Knog OI QUICK START GUIDE
THE BA S I C S
Oi! THIS IS A PRECISION INSTRUMENT
Treat with the same care that you would your
bike’s other parts: your spokes, your derailleurs,
If you’re in doubt about how to mount, use, or
troubleshoot the Oi, visit the Knog website or, of
course, your local bike shop.
Oi! GET IT ON
TAKE OUT THE Oi AND
1
REMOVE THE HEX BOLT
using the hex key provided.
If you have the Large Oi but a
2
23.8, 25.4, or 26mm diameter
bar you’ll need to put the
appropriate spacer on your
bar to make Oi sit flush. Make
sure gap faces straight up.
If your bar is 23.8mm, place the
rubber tape provided inside the
larger spacer.
MANUALLY OPEN THE
3
MOUTH OF THE MOUNT,
AND PUSH OVER THE
HANDLEBAR - if you can, fit
it around your cables, there’s a
Oi! GET IT ON
POSITION ON A
4
CYLINDRICAL PART OF
THE HANDLEBAR THAT
YOU FIND COMFORTABLE,
BUT IS NOT CURVED OR
TAPERED. We think close
to the handle/grip, so your
thumb can comfortably flick
the hammer.
SCREW IN THE HEX BOLT,
5
FIRM ENOUGH TO PREVENT
ANY ROTATION.
DO NOT OVERTIGHTEN.
Oi! DON’T FORGET
SIZE MATTERS:
O
L
i
L
A
M
S
22.2mm
only
O
E
i
F
G
I
R
T
23.8 - 31.8
mm
S
:
A
F
L
I
T
S
:
SHAPE MATTERS:
CYLINDRICAL
BAR
For more information
Pour plus d’information
Für weitere Informationen
Para más información
詳細については
K N O G. C O M . A U /O i
IF IN DOUBT ABOUT MOUNTING,
WATCH THIS VIDEO
2 years on materials and workmanship.
NOT SUITABLE
http://bit.ly/KnogOiQS
WARRANTY:
FOR AERO
Loading...