Klipsch KI-115 Brochure

HIGH POWER
SINGLE 15
"
LOW FREQUENCY
SPEAKER SYSTEM
Designed for high output, long-term
reliability, the Klipsch KI-115 low
K-48-EP cast frame 15" woofer.
This 95-ounce magnet, 3
"
voice coil
powerhouse delivers high sensitivity
with superior power handling.
Klipsch’s specially designed speaker
motor assembly ensures that high
transient cone excursions won’t
damage the voice coil former under
extreme output applications.
Perfect for music reinforcement and
reproduction, the KI-115 finds ready
application in clubs, theaters,
auditoriums, churches and
performance environments.
The rugged, tuned port, 9-ply
birch enclosure utilizes
CNC fabrication techniques for
uniform tolerances, contributing to
advanced reliability and ruggedness.
Dado “lock-tab” and rabbet joint
construction contribute to
freedom from resonance and
cabinet-induced coloration.
Signal connections are provided via
two parallel-wired Neutrik NL-4
Speakon panel mount jacks.
The KI-115 subwoofer utilizes
radiused top and bottom panels with
a curved perforated metal grille, and
is black dual texture-coated for
weather and corrosion resistance. The
KI-115 is available with or without
a passive crossover, and is compatible
with Klipsch KI-102, KI-172, KI-262
and KI-272 full-range professional
loudspeaker systems.
Like all KI Series speakers, the
KI-115 is covered by the Klipsch
limited five-year warranty.
KI-115
FREQUENCY RESPONSE
1
POWER HANDLING
2
MAXIMUM CONTINUOUS OUTPUT
3
DISPERSION ANGLE
DIRECTIVITY
SENSITIVITY
4
NOMINAL IMPEDANCE
COMPONENTS
ENCLOSURE MATERIAL
INPUT CONNECTIONS
DEPTH
HEIGHT
WIDTH
NET WEIGHT
SHIPPING WEIGHT
FINISHES
49-300Hz±4dB, -10dB 37Hz (see graph)
400 Watts (46V)
125dB
See Graph
See Graph
101dB
8 Ohms, 5.3 Ohms Minimum at 42Hz (see graph)
K-48-EP 15" Woofer
9-Ply Furniture Grade Birch Plywood
Two NL-4 Speakon Connectors Wired in Parallel
19.563" (49.69cm)
18.438" (46.833cm)
24.5" (62.23cm)
62 lbs. (28.148kg)
71 lbs. (32.234kg)
Black
1
3M, Half-space anechoic
2
AES Standard, continuous pink noise 40Hz-10kHz, 6dB peaks
3
Calculated at 1M at power handling power input
4
SPL at 1M, half-space anechoic with 2.83V input
Architectural Specifications
The KI-115 professional subwoofer shall include a single 15" (381mm) K-48-EP low-frequency transducer utilizing a 3" (76.2mm) voice coil and 95-ounce (3.23kg) magnet.
Frequency response shall be 49Hz to 300Hz, ±4dB, with the -10dB point at 37Hz, measured at three meters, half-space anechoic. Refer to graphs for horizontal and vertical dispersion angles and directivity. Sensitivity shall be 101dB SPL, measured at one meter, half-space anechoic, with a 2.83V input. Power handling shall be 400 watts (46 volts), to AES standards, continuous pink noise, 40Hz to 10kHz, 6dB peaks. Calculated maximum continuous output at one meter shall be 125dB SPL. Nominal impedance shall be 8 ohms, with 5.3 ohms minimum at 42Hz.
Signal connections shall be made via two parallel­wired Neutrik NL-4 Speakon panel mount jacks. The enclosure panels shall be CNC-fabricated, 18mm, 9-ply birch plywood, assembled utilizing rabbet and dado joinery. Dimensions for the enclosure shall be
18.438" (46.833cm) high by 19.563" (49.69cm) deep by
24.5" (62.23cm) wide in a
rectangular shape. Net weight
shall be 62 lbs. (28.148kg).
The top and bottom panels shall be radiused, with a curved metal perforated grille for structural integrity and protection of the transducers from impact and tam­pering. The enclosure tuning shall be of a vented design. The enclosure finish shall be lacquer-based primer and lacquer-based texture paint with a black finish.
The system shall be a Klipsch KI-115 loudspeaker.
Specifications
5M0203
190545 (Rev. 2)
Front View
Left Side View
Right Side View
Top View
Bottom View
12.250 Ref
12.250 Ref
14.762
9.712
19.563 Ref
9.250
10.125
19.563 Ref
10.125
9.250
8.500
8.500
This symbol represents the center of gravity.
Back View
24.500 Ref
18.438 Ref
6.039
12.589
High power 15" cast frame woofer
Compact heavy-duty, 13-ply Baltic Birch
enclosure
Weather-resistant, dual-coat textured
black finish
101dB sensitivity, 125dB SPL output
400 watt power handling capability
Two Neutrik NL-4 Speakon connectors
Dado “lock-tab” and rabbet joint construction
Only 19" X 25" X 20"
©2003 Klipsch Audio Technologies. All rights reserved. Specifications subject to engineering changes.
3502 Woodview Trace, Suite 200
Indianapolis, IN 46268
P. O . Box 688
Hope, AR USA 71801
1-800-KLIPSCH • www.klipsch.com
Horizontal 1/3 Octave Polars
KI-115
Vertical 1/3
Octave Polars
Frequency Response
Impedance
HIGH POWER SINGLE 15
"
LOW FREQUENCY SPEAKER SYSTEM
Horizontal Off-Axis Transfer Function
Directivity Index
Horizontal Coverage (-6dB)
Vertical Coverage (-6dB)
Vertical Off-Axis Transfer Function UP
60
55
50
45
40
35
30
25
20
15
10
5
0
10
15
23
345177
114
173
258
390
581
876
1309
1979
2991
4459
6739
10047
15185
Ohms
Frequency
115
105
95
85
75
2029426188
127
183
267
383
558
802
1168
1679
2443
3557
5113
7442
10698
15572
dB
Frequency
12
6
0
-6
-12
-18
-24
-30
0 10 20 30 40
203250
80
127
202
320
508
806
1280
2032
3225
5120
8127
12902
20480
dB
Frequency
12
6
0
-6
-12
-18
-24
-30
0 10 20 30 40
203250
80
127
202
320
508
806
1280
2032
3225
5120
8127
12902
20480
dB
Frequency
360
315
270
225
180
135
90
45
0
203250
80
127
202
320
508
806
1280
2032
3225
5120
8127
12902
20480
Coverage angle
Frequency
360
315
270
225
180
135
90
45
0
203250
80
127
202
320
508
806
1280
2032
3225
5120
8127
12902
20480
Coverage angle
Frequency
20
18
16
14
12
10
8
6
4
2
0
20
32
50
80
127
202
320
508
806
1280
2032
3225
5120
8127
12902
20480
dB
Frequency
Loading...