Klipsch KL 650 THX-L, KL 650 THX-R User Manual

Dual 6.5" Two-Way THX Ultra2 Certified LCR Loudspeaker

®

KL-650-THX

The KL-650-THX is a THX®Ultra2 certified
loudspeaker designed primarily for front left-,
center-, and right-channel reproduction in
large, ultimate-performance home theaters. It
can also be used for surround channels,
however, and is equally suitable for
combination home-theater/music systems
demanding superb sound and high output
capability. Its enclosure is front-ported to
facilitate installation in custom cabinetry, and
has back-panel threaded inserts compatible
with OmniMount®60.0 Series wall/ceiling
brackets.

The KL-650-THX design emerges directly
from Klipsch’s experience as a leading supplier
of cinema sound systems. A large, rectangular
90° x 60° Tractrix®Horn raises the efficiency
of the speaker’s 1-inch titanium-dome
compression driver tweeter and optimizes its
radiation pattern. The horn enables the
speaker to meet THX Ultra2 directivity
specifications without the lobing and comb­filtering effects that afflict conventional
multiple-tweeter solutions. And its dual 6.5­inch woofers have large, magnetically shielded
motor structures that drive rigid, low-mass
Cerametallic™ anodized-aluminum cones for
high output and low distortion.

SPECIFICATIONS

FREQUENCY RESPONSE 48Hz-20kHz ± 3dB

SENSITIVITY 97dB @ 2.83 volts / 1 meter

NOMINAL IMPEDANCE 8 ohms compatible

HF CROSSOVER 1400Hz
POWER HANDLING 150 watts maximum continuous

(600 watts peak)

ENCLOSURE TYPE Bass reflex via front-mounted port
ENCLOSURE MATERIAL Medium density fiberboard

construction (MDF)

TWEETER 1" (2.5cm) magnetically shielded titanium

dome compression driver with 9.6oz ceramic
magnet structure

HIGH FREQUENCY HORN 10" x 6" rectangular 90°x 60 °Tractrix®Horn
WOOFER Two 6.5" (16.5cm) magnetically shielded,

Cerametallic™ cone, cast aluminum
frame drivers

ts of binding post speaker terminals

o se

w

INPUT C

DIMENSIONS

WEIGHT 39 lbs. (17.7kg)
FINISH

MOUNTING 4-bolt pattern 1/4"-20 thread

ONNECTIONS

T
(connected via brass strap jumpers)

15" (38.1cm) H x 17" (43.2cm) W x 12.5"
(31.8cm) D (w/grille)

Galaxy Blac
aluminum fascia

k cabine

t with Black anodized

Construction is to the highest standard, with a
professional grade rabbet and dado locked
panel cabinet and premium components
throughout to ensure sonic purity, consistency,
and reliability

.

.klipsch.com

www

1-800-KLIPSCH

All specifications are subject to change without notice. ©2004