QUINTET SL SPEAKER SYSTEM
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9
. ONLY USE attachments/accessories specified by the
manufacturer.
10. USE only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
11. REFER all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture. The product must not be exposed to
dripping and splashing and no object filled with liquids - such as a
vase of flowers - should be placed on the product.
PLACEMENT
Before You Start – Some Klipsch speakers have feet and other
accessories that may need to be installed prior to use. Please
refer to Diagrams 1, 2, 3 and 4 for installation.
Left and Right Main Channel Speakers – For optimum
perf
ormance, place your speakers 6 to 15 feet (2 to 4.5m) apart
and at least 24 inches (60.8cm) from side walls. They may also
be toed-in slightly for better stereo imaging. The listening
position should be approximately 1 to 1.5 times the distance
separating the speakers. Refer to figures 1, 2 and 3 for
connection and placement.
Center Channel Speakers – Center channel speakers are
designed to place dialogue and primar
appear to come from the video screen. The speakers should
therefore be placed as close to the screen as possible, preferably
directly on top of or below the screen. Refer to figures 2, 3 and 4
for connection and placement.
Rear Surround Channel Speakers – Rear surround speakers
are designed to recrea
many of today’s surround sound technologies provide. Quintet
surround speakers can be placed on the wall directly adjacent to
or on the wall behind the listening position using the foot as the
mounting bracket. Refer to Diagram 4 and Figures 2 and 4 for
connection and placement.
CONNECTIONS
Conventional Connection – Using 16-gauge or larger speaker
wire,
connect the RED “positive” (+) terminal of the LEFT speaker
to the RED “positive” (+) terminal of your amplifier’s LEFT
channel. Connect the BLACK “negative” (-) terminal of the LEFT
speaker to the BLACK “negative” (-) terminal of your amplifier’s
LEFT channel. Repeat this procedure for connecting all remaining
speakers to the appropriate amplifier channels. Refer to Figure 4.
Make sure no bare wires from any of the connections touch any
other bare wires or terminals as this could cause a short and
damage your equipment.
te the sense of space and ambiance that
y sounds so that they
No naked flame sources - such as candles - should be placed on
the product.
WARNING: Voltages in this equipment are hazardous to life. No
user
-serviceable parts inside. Refer all servicing to qualified
service personnel.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’
IMPORTANT: Promptly inspect your speakers for any shipping
damage that may have occurred during transit. If you discover
any concealed shipping damage, please report it to your dealer
or the shipping company responsible for your product’s safe
transit. Keep all original cartons and packing material for future
safe transport.
s authority to operate this device.
Amplifier Requirements – Klipsch speakers are highly
ef
ficient and will work well with a wide variety of amplifiers. Due to the high output levels Klipsch speakers are
capable of reproducing, exercise caution with the volume control.
Excessive volume over long periods of time can permanently
damage your hearing. Overdriving your amplifier could also
damage your speakers. Check with your dealer to make sure
your particular amplifier is best suited to your application. We
want you listening for a lifetime.
CARE AND CLEANING
Your speakers have a durable finish that should only require dry
dusting.
Avoid use of abrasive or solvent-based cleaners and
harsh detergents. The brush attachment of your vacuum or a
damp cloth should remove any dust from your speaker grilles.