Klipsch Promedia DD-5.1 Owners manual

ProMedia™ DD-5.1

Multimedia Digital Decoder Preamplifer

Acknowledgement & Trademark

Acknowledgment & Trademark

All contents are subject to change at any time without notice. No responsibility is assumed for its use; or for infringements of patents or other rights of third parties and no patent or license is implied hereby. All trademarks are the property of their respective owners.

Manufactured under license from Dolby Laboratories. " Dolby", " ProLogic " and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. (c)1992 - 1997 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved.

Sony and PlayStation are trademarks of Sony Corporation. Nintendo is a trademark of Nintendo America, Inc.

FCC Compliance Statement

The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on. The used is encouraged to try to correct the interference by one or more of the following measure:

l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver.

l Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

l Consult the dealer or an experienced radio/TV technician for help.

Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications

Table of Contents

Introduction ------------------------------------------------------------------------------------------------4 Checking Package Contents --------------------------------------------------------------------------4 DD-5.1 Features -------------------------------------------------------------------------------------------5 Important Safety Instructions ------------------------------------------------------------------------5 Installation --------------------------------------------------------------------------------------------------6 DD-5.1 Front Panel ---------------------------------------------------------------------------------------7 DD-5.1 Rear Panel ----------------------------------------------------------------------------------------8 Connecting DD-5.1 (with External Power Amplifier) ------------------------------------------9 Connecting DD-5.1 (with our Promedia 5.1 Speaker System) -----------------------------10 DD-5.1 Remote Control ---------------------------------------------------------------------------------12 DD-5.1 Operation

LCD & LEDs ----------------------------------------------------------------------------------------------------13 LCD Display ----------------------------------------------------------------------------------------------------14 Mode Selection ------------------------------------------------------------------------------------------------14 Input Selection -------------------------------------------------------------------------------------------------15 Test Mode -------------------------------------------------------------------------------------------------------16 Mute Mode ------------------------------------------------------------------------------------------------------17 Master Volume Control --------------------------------------------------------------------------------------17 Balance Setting ------------------------------------------------------------------------------------------------18 Delay Calibration ----------------------------------------------------------------------------------------------19 Time Delay Adjustment on Center Channel Speaker ------------------------------------------------20 Time Delay Adjustment on Surround Speakers -------------------------------------------------------21 Pro Logic Mode ------------------------------------------------------------------------------------------------22 Speaker Mode with Bass Manager------------------------------------------------------------------------23 Saving Presets -------------------------------------------------------------------------------------------------25 Loading Presets -----------------------------------------------------------------------------------------------26 Sound Field Processing -------------------------------------------------------------------------------------27 Equalization -----------------------------------------------------------------------------------------------------28 DRC (Dynamic Range Compression) --------------------------------------------------------------------29 Resetting --------------------------------------------------------------------------------------------------------30

Troubleshooting-------------------------------------------------------------------------------------------31 Warranty -----------------------------------------------------------------------------------------------------32

In case of insurance claim, please make sure to record the Model Number and Serial Number printed on the real panel of the cabinet. The space below is provided for you to record the information.

Model Number: Serial Number: Purchase Date: Dealer Name:

Introduction

Thank you for purchasing DD-5.1 Surround Sound decoder. This versatile audio surround sound system is precisely crafted to bring you the most advanced surround modes including DTS, Dolby Digital & Dolby Pro Logic. This system will reproduce six discrete channels of encoded sound tracks with true fidelity and sonic excellence. The DD-5.1 automatically detects the type of signal present at each input and decodes it based on the original encoded software. DD-5.1 allows you to connect virtually any audio input sources such as TV, VCR, CD-ROM, DVD Player, LD Player, Stereo Receiver, PC and Game Consoles (Nintendo, Sony PlayStation, and SEGA), DD-5.1 is truly a dynamic multimedia theater center.

Checking Package Contents

Carefully unpack the DD-5.1 Surround Sound Decoder from the package and locate its contents. DD-5.1 Surround Sound Decoder x 1 DD-5.1 Owner’s Manual x 1 DD-5.1 Remote Control x 1 AC Adapter for Decoder (DC 12V, 1A) x 1 Adaptor Cable x 3

Note: Be sure to inspect the DD-5.1 from signs of damage due to shipping and handling. If you notice any damage or find any items missing, please contact Klipsch customer

service at 888-554-5665

DD-5.1 Features

- DTS

- Dolby Digital

- Dolby Pro Logic

- Bass management

- Sound field processing

- Equalization

Important Safety Instructions

To ensure your safety, please read these instructions before operating this unit.

1. Follow all instructions and warnings marked on the unit.

2. Always use the correct line voltage. Please refer to page 6, and find out the correct power requirements in your area. Please note that different operating voltages may require the use of different adapters.

3. Do not install the unit in an unventilated rack, or directly above heat producing equipment such as power amplifiers.

4. Please do not block the openings on both sides of the case for better ventilation.

5. To avoid shock or fire hazard, do not expose the unit to rain or moisture, or operate it where it will be exposed to water.

6. Do not attempt to operate the unit if it has been dropped, damaged, exposed to liquids, or if it exhibits a distinct change in performance indicating the need for service.

7. Only qualified service personnel should open this unit.

8. Removing covers will expose you to hazardous voltages.

9. Do not overload wall outlet, extension cords or integral convenience receptacles, as

this can result in a risk of fire or electrical shock.

10. Route power supply cords so that they are not likely to be walked on or pinched by

items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the unit.

Safety Voltage Chart:

Use the following chart to find out the correct adapter for your country:

Device

Voltage Frequency

AC 100 V 50/60 Hz DC 12V, 1A Japan

Input

Output Area

DD-5.1

AC 120 V 60 Hz DC 12V, 1A

AC 230 V 50 Hz DC 12V, 1A Europe/UK

North America/

Taiwan

Installation

l Turn off any electrical or computer device that you plan to connect to the DD-5.1. l Slowly unpack the DD-5.1 and its accessories from their packaging. l Place the DD-5.1 on a flat, stable surface, preferably on a T.V shelf, allow a space of

at least 10 cm above, behind and apart from any object.

l Locate the DD-5.1 near your source equipment so you can use the shortest possible

interconnect cables. Keep your DD-5.1 away from moisture sources such as open windows and heat sources such as hot air ducts radiators. Also, you should keep the unit away from direct sunlight since it could interfere with the remote control sensor.

l The DD-5.1 Surround Sound Decoder has a very flexible connectibility. It accepts

both digital and analog audio signals from CD Player, VCR, DVD player, TV monitor, Computer and Game Consoles (Nintendo N64, Sega Dream Cast, SONY PlayStation II etc.)

l DD-5.1 can be connected to an external amplifier or our Promedia 5.1 speaker

system; in page 9 and 10, different diagrams can clearly illustrate the proper installation of DD-5.1 depending on different audio sources, amplifiers and speakers.

DD-5.1 Front Panel

L C

POWER

2 4

SW SR

1. The POWER Button This button turns DD-5.1 ON or OFF.

2. The POWER Indicator This LED lights up when you plug in DC-12V.

3. Speaker Configuration LEDs Each LED represents the status of an individual channel. When a particular channel is active, the LED lights up. Red color LED light means this particular channel has been set to output a wider frequency range that contains bass signal between 20Hz to 120Hz. Green color LED light means this particular channel doesn’t contain the bass signal between 20Hz to 120Hz.

4. Front Panel Display This display provides you with important information regarding system status and settings. It is important to be familiar with all the indications on the display in order to have the system function properly.

DD-5.1 Rear Panel

LINEAUX 1AUX 2

OUTPUT

2 3 41

(c)

Connect the DD-5.1 adapter to an AC outlet. Please refer to page 6 to determine

SLSRC

DD-5.1 Rear Panel

1. G9 Audio Output:: (Not used with our Promedia 5.1 system)

This output feeds 6 channels audio signals; L (Front Left), R (Front Right), SL (Surround Left), SR (Surround Right), C (Center) & SW (Subwoofer) to the matching inputs on a control center or power amplifier via G9 (DIN) cable.

2. Main Outputs:

The Six outputs feed audio signals to the matching inputs on an external power amplifier, or via 3 adaptor cables to our Promedia 5.1 speaker system.

RLR

S/PDIF DC+12V

L (Front Left) R (Front Right) SL (Surround Left)

SR (Surround Right) C (Center) SW (Subwoofer)

3. Auxiliary and Line Inputs:

These inputs accept signals from stereo analog signal sources.

4. S/PDIF Digital Inputs:

DD-5.1 accepts two types of digital inputs. One set of optical input and another set of coaxial input. Connect the digital outputs of the sound sources to these inputs.

5. DC 12V Power Input:

the correct voltage in your area.

Connecting DD-5.1 (with External Power Amplifier)

DVD Player

Left

Surround

Left

Center

Surround

Right

External

Amplifier

L SL C SR R

Output

Input

Powered

Subwoofer

Game Consoles

Audio Out

Phone Jack

CD player

Audio Out

Play

Rec

OUTPUT

LRSLSRC

Coaxial digital Output

AUX 1

AUX 2

LRLRL

LINE

S/PDIF DC+12V

Digital

Coaxial

Optical

Audio Out

Connecting DD-5.1 ( with Promedia 5.1 Speaker System)

DVD Player

REAR

LEFT

REAR

RIGHT

FRONT

R/L

REAR

R/L

CENTER

SUB

Promedia 5.1Subwoofer Amplifier Panel

+ + +

INPUTS

Game Consoles

Audio Out

Phone Jack

CD player

Audio Out

Play

Rec

OUTPUT

LRSLSRC

Coaxial digital Output

AUX 1

AUX 2

LRLRL

LINE

S/PDIF DC+12V

Digital

Coaxial

Optical

Audio Out

1. After properly connecting DD-5.1 to your audio sources and amplifier, plug in DD-

5.1’s AC adapter to an AC outlet.

2. Turn on the power of DD-5.1 by pushing the POWER Button on the front panel.

+ 23 hidden pages