-upClose range. Use available light instead of flash, if possible.
SunsetSubjects at dusk or dawn.
BacklightSubjects that are in shadow or “backlit.”
Candle
Light
ChildrenAction pictures of children in bright light.
BrightBright scenes.
FireworksFireworks. For best results, place the camera on a steady surface or tripod.
Self Portrait Close-ups of yourself. Assures proper focus and minimizes red eye.
Night
Portrait
Night
Landscape
High ISOPeople indoors, in low-light scenes.
Panorama
L-R, R-L
Subjects illuminated by candle light.
Reduces red eye of people in night scenes or low-light conditions.
Distant scenery at night. Flash does not fire.
“Stitching” 2 or 3 pictures into 1 panoramic scene. (See page 17.)
13www.kodak.com/go/support
Taking pictures/videos
Program mode settings
SCN mode For
Blur
Reduction
Reducing blur caused by camera shake or subject motion.
Using Program mode
Program mode gives access to these settings:
SettingDescription
Exposure
Compensation
Self-timer/Burst Include yourself in a picture (page 16). Burst takes a series of
Focus ModeChoose Auto, Macro (for close-ups), or Infinity.
1 Press the Mode button .
2 Press to choose P (Program) mode, then press OK.
3 Press to choose a setting.
4 Press to change a setting, then press OK to save it.
Adjust the exposure. If a scene is too light, decrease the setting;
if it’s dark, increase the setting.
pictures in rapid succession.
www.kodak.com/go/support
14
Loading...
+ 47 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.