Klipsch KL-6504-THX User Manual
In-Wall Flat-Panel Loudspeaker
KL-6504-THX
• THX Select2-certied for superior sound
• Horn-loaded for high efciency and low distortion
• Sized for 42-inch and larger at-panel TVs
• Easily mounts horizontally or vertically
Never before has Klipsch offered such
premium performance in an in-wall speaker.
You’ll discover it delivers effortless dynamic
range and brings superior sound to larger
rooms thanks to its highly regarded THX
Select2 certification.
The KL-6504-THX employs four highoutput 5.25-inch fiberglass woofers for
powerful bass impact, while a 1-inch titanium tweeter mated to a new symmetrical
pattern 90 x 90 square Tractrix® Horn
generates flat in-room frequency response
with high efficiency and low distortion.
This exclusive horn design also allows the
speaker to consistently deliver unbeatable
sound, whether it’s installed horizontally or
vertically.
The KL-6504-THX’s titanium horn-loaded
tweeter is mated to the woofers using
precision-voiced, high-definition crossover
networks, creating high sensitivity. This
makes the speaker easier to drive, so it
requires a lot less amplification power than
conventional designs.
• Maximum installation reliability
• Mix and match with our other THX products
SpecificationS
Bandwidth 46 Hz - 20 kHz ± 3dB
Sensitivity 92 dB
Nominal Impedance 4 Ohms
Cross Over Frequency 250 Hz & 2100 Hz
Power Handling 150 Watts Cont. 600
Enclosure Type Infinite Baffle - Front Flush with Wall
Drive Components Two and a half way system utilizing
a 1” Titanium tweeter in a 4” 90x90
horn, and Two 5.25” Fiberglass
Woofers - THX Certified
Weight 18.3 lbs. / 8.3Kg
Height 28.5 in / 72.4cm
Width 8 in / 20.3cm
Depth 3.75 in / 9.5cm
Adding to its first-class sound, the KL-6504THX also has a premium look and feel with
its grille off, featuring a deluxe MDF baffle
with aluminum fascia. But when covered,
the speaker’s paintable grille allows it to
blend in perfectly with any home décor.
All-new sure-grip mounting dogs offer even
pressure against drywall for long-term installation reliability.
Furthermore, the KL-6504-THX comes with
a lot of options. It is timbre matched to all of
our THX-certified products, so you can mix
and match for the discreet stereo or home
theater system that’s just right for you.
Cutout Height 27.25 in / 69.2cm
Cutout Width 6.5 in / 16.5 cm
Material 0.14 in / 3.5 mm ABS
Finish White - Paintable
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Loading...