Klipsch R-1650-CSM User Manual
6.5” In-Ceiling Speaker
R-1650-CSM
Perfect for use in bathrooms, closets,
hallways or anywhere else multiple
speakers would be impractical, the
R-1650-CSM delivers powerful and
dynamic performances to some of the
most difficult installation locations.
The R-1650-CSM employs a 6.5-inch
polymer-cone woofer and a large motor
structure for high sensitivity and strong
bass output. Dual voice coils sum the low
frequencies from a stereo input to mono.
Upper frequencies are handled individually for the two channels by a coaxially
mounted dual-tweeter array, preserving
the stereo effect.
The speaker’s mounting system makes
installation a breeze, while its paintable
aluminum grille provides added rust
protection in moisture-prone areas such
as bathrooms, kitchens and saunas.
• Single speaker accepts two-channel input
• Separate tweeters for each channel to preserve stereo effect
• Paintable to match ceiling
• Packaged individually
S p e c i f i c a t i o n S
frequency response 50Hz-20kHz +/- 3dB
power handling 35 watts (140 watts peak)
sensitivity 87dB @ 2.83V/1 meter
nominal impedance 8 ohms compatible
drive components Two-way system using dual 1”
(2.5cm) polymer dome, tweeter and
one 6.5” (16.5cm) poly woofer
dimensions 9.5” (24.1cm)
cutout dimensions 8.3” (21cm)
While the R-1650-C will fit into our latest
IK-650-C installation kit, it can also be
used in conjunction with the ME-650-C
fire-rated enclosure.
installation kit IK-650-C (sold separately)
weight 5.3 lbs (2.4 kg)
accessories ME-650-C fire-rated enclosure
(sold separately)
built from 2006
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2007
Loading...