urg_00732.book Page 1 Tuesday, October 9, 2007 6:27 AM
Installing the software
Before connecting any cables, install the software that was
included with your camera. Follow the on-screen instructions.
After installing the software, return to this
user guide.
Loading the batteries
ENGLISH
Ni-MH
(rechargeable)
www.kodak.com/go/z1275support or z1285support1
CRV3 lithium
(non-rechargeable)
2 AA (rechargeable or
non-rechargeable)
Page 2
urg_00732.book Page 2 Tuesday, October 9, 2007 6:27 AM
ENGLISH
Turning on the camera
Setting the language, date/time
Language:
to change.
OK
Date/Time:
OK
2www.kodak.com/go/easysharecenter
to accept.
to change.
for previous/next field.
to accept.
Page 3
urg_00732.book Page 3 Tuesday, October 9, 2007 6:27 AM
Taking a picture/video
PicturesVideos
1
1
ENGLISH
22
Ready
light
Press the Shutter button halfway to
3
Framing
marks
focus and set exposure.
When the Ready light turns green,
press the Shutter button
completely down.
www.kodak.com/go/z1275support or z1285support3
Press the Shutter button
3
completely down and release.
To stop recording, press and
release the Shutter button
again.
Page 4
urg_00732.book Page 4 Tuesday, October 9, 2007 6:27 AM
ENGLISH
Reviewing pictures/videos
1
Press Review. (Press again to exit.)
2
Videos:
Review
for previous/next picture/video.
Play
OK
Pause/unpause
Adjust the volume
2X, 4X forward
2X, 4X reverse
Playing HD on your television
For a true HDTV experience on your television, dock your camera on the
optional Kodak EasyShare HDTV dock. Visit www.kodak.com/go/hdtvdock
4www.kodak.com/go/easysharecenter
Page 5
urg_00732.book Page 5 Tuesday, October 9, 2007 6:27 AM
Transferring pictures/videos
USB cable
1
Turn off camera.
2
Connect USB cable.
3
Turn on camera.
Kodak EasyShare software opens on your computer
and prompts you through the transfer process.
Kodak EasyShare printer
dock or camera dock
(May be sold separately.)
For dock compatibility, visit
www.kodak.com/go/dockcompatibility.
To purchase accessories, visit
www.kodak.com/go/z1275accessories
or z1285accessories.
To use an EasyShare dock, see its
user documentation.
ENGLISH
www.kodak.com/go/z1275support or z1285support5
USB
cable
U-8
Page 6
urg_00732.book Page 6 Tuesday, October 9, 2007 6:27 AM
ENGLISH
Keep learning about your camera!
Congratulations!
You have:
• set up your camera
• taken pictures
• transferred pictures to your computer
Keep learning!
Finish reading this book, so you can take and share your best pictures!
Visit www.kodak.com/go/z1275support or Z1285support and
www.kodak.com/go/easysharecenter for:
• the extended user guide
• interactive troubleshooting and repairs
• interactive tutorials
• FAQs
• downloads
• accessories
• printing information
• product registration
6www.kodak.com/go/easysharecenter
Page 7
urg_00732.book Page 7 Tuesday, October 9, 2007 6:27 AM
Front view
1
2
3
ENGLISH
4
5
6
7
8
9
10
1Mode dial6Self-timer/Burst button
2Shutter button7Flash
3Self-timer/Video light8Speaker
4On/Off button9Microphone
5Flash button10Lens
www.kodak.com/go/z1275support or z1285support7
Page 8
urg_00732.book Page 8 Tuesday, October 9, 2007 6:27 AM
ENGLISH
Back view
2
76543
1
8
9
17
16
14
15
1 LCD10USB, A/V Out
2 OK/11DC-In, for optional 3V AC adapter
3 Ready light12Share button
13
12
10
11
4 LCD/Info button 13Menu button
5 Delete button14Review button
6 Wide angle (W) button15Battery compartment
7 Telephoto (T) button16Tripod socket
8 Strap post17Dock connector
9 Slot for optional SD/SDHC or MMC card
8www.kodak.com/go/easysharecenter
Page 9
urg_00732.book Page 9 Tuesday, October 9, 2007 6:27 AM
1Taking better pictures/videos
Capture modes
Choose the mode that best suits
your subjects and surroundings.
Capture modeFor
General picture taking. When the Shutter button is pressed halfway,
Smart Scene
faces are detected, the scene is analyzed, and the best settings are
applied.
P/M
SCN
P, MProgram, Manual modes for more creative control. (See page 19).
High ISO
ISO
Digital
Image
Stabilization
Scene
Video
Favorites
People in low-light scenes indoors using a higher ISO.
Minimizing the effects of camera shake and subject movement.
Point-and-shoot simplicity when taking pictures under special
conditions.
Capturing video with sound. (See page 3.)
Viewing favorite pictures.
www.kodak.com/go/z1275support or z1285support 9
Page 10
urg_00732.book Page 10 Tuesday, October 9, 2007 6:27 AM
Taking better pictures/videos
Using optical zoom
Use optical zoom to get up to 5X closer to your subject while taking pictures/videos.
Optical zoom is effective when the lens is no closer than 24 in. (60 cm) to the subject or
7.9 in. (20 cm) in Close-up mode.
1Press Telephoto (T) to zoom in. Press Wide Angle (W)
Zoom indicator
Optical
zoom
range
Digital
zoom
range
to zoom out.
The zoom indicator shows zoom status.
2Take the picture or video.
WTD
Using digital zoom
Use digital zoom to get up to 5X beyond optical zoom while taking pictures. Press
Telephoto (T) to the maximum optical zoom. Release the button, then press it again.
NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator
turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
10www.kodak.com/go/easysharecenter
Page 11
urg_00732.book Page 11 Tuesday, October 9, 2007 6:27 AM
Taking better pictures/videos
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash modesFlash fires
Auto When the lighting conditions require it.
Every time you take a picture, regardless of the lighting conditions. Use when
Fill
Red-eye
the subject is in shadow or is “backlit” (when the light is behind the subject).
In low light, hold the camera steady or use a tripod.
If Red-eye Pre-flash is turned off:
The flash fires once and the
camera automatically corrects
red-eye in the picture.
Press the
through flash modes. (See flash modes below.)
button repeatedly to scroll
If Red-eye Pre-flash is turned on:
The flash fires once so the eyes become
accustomed to the flash, then fires again
when the picture is taken.
OffNever.
Flash-to-subject distance
Wide angle: 2–19.3 ft (0.6–5.9 m) @ ISO 400
Telephoto: 2–10.5 ft (0.6–3.2 m) @ ISO 400
www.kodak.com/go/z1275support or z1285support 11
Page 12
urg_00732.book Page 12 Tuesday, October 9, 2007 6:27 AM
Taking better pictures/videos
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
Place camera on a tripod or flat surface.
1
In most Still modes, press the Self-Timer/Burst button
2
• Once for a 10-second delay (so you have time to get into the scene)
• Again for a 2-second delay (for a steady, auto-shutter release on a tripod)
• Again for 2-shot (one picture taken after 10 seconds and another picture
taken 8 seconds later)
Compose the scene.
3
Press the Shutter button halfway, then
4
completely down.
The picture is taken after the delay.
:
To cancel the Self-timer before the picture is taken, press the Self-timer/Burst button
, or press the Shutter button completely down.
Use the same procedure to use the self-timer in Video mode, but:
■ Turn the Mode dial to Video .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
12www.kodak.com/go/easysharecenter
Page 13
urg_00732.book Page 13 Tuesday, October 9, 2007 6:27 AM
Taking better pictures/videos
Understanding the picture-taking icons
Status icons indicate mode, feature, and camera status.
Self-timer/Burst
Flash
Date stamp
Camera mode
Album name
Framing marks
Picture size
Pictures/time remaining
Storage location
Zoom indicator
Low battery
Focus zone
Exposure metering
White balance
Histogram
Focus mode
ISO speed
P/M mode
Aperture
Shutter speed
Exposure compensation
www.kodak.com/go/z1275support or z1285support 13
Page 14
urg_00732.book Page 14 Tuesday, October 9, 2007 6:27 AM
2Working with pictures/videos
Deleting pictures/videos
1Press the Review button.
2Press to find a picture/video.
3Press the Delete button.
4Follow the screen prompts.
Using the undo delete feature
If you accidentally delete a picture/video, use Undo Delete to retrieve it. This feature is
available only immediately after you delete a picture/video in Review mode (when the
Undo Delete option appears).
1Press to highlight Undo Delete.
2Press OK.
The deleted picture/video appears.
3Select Exit to exit the Delete menu.
14www.kodak.com/go/easysharecenter
Page 15
urg_00732.book Page 15 Tuesday, October 9, 2007 6:27 AM
Working with pictures/videos
Using the menu button in Review
1Press the Review button, then the Menu button.
2Press to choose a tab:
■Review to view pictures/videos
■Edit to edit pictures/videos
■Setup for other camera settings
3Press to highlight a setting, then press the OK button.
4Choose an option, then press the OK button.
OptionsOptions
View By
AlbumCrop
Slide ShowSound Tags
Multi-up
Copy ToTrim
Protect/UnprotectAction Print
Select/Deselect AllBookmark
Pictures
Videos
Perfect Touch tech.
Make Picture
www.kodak.com/go/z1275support or z1285support 15
Page 16
urg_00732.book Page 16 Tuesday, October 9, 2007 6:27 AM
Working with pictures/videos
Adding sound tags
You can record a voice or sound (up to 1 minute long) to a picture.
NOTE:
Only one sound tag can be added to each picture (not to videos).
Recording a sound tag
1Press the Review button, then to find a picture.
2Press the Menu button, then to highlight the Edit tab.
3Press to highlight Sound Tag. Press the OK button.
4Choose Record, then press OK.
5Follow the screen prompts.
The sound tag is applied to your picture.
■Press the Menu button to exit the menu.
Playing a sound tag
1Press the Review button, then to find a
tagged picture.
Review
16www.kodak.com/go/easysharecenter
2Press to play the sound tag.
3Press to adjust the volume.
4Press OK to stop playback.
Page 17
urg_00732.book Page 17 Tuesday, October 9, 2007 6:27 AM
Understanding the review icons
Pictures
Working with pictures/videos
Favorite tag
Email tag
Kodak Perfect Touch
tech.
Review mode
Album name
Sound tag
Scroll arrows
Videos
Protected
Favorite tag
Email tag
Review mode
Album name
Protected
Print tag/number of prints
Picture number
Image storage location
Low battery
Video length
Video number
Image storage location
Scroll arrows
www.kodak.com/go/z1275support or z1285support 17
Page 18
urg_00732.book Page 18 Tuesday, October 9, 2007 6:27 AM
3Doing more with your camera
Using the Menu button to change settings
NOTE: Some settings remain until you change them; others remain until you turn off the camera.
1Press the Menu button.
2Press to highlight a menu tab:
■ Capture for the most common picture-taking settings.
■ Capture Plus for other picture-taking settings.
■Setup for other camera settings.
3Press to highlight a setting, then press the OK button.
4Choose an option, then press the OK button.
NOTE: Press the LCD/Info buttonfor information about camera settings and options. Some
capture modes (page 9) offer limited settings.
18www.kodak.com/go/easysharecenter
Page 19
urg_00732.book Page 19 Tuesday, October 9, 2007 6:27 AM
Doing more with your camera
P and M modes
Use Program and Manual modes when you want more control over your camera
and pictures.
to change modes
ModeFor
Ease of auto shooting with full access to most
menu options. The camera automatically sets the
Program
Manual
shutter speed and aperture (f-stop) based on the
scene lighting.
The highest level of creative control. (To prevent
blur, use a tripod for slow shutter speeds.)
Press to control
Exposure compensation (how
much light enters the camera),
Focus mode, and ISO speed
Aperture, shutter speed, focus
mode, and ISO speed
NOTE: Settings you change in P or M mode apply only to pictures taken in that mode. For example, if you
change the Color Mode to Sepia while in P or M mode, you retain the default setting of Color for
Smart scene and Scene modes.
The settings, including Flash, are maintained for P and M modes—even when you change modes or
turn off the camera.
www.kodak.com/go/z1275support or z1285support 19
Page 20
urg_00732.book Page 20 Tuesday, October 9, 2007 6:27 AM
Doing more with your camera
Changing P or M mode settings
P/M modes control ISO, Focus, exposure compensation, shutter speed, and aperture
(f-number, also known as f-stop). Use the Menu button to control all other settings.
P/M Options
White—selectable
Grey—non-selectable
Yellow—changeable value
Focus mode
ISO speed
Exposure compensation
Shutter speed
Aperture
Red—out of range
Mode
1Turn the Mode dial to P/M.
The mode options are displayed.
2Use to move between settings and to change the value.
NOTE: Some settings may be unavailable (see P/M color options above). The arrows disappear when you
cannot make further value changes.
3Take a picture.
20www.kodak.com/go/easysharecenter
Page 21
urg_00732.book Page 21 Tuesday, October 9, 2007 6:27 AM
Doing more with your camera
P/M mode—see page 19.
ISO speed—adjust the sensitivity to light. Higher ISO indicates greater sensitivity.
NOTE: A higher ISO may produce unwanted “noise” in a picture.
Exposure Compensation—adjust the exposure. If the picture is too light, decrease
the setting; if it’s too dark, increase the setting.
Shutter speed—control how long the shutter stays open.
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller f-stop numbers indicate a larger lens opening; good for portraits and
low-light conditions.
■ Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Focus mode—select a large or concentrated area of focus.
Focus mode Description
Normal AF Focus setting for general picture-taking.
Macro
InfinityDistant subjects. Auto-focus framing marks are unavailable.
Manual
Sharpness and detail in pictures at close range. The camera automatically
sets the focus distance depending on the zoom position.
Focus is at center position. When MF icon appears, press OK to display
focus indicator. Press
to adjust the setting.
www.kodak.com/go/z1275support or z1285support 21
Page 22
urg_00732.book Page 22 Tuesday, October 9, 2007 6:27 AM
4Solving camera problems
For step-by-step product support, visit www.kodak.com/go/z1275support or
z1285support and select Interactive Troubleshooting & Repairs.
Camera problems
IfTry one or more of the following
Camera does not
turn on.
Camera does not
turn off.
Short battery life
with Kodak Ni-MH
rechargeable
digital camera
batteries.
Shutter button
does not work.
■ Install new batteries (see page 1).
■ Charge rechargeable batteries.
■ Remove the battery, then reinsert or replace it. If the camera still does
not function, visit www.kodak.com/go/z1275support or z1285support
and select Interactive Troubleshooting & Repairs.
■ Wipe the contacts with a clean, dry cloth before loading batteries in
the camera.
■ Limit activities that deplete battery power: reviewing pictures/videos
and excessive use of the flash.
■ Use the Battery Refresh feature on your camera dock, printer dock, or
battery charger (if equipped).
■ Turn on the camera (see page 2).
■ Wait until the Ready light stops blinking red before attempting to take
another picture.
■ Transfer pictures to the computer (see page 5), delete pictures from
the camera (page 14), switch image storage locations, or insert a card
with available memory (page 8).
22www.kodak.com/go/easysharecenter
Page 23
urg_00732.book Page 23 Tuesday, October 9, 2007 6:27 AM
5Appendix
CAUTION:
Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to
qualified service personnel. Kodak AC adapters and battery chargers are intended for indoor use
only. The use of controls, adjustments, or procedures other than those specified herein may
result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not
touch the glass or liquid. Contact Kodak customer support.
■ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For
approved accessories, visit
www.kodak.com/go/accessories.
■ Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer
manufacturer if you have questions.
■ If using this product in an airplane, observe all instructions of the airline.
■ When removing the battery, allow it to cool; it may be hot.
■ Follow all warnings and instructions supplied by the battery manufacturer.
■ Use only batteries approved for this product to avoid risk of explosion. Do not charge non-rechargeable
batteries.
■ Keep batteries out of the reach of children.
■ Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit,
discharge energy, become hot, or leak.
■ Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.
■ Remove the battery when the product is stored for an extended period of time. In the unlikely event that
battery fluid leaks inside the product, contact Kodak customer support.
■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your
local health provider. For additional health-related information, contact your local Kodak customer support.
■ Dispose of batteries according to local and national regulations. Visit www.kodak.com/go/kes.
For more information on batteries, see www.kodak.com/go/batterytypes.
www.kodak.com/go/z1275support or z1285support 23
Page 24
urg_00732.book Page 24 Tuesday, October 9, 2007 6:27 AM
Appendix
Limited Warranty
Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be
free from malfunctions and defects in both materials and workmanship for one year from the date of purchase.
Retain original dated sales receipt. Proof of date of purchase is required with any request for warranty repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were originally purchased. You
may be required to ship Products, at your expense, to the authorized service facility for the country where the
Products were purchased. Kodak will repair or replace Products if they fail to function properly during the
warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all
labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a
Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been
returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase
price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may
be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it
may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted
for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement,
whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak’s control. This warranty does not apply when failure
is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with
incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak’s
operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and
cables), or claims made after the duration of this warranty. Kodak makes no other express or implied
warranty for this product, and disclaims the implied warranties of merchantability and fitness
for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law,
the duration of the implied warranty will be one year from the purchase date or such longer period as required
by law. The option of repair, replacement, or refund is Kodak’s only obligation. Kodak will not be responsible for
any special, consequential or incidental damages resulting from the sale, purchase, or use of this product
regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited
to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment,
facilities or services, or claims of your customers for such damages resulting from the purchase, use, or failure of
the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.
24www.kodak.com/go/easysharecenter
Page 25
urg_00732.book Page 25 Tuesday, October 9, 2007 6:27 AM
Appendix
Your right s
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be
different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company,
no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage,
or loss may be by negligence or other act.
Regulatory compliance
FCC compliance and advisory
Kodak EasyShare Z1275/Z1285 digital camera
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the
equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the
receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere defined to be used with the installation of
the product, they must be used in order to ensure compliance with FCC regulation.
www.kodak.com/go/z1275support or z1285support 25
Page 26
urg_00732.book Page 26 Tuesday, October 9, 2007 6:27 AM
Appendix
Australian C-Tick
N137
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact
your local authorities or go to
www.kodak.com/go/recycle for recycling program information.
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003.
Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
26www.kodak.com/go/easysharecenter
Page 27
urg_00732.book Page 27 Tuesday, October 9, 2007 6:27 AM
Korean Class B ITE
VCCI Class B ITE
Appendix
China RoHS
www.kodak.com/go/z1275support or z1285support 27
Page 28
urg_00732.book Page 28 Tuesday, October 9, 2007 6:27 AM
Appendix
MPEG-4
Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use
by a consumer engaging in personal and non-commercial activities.